a0b3bb7c0a
libpcap: fixup libtool
...
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2017-12-07 12:39:56 +01:00
1fea0d89f5
CC: kernel: update to 3.18.45, refresh targets
...
Compile-tested on ar71xx, imx6, lantiq, mvebu
Runtime-tested on sunxi.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-12-19 14:19:47 +01:00
c170d84bbe
Merge pull request #264 from wigyori/cc-dm9601
...
CC: brcm2708: Fix Kernel Panic: DM9601 Fast Ethernet Adapter
2016-12-18 12:36:52 +01:00
6ee59728b9
CC: brcm2708: Fix Kernel Panic: DM9601 Fast Ethernet Adapter
...
The dm9601 driver expects to receive a single encapsulated ethernet
frame from the device in one URB transfer, and it provides an URB
buffer of length 1,522 to receive it. This is not a round multiple
of USB transfer packets.
The device in question [1] provides a stream of such frames and it
does not conveniently slice them up as the dm9601 driver expects. We
can end up with 1,536 (0x600) bytes returned by the device in response
to the URB request. This may include several encapsulated ethernet
frames, and/or fragments thereof.
It seems to me that the kernel 'Oops' arises because the dwc_otg driver
does not notice that the destination buffer is too small to receive the
full 1,536 bytes. Comparing dwc_otg's update_urb_state_xfer_comp with
dwc2's dwc2_update_urb_state is suggestive.
More details: https://github.com/raspberrypi/linux/issues/1045
All Credits to: https://github.com/mw9
Signed-off-by: Marian Hello <marian.hello@gmail.com>
Reviewed-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-12-07 17:06:47 +01:00
e5a8ed3eff
Merge pull request #247 from gadkrumholz/chaos_calmer-e2100l
...
CC: ar71xx: Added missing support for Linksys E2100L
2016-11-30 21:19:52 +01:00
d9740d24d7
CC: ar71xx: Added missing support for Linksys E2100L
...
It's based on the WRT160NL according to https://wiki.openwrt.org/toh/linksys/e2100l
Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244 and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch was conceived.
Signed-off-by: Gad Krumholz <gad.krumholz@gmail.com>
2016-11-30 00:47:10 -06:00
1b6dc2e48c
Merge pull request #189 from NeoRaider/fix-leds
...
CC: ar71xx: fix syntax error in /etc/uci-defaults/01_leds
2016-11-08 12:16:36 +01:00
efffd3c32a
CC: ar71xx: fix syntax error in /etc/uci-defaults/01_leds
...
Fixes f98117a
2016-11-06 12:53:38 +01:00
0f757bd260
Merge pull request #158 from Shalzz/chaos_calmer
...
CC: ar71xx: backport LED fix for TL-WR841N-v11
2016-10-29 00:32:16 +02:00
f98117a065
CC: ar71xx: backport LED fix for TL-WR841N-v11
...
Signed-off-by: Shaleen Jain <shaleen.jain95@gmail.com>
2016-10-28 21:14:27 +05:30
c4ce8c716c
Merge pull request #141 from mumuqz/chaos_calmer
...
CC: ar71xx: Add support to DomyWifi DW33D
2016-10-28 17:27:07 +02:00
a8a1e2a19a
CC: ar71xx: Add support to DomyWifi DW33D
...
Signed-off-by: Jing Lin <mumuqz@163.com>
2016-10-28 23:00:21 +08:00
1378f4a4d9
Merge pull request #151 from wigyori/cc-dirtycow
...
CC: generic: bump kernel to 3.18.44
2016-10-26 15:33:07 +02:00
2c54d989b4
CC: generic: bump kernel to 3.18.44
...
Patch 610- is updated as check_entry helper was killed in 3.18.37
Fixes CVE-2016-5195 (dirtycow)
Compile-tested on ar71xx, mxs, sunxi, imx6
Runtime-tested on ar71xx (PB42)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-10-25 22:58:12 +02:00
2aefb514a4
mvebu: bugfixes for rango
...
backport of ce116bc6f997d8d6e6b976cacce5d4c60d705fc6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-18 11:43:26 +02:00
a55319cca0
mwlwifi: install the 88W8964 firmware, too
...
backport of 67d3ba0c7c91c0a2fb0cbd768d3a75db2246de80
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-16 00:15:40 +02:00
fa885ed5db
mvebu: add support for the Linksys WRT3200ACM (Rango)
...
backport of 50e627ac06112eb633222cc72af5c4fe60f3dbb9
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-13 13:01:24 +02:00
af4877f6fd
mwlwifi: upgrade to 10.3.2.0-20161013
...
backport of 2055b43f78c8ff74fe513a1fdaf5a10481faac6f
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-13 13:00:19 +02:00
b41b40c00d
hostapd: add interoperability workaround for 80+80 and 160 MHz channels
...
backport of f9fc9c242fa62c214dc4a92bd89ca9a36bc8308c
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-13 12:59:10 +02:00
8a1f7c9d55
Merge pull request #124 from sartura/chaos_calmer-upstream-relocation
...
odhcp* upstream relocation
2016-10-11 10:28:15 +02:00
609ebc43be
odhcpd: update to git HEAD
...
This change also reflect relocation of upstream project which has been
moved to OpenWrt GitHub organization.
Signed-off-by: Hrvoje Varga <hrvoje.varga@sartura.hr>
2016-10-11 08:00:11 +00:00
901885e34c
odhcp6c: update to git HEAD
...
This change also reflect relocation of upstream project which has been
moved to OpenWrt GitHub organization.
Signed-off-by: Hrvoje Varga <hrvoje.varga@sartura.hr>
2016-10-11 07:59:49 +00:00
b21852c60f
Merge pull request #116 from imShara/fix_feeds
...
scripts: feeds: fix version detection for Make >= 4.2.1
2016-10-09 21:13:55 +02:00
aab91be7b2
scripts: feeds: fix version detection for Make >= 4.2.1
...
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05 22:10:18 +03:00
ca3f1a614a
Merge pull request #105 from wigyori/chaos_calmer
...
CC: openssl security upgrade, sync updates from git.openwrt.org/chaos_calmer
2016-09-29 15:49:20 +02:00
f9755e2877
mac80211: brcmfmac: backport changes from 2016-09-27
...
This fixes memory leaks, some possible crashes and bug that could cause
WARNING on every add_key/del_key call. It also replaces WARNING with
a simple message. They may still occur e.g. on station going out of
range and A-MPDU stall in the firmware.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-29 14:59:38 +02:00
bc00413221
mac80211: brcmfmac: backport patches that were skipped previously #2
...
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-29 14:58:53 +02:00
396e838bd6
mac80211: brcmfmac: backport patches that were skipped previously #1
...
They are necessary for further fixes and improvements otherwise recent
patches don't apply.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-29 14:26:20 +02:00
1016f38a86
mwlwifi: upgrade to 10.3.0.18-20160804
...
adds support for the Linksys WRT1900ACSv2 and WRT1200ACv2
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-09-29 14:24:56 +02:00
3bf4b214e8
mac80211: brcmfmac: backport patch simplifying brcmf_alloc_vif
...
This is quite trivial and will be required for VIF fixes in the future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:24:14 +02:00
99ed5200c0
mac80211: brcmfmac: fix stopping netdev queue when bus clogs up
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:23:54 +02:00
718c539199
mac80211: brcmfmac: support hidden SSID
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:23:32 +02:00
84ea6e0315
ramips: fix usb phy initialisation
...
this broke usb20 device detection.
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-29 14:23:08 +02:00
b5e7d8a212
ramips: fix timing issues when using MT7621 spi
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-29 14:22:40 +02:00
b0c59f5629
mac80211: brcmfmac: fix interfaces management
...
To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.
Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:21:52 +02:00
e7d2443743
CC: kernel: update kernel 3.18 to version 3.18.36
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-09-29 14:21:21 +02:00
067545b374
rpcd: iwinfo plugin fixes
...
- Expose supported HT rate information in info call
- Zero out ccode buffer when listing countries
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:20:27 +02:00
a047169f9d
mac80211: brcmfmac: fix lockup related to P2P interface
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-09-29 14:19:44 +02:00
29fcc94c9a
CC: openssl: update to 1.0.2j
...
Security fixes:
* (Severity: High) OCSP Status Request extension unbounded memory growth (CVE-2016-6304)
* (Severity: Moderate) SSL_peek() hang on empty record (CVE-2016-6305)
* (Severity: Moderate) Missing CRL sanity check (CVE-2016-7052)
* 10 Low severity issues
Security advisories:
https://www.openssl.org/news/secadv/20160922.txt
https://www.openssl.org/news/secadv/20160926.txt
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-09-29 07:29:15 +02:00
d6b3ca24c5
Merge pull request #82 from ecsv/openmesh-cc
...
OpenMesh MR1750(v2) and OM2P-HSv3 support for Chaos Calmer
2016-09-21 21:13:17 +02:00
3411c9a885
ar71xx: add MR1750v2 to the MR1750 profile
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
21560ae52e
ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
b6c8710aa7
package/uboot-envtools: add OpenMesh MR1750v2 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
9f2256a4d4
package/om-watchdog: add OpenMesh MR1750v2 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
82d0eae9b2
ar71xx: enable sysupgrade for the OpenMesh MR1750v2
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
c02d2e3885
ar71xx: add user-space support for the OpenMesh MR1750v2
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
7599f56630
ar71xx: add kernel support for the OpenMesh MR1750v2
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
563eb0eaba
ar71xx: add OM2P-HSv3 to the OM2P profile
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
eeaa319a63
package/uboot-envtools: add OpenMesh OM2P-HSv3 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
d461f84d6e
package/om-watchdog: add OpenMesh OM2P-HSv3 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-21 18:16:54 +02:00
Steven Barth
Zoltan HERPAI
Marian Hello
Gad Krumholz
Matthias Schiffer
Shaleen Jain
Jing Lin
Imre Kaloz
Luka Perkov
Hrvoje Varga
Jo-Philipp Wich
Rafał Miłecki
John Crispin
Hauke Mehrtens
Sven Eckelmann