hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
22,698 Commits
1 Branch
0 Tags
129 MiB
Commit Graph

1436 Commits (a1c1818142382b07cfd039dd2d8227ed54b02831)

Author SHA1 Message Date
Gabor Juhos fd7bd75c16 ar71xx: merge DIR-600 A1 and DIR-615 E4 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29976 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:29 +00:00
Gabor Juhos 129be88f0d ar71xx: fix ethernet LEDs on the DIR-600-A1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:24 +00:00
Gabor Juhos 4946900ecc ar71xx: unify LED names on D-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29974 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:15 +00:00
Gabor Juhos 780aecc9ca ar71xx: support for D-LINK DIR-615 rev. E4 
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:09 +00:00
Gabor Juhos 0e45b3367c ar71xx: add support for TP-Link TL-MR11U 
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:01 +00:00
Gabor Juhos f25655b13b ar71xx: compress kernel binaries in Image/Prepare stage 
The lzma compressed kernel is used by one of the loaders.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:36:54 +00:00
Gabor Juhos f9e8748d57 ar71xx: use dynamically allocated partitions in wrt160nl_part 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29970 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:36:51 +00:00
Florian Fainelli c003d83f1a [ar71xx] add support for the Atheros AP113 reference board 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-28 13:19:49 +00:00
Florian Fainelli 906dfaac14 [ar71xx] refresh 3.2 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-28 13:19:43 +00:00
Gabor Juhos c82034b4c9 ar71xx: use 64k block size for WZR-HP-AG300H 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-27 10:42:41 +00:00
Gabor Juhos 1727dca60a ar71xx: fix sysupgrade image building of atheros boards after r29899 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-27 07:51:09 +00:00
Gabor Juhos 9ae562846f ar71xx: create the temporary directory before building initramfs images 
Thanks to Florian for reporting.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-26 21:28:34 +00:00
Gabor Juhos d8bb980f47 ar71xx: create a profile and build images for Compex WPE72 
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-26 17:01:44 +00:00
Gabor Juhos ede9030b02 ar71xx: add support for Compex WPE72/WPE72NX 
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-26 17:01:41 +00:00
Gabor Juhos e55bf8c335 ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour 
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-25 07:44:45 +00:00
Gabor Juhos 47e45167d9 ar71xx: TL-MR3020: fix GPIO polarity for button and switch 
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-25 07:44:43 +00:00
Gabor Juhos cb51e6c0d7 ar71xx: use the lzma loader on the Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 20:12:10 +00:00
Gabor Juhos 1c279ca34e ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 20:12:08 +00:00
Gabor Juhos 2ca85663ea ar71xx: fix the AP/Router LED definitons on MZK-W300NH 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:38 +00:00
Gabor Juhos 0353e85c26 ar71xx: preset WLAN LED config on MZK-W300NH 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:36 +00:00
Gabor Juhos 98cfb744db ar71xx: remove hardcoded MTD layout from planex files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:34 +00:00
Gabor Juhos bd7d55d8ed ar71xx: pass mtdlayout to Planex boards via command line 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:33 +00:00
Gabor Juhos 352efddfa0 ar71xx: remove an unused header file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:31 +00:00
Gabor Juhos 6536036506 ar71xx: nuke fs_all variable in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:25 +00:00
Gabor Juhos 0ee87255f5 ar71xx: create interim kernel files in a separate dir 
This reduces the size of the ImageBuilder tarball a lot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:23 +00:00
Gabor Juhos cb618e5c95 ar71xx: prebuild all loaders in Image/Prepare stage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:22 +00:00
Gabor Juhos 019a86ebc3 ar71xx: 3.2: fix build errors if PCI is not enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-23 08:52:21 +00:00
Gabor Juhos 0dc4edde27 ar71xx: fix compiler warning if PCI is not enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-23 08:52:18 +00:00
Gabor Juhos fa34189a17 ar71xx: add initial support for 3.2 
Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:38:19 +00:00
Gabor Juhos 2899e54bd7 ar71xx: move arch specific files to files-2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:38:11 +00:00
Gabor Juhos 31ac2df946 ar71xx: build ALFA AP96 images with default profile as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:33:15 +00:00
Gabor Juhos 5a804a0710 ar71xx: wrt160nl_part: include module.h and fix compiler warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 17:55:38 +00:00
Gabor Juhos 77681dfda2 ar71xx: tplinkpart: include module.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 17:55:36 +00:00
Gabor Juhos 69c5ec5805 ar71xx: rename vsc7385 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:57 +00:00
Gabor Juhos 57182d0623 ar71xx: rename ap81 spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:56 +00:00
Gabor Juhos 9c5fd0809f ar71xx: rename rb4xx spi drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:54 +00:00
Gabor Juhos 99e5d01717 ar71xx: rename the nxp_74hc153 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:52 +00:00
Gabor Juhos c72cb530b3 ar71xx: change board id of the UniFi board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:50 +00:00
Gabor Juhos 0ddf352708 ar71xx: include linux/module.h in the micrel phy driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:49 +00:00
Gabor Juhos cb544f1fd3 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 18:00:50 +00:00
Gabor Juhos 510237b282 ar71xx: disable ath79 in order to get rid of Kconfig warnings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:19 +00:00
Gabor Juhos c7cf50257f ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:18 +00:00
Gabor Juhos d4f8c16d01 ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:17 +00:00
Gabor Juhos a1de404466 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:15 +00:00
Gabor Juhos aeeb859e58 ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:14 +00:00
Gabor Juhos ad96a5a37b ar71xx: ar71xx_spi: save and restore regs from probe/remove 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:13 +00:00
Gabor Juhos 55412d0e9e ar71xx: ar71xx_wdt: add shutdown handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-11 09:14:11 +00:00
Gabor Juhos 06a14f561a ar71xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:43 +00:00
Gabor Juhos f9d78517ad ar71xx: add a profile and build images for the TL-WR2543N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:42 +00:00
Gabor Juhos 8782a469c8 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:35 +00:00
Gabor Juhos ce48dfe9f2 ar71xx: allow to specify max read size for m25p80 
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:33 +00:00
Gabor Juhos c64226d2ad ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 17:24:44 +00:00
Gabor Juhos 1f6caadd70 generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 16:29:16 +00:00
Gabor Juhos 363361428e ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 15:54:59 +00:00
Gabor Juhos a128548072 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
Gabor Juhos 4052a864ee ar71xx: fix RB-750 network configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:54 +00:00
Gabor Juhos 881581493f ar71xx: fix sections mismatch warnings in the nand drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:33 +00:00
Gabor Juhos 9bcaf204ee ar71xx: fix LED configuration on the RB-750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-05 18:08:28 +00:00
Gabor Juhos df72f38897 ar71xx: create profile and build image for the ALFA AP96 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:57 +00:00
Gabor Juhos 2d696ce97e ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:54 +00:00
Gabor Juhos 5c8819fc34 ar71xx: specify console kernel parameter for the Compex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:59 +00:00
Gabor Juhos 3eeb7b7a5b ar71xx: allow to use the command line hack on compex devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:58 +00:00
Gabor Juhos 97682e0944 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
Gabor Juhos a53822baf4 ar71xx: show correct model name on TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:55 +00:00
Gabor Juhos e1cde7e2f2 ar71xx: add profile and build image for the TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:54 +00:00
Gabor Juhos d18016e1c8 ar71xx: fix network configuration for the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:52 +00:00
Gabor Juhos bf40a234de ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:50 +00:00
Gabor Juhos 0baf809de3 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:49 +00:00
Gabor Juhos 2526c08008 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
Gabor Juhos 4be5cd66f3 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:41 +00:00
Gabor Juhos 70c438bb93 ar71xx: add profile and build factory image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:29 +00:00
Gabor Juhos c3f617ef35 ar71xx: build images for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:28 +00:00
Gabor Juhos 674aa34176 ar71xx: add support for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:25 +00:00
Gabor Juhos 859e59397b ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:46 +00:00
Gabor Juhos 118232a591 ar71xx: enable SWCONFIG_LEDS 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:40 +00:00
Gabor Juhos 9bf3904856 ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 15:02:26 +00:00
Gabor Juhos be7cbae844 ar71xx: fix LEDs on the WRT400N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-31 13:54:11 +00:00
Gabor Juhos 8a4dd9c10f ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:59:43 +00:00
Gabor Juhos 22e9d33e1c ar71xx: fix sysupgrade on PB42/PB44 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-27 16:57:01 +00:00
Felix Fietkau 5f97cea3f0 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-22 05:43:53 +00:00
Jonas Gorski a5fdbc09b3 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 19:32:40 +00:00
Jo-Philipp Wich 26415b5f86 [ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-21 01:27:48 +00:00
Felix Fietkau 7e96983fe1 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-19 09:04:15 +00:00
Felix Fietkau b809bbc100 ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
Gabor Juhos 3894ae522a ar71xx: use 64kraw template on more TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-17 18:49:55 +00:00
Gabor Juhos e5d5ffcbc2 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:38 +00:00
Gabor Juhos 10a219ed66 ar71xx: add defines for the AR934X GMAC interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:36 +00:00
Gabor Juhos 2b1b2e492f ar71xx: fix GMAC1 interface speed on the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:35 +00:00
Gabor Juhos 56a02cffed ar71xx: ag71xx: fix switch port setup for AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:32 +00:00
Gabor Juhos 5039a01b61 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:30 +00:00
Gabor Juhos 59e650a276 ar71xx: ag71xx: setup switch interface mode on AR934X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:29 +00:00
Gabor Juhos 3f45ffd8f2 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:28 +00:00
Gabor Juhos 01036f2eae ar71xx: allow to attach the internal switch for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:22 +00:00
Gabor Juhos 691b20bcaf ar71xx: introduce ar71xx_switch_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:25:11 +00:00
Gabor Juhos 1c234742d6 ar71xx: build images for TL-WR741N/ND v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:48 +00:00
Gabor Juhos ac0030116e ar71x: use raw squashfs images for TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:46 +00:00
Gabor Juhos 178dfb1db9 ar71xx: create a template for using unpadded squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:45 +00:00
Gabor Juhos 3b391aa04c ar71xx: put squash image right after the kernel on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:44 +00:00
Gabor Juhos c0f856759b ar71xx: tplinkpart: allow to detect JFFS2 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:40 +00:00
Gabor Juhos bc40f1dc75 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00