Commit Graph

2260 Commits (9c6e3687b763497f86f14d0df9daf85f04ea9f60)

Author SHA1 Message Date
Gabor Juhos 51cd1a33de kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-27 07:19:21 +00:00
Felix Fietkau b2e35bbd7b build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-26 17:53:14 +00:00
Gabor Juhos 593f0bb174 ar71xx: use correct board id for TL-MR3040 v2
Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 18:42:14 +00:00
Gabor Juhos 82904232f6 ar71xx: add user-space support for TL-MR3040 v2
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 18:42:11 +00:00
Gabor Juhos f5eb50ac7e ar71xx: improve kernel support for the TL-MR3040 v2
This patch adds support for the hardware slide switch on
the TL-MR3040 v2.

Signed-off-by: Mads Hansen <d@taba.se>
[juhosg: use EV_SW instead of EV_KEY]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 18:42:10 +00:00
Gabor Juhos 028cf4dc7c kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 17:13:24 +00:00
Gabor Juhos d39a5bff68 ar71xx: image: simplify mynet_n600_mtdlayout
Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:

  0x000000070000-0x000000ff0000 : "firmware"
  2 seama-fw partitions found on MTD device firmware
  0x000000070000-0x0000001b0000 : "kernel"
  0x0000001b0000-0x000000ff0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  1 squashfs-split partitions found on MTD device rootfs
  0x000000360000-0x000000ff0000 : "rootfs_data"
  0x000000ff0000-0x000001000000 : "radiocfg"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 12:19:57 +00:00
Gabor Juhos c8f6f29505 ar71xx: enable the Seama firmware parser
It will be used for the WD My Net N600 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 12:19:54 +00:00
Gabor Juhos 6f78432c12 ar71xx: update the Image/Build/WZRHP macro
- append the root squashfs directly after the kernel,
 - use the 64kraw/128kraw template instead of the 64k/128k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on WZR-HP-G300NH and WZR-600DHP boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 09:36:26 +00:00
Gabor Juhos ea55acf64d ar71xx: image: use a common macro for Buffalo WZRHP devices
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 09:36:25 +00:00
Gabor Juhos 8922a20ab9 ar71xx: image: update Image/Build/CameoAP94 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-673GRU board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 08:14:44 +00:00
Gabor Juhos 5a6ca06c0d ar71xx: image: use a common macro for Cameo AP94 based devices
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 08:14:43 +00:00
Gabor Juhos 528cbc4a87 ar71xx: image: use the board name for temporary mtdpart files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 06:13:14 +00:00
Gabor Juhos 22e1fba31c ar71xx: update the Image/Build/UBNT2 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a WispStation M5 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 05:58:34 +00:00
Gabor Juhos bd0c886b58 ar71xx: build intramfs images for the Ubiquiti XM boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 05:58:32 +00:00
Gabor Juhos d7ebcb828c ar71xx: image: use a common macro for UBNTXM/UBNTDEV
The firmware generation part is the same for both
macros. Move that into a separate macro and use the
new macro for Image/Build/UB{NTXM,DEV}.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 05:58:31 +00:00
Gabor Juhos b9c7eca559 ar71xx: image: update Image/Build/WHRHPG300N macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the WHR-G301N board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 19:49:27 +00:00
Gabor Juhos e88f97b1c6 ar71xx: image use the 64kraw template for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 12:54:05 +00:00
Gabor Juhos d1bb32ab5d ar71xx: image: update Build/Image/Planex macro
- remove the 'kernel' and 'rootfs' partitions from the mtd layout,
 - move the .okli image into the uImage,
 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the MZK-W300NH board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 12:14:20 +00:00
Gabor Juhos 235649b44b ar71xx: image: allow to build initramfs for Planex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 12:14:19 +00:00
Gabor Juhos 94af2f3b5a ar71xx: image: build Planex kernels in a separate step
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 12:14:18 +00:00
Gabor Juhos 11ede13211 ar71xx: add profile and build image for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 09:49:04 +00:00
Gabor Juhos a7d58e9791 ar71xx: add user-space support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 09:49:02 +00:00
Gabor Juhos 8f083deaab ar71xx: add kernel support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 09:49:01 +00:00
Gabor Juhos 92b4d1552c ar71xx: image: update the Image/Build/CameoHornet macro
- append the root squashfs directly to the kernel,
 - use the 64kraw-nojffs template instead of sqashfs-only
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-712BR devices only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 09:22:50 +00:00
Gabor Juhos 37d9674a75 ar71xx: update the Image/Build/Cameo macro
- append the root squashfs directly to the kernel,
 - use the 64kraw/64kraw-nojffs template instead of 64k/squashfs-only,
 - ensure, that the signature is placed at the correct offset in
   the *-factory images,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on DIR-600-A1 and TEW-632BR devices only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 09:01:06 +00:00
Gabor Juhos 13bb9446f0 ar71xx: image: add new macros for AP99 based Cameo devices
The MTD layout of the AP99 based devices is different.
Add new macros to reflect that and use the new macros
for the DIR-615-E4 board.

This prevents overwriting of the 'mac' partition which
contain vital informations. The disadvantage of the change
is that the usable space is reduced by 192KiB. Blame the
vendors for the unfriendly partition layout.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 08:24:10 +00:00
Gabor Juhos 34fb40a7d5 ar71xx: image: rename the Cameo macros
Use the reference board name in the macro
instead of the SoC number.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-23 08:24:05 +00:00
Gabor Juhos 70dc6a49ff ar71xx: image: add optional JFFS2 padding support to the CatFiles macro
Also remove the similar code from the Netgear
profile and use the new feature instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 20:14:23 +00:00
Gabor Juhos ccc96f79d5 ar71xx: image: remove too big files in the CatFiles macro
Also improve the warning message.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 20:14:22 +00:00
Gabor Juhos f0113406ea ar71xx: simplify wndr3700 image generation
- remove the kernel and rootfs partitions from the mtd layout,
   the kernel creates those automatically,
 - remove estimation step, it is not needed anymore
 - put the root squashfs directly after the kernel
 - use the 64kraw template

With the default configuration, this allows to use more space for
rootfs_data with 64KiB. Tested on WNDR3700 v1 only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 11:45:09 +00:00
Gabor Juhos 4ae07d64e7 ar71xx: use the separate rootfs and uImage parsers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 11:45:08 +00:00
Gabor Juhos bf3a81fdcd ar71xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 11:45:06 +00:00
Gabor Juhos e993d5739e ar71xx: image: add mtdpartsize macro
The new macro will be used to determine the firmware
partition size from an MTD layout.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 09:11:25 +00:00
Gabor Juhos 4f5f42fcf9 ar71xx: image: improve the rootfs_align macro
Improve the macro to return correct value for
all squashfs variant.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 09:11:24 +00:00
Gabor Juhos 8609d082e4 ar71xx: image: improve the CatFiles macro
Make it possible to append the rootfs image directly
to the kernel.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-22 09:11:22 +00:00
Gabor Juhos 369175045a ar71xx: enable wlan2g led in the default configuration of dir-825-c1
Enable the wlan2g led in the default configuration of dir-825-c1.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4079/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 16:08:45 +00:00
Gabor Juhos 1c81977013 ar71xx: vanity changes for dir-825-c1
This patch

- changes the color names from orange to amber
- changes the name of GPIO 13 from WIFI_BGN (wifi_bgn) to WLAN_2G
  (wlan2g) to be more consistent with the other routers' files
- changes the descriptions of the hardware keys to be a tad more
  explicit

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4081/
[juhosg: update the LED migration script as well]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 16:08:44 +00:00
Gabor Juhos 46436e721a ar71xx: diag.sh: consolidate netgear device entries
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:57 +00:00
Gabor Juhos c1585ec773 ar71xx: use the green power led for diag on the WNR2200 board
Make it consistent with the other Netgear boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:56 +00:00
Gabor Juhos 0d1c23f2ca ar71xx: use netgear prefix for WNDAP360 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:55 +00:00
Gabor Juhos a41829e342 ar71xx: use netgear prefix for WNR612 v2 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:54 +00:00
Gabor Juhos 6e68a61d0c ar71xx: use netgear prefix for WNR2200 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:52 +00:00
Gabor Juhos 4f4283a964 ar71xx: use netgear prefix for WNR2000 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:51 +00:00
Gabor Juhos 0dbe07edab ar71xx: use netgear prefix for WNDR3700 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:50 +00:00
Gabor Juhos 79860a09b1 ar71xx: add an uci-defaults script for LED configuration migration
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 15:55:49 +00:00
Gabor Juhos 1ab3cb3ceb ar71xx: let HW switch control WAN LED on dir-825-c1
Enable GPIO 20. This hands off control of the blue planet led to the
integrated switch. Consequently, remove the led configuration for the
blue planet led.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4080/
[juhosg: whitespace fixup]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 14:56:24 +00:00
Gabor Juhos 4ee87179db ar71xx: image: override mkcameofw status
This allows to build images for other boards, even if
the image is too big for Cameo devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 14:56:22 +00:00
Gabor Juhos 581e4d98e6 ar71xx: fix LAN LEDs for dir-825-c1
This patches fixes the lan led configuration. The new configuration is
identical to the one in mach-db120.c and it works. The previous one
didn't work at all.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-21 12:04:45 +00:00
Gabor Juhos 944577c63f ar71xx: set proper wan mac during initial configuration on dir-825-c1
The goal is to set the WAN MAC address to the one on the
sticker on the bottom of the unit. Currently it is not
used at all. But some users expect the WAN interface to
have the MAC address that is written on the sticker.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:59:44 +00:00
Gabor Juhos 784e34f43a ar71xx: tew-712br: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:36 +00:00
Gabor Juhos 9738028ba7 ar71xx: tew-673gru: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:34 +00:00
Gabor Juhos 6ff15e23d5 ar71xx: dir-825-c1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:33 +00:00
Gabor Juhos 0097945adf ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:32 +00:00
Gabor Juhos 40776d159d ar71xx: dir-505-a1: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:31 +00:00
Gabor Juhos cba7f6c262 ar71xx: rename ath79_parse_mac_addr to ath79_parse_ascii_mac
Rename the function and extend it in order to make it
usable from board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:30 +00:00
Gabor Juhos 344f649055 ar71xx: fix Cameo934x initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-20 16:41:28 +00:00
Gabor Juhos a57602ebeb ar71xx: add profile and build image for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 22:36:43 +00:00
Gabor Juhos 9ceddfbb63 ar71xx: add sysupgrade support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 22:36:42 +00:00
Gabor Juhos b8a054aff2 ar71xx: add user-space support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 22:36:41 +00:00
Gabor Juhos 469653f820 ar71xx: add kernel support for the WD My Net N600 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 22:36:39 +00:00
Gabor Juhos 94f3076a60 ar71xx: wndr4300: enable HW ECC mode for the NAND controller
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 18:43:43 +00:00
Gabor Juhos 2c046acf63 ar71xx: add ath79_nfc_set_ecc_mode helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 18:43:42 +00:00
Gabor Juhos 01b9f2ed81 ar71xx: ar934x_nfc: add experimental support for hardware ECC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 18:43:41 +00:00
Gabor Juhos 71d579ba28 ar71xx: ar934x_nfc: return error code from some low-level functions
Change some flow-level unctions to return with an
error code in order to be able to report errors
to the core code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 18:43:40 +00:00
Gabor Juhos ba2221869e ar71xx: ar934x_nfc: use devm_* functions
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 18:43:38 +00:00
Gabor Juhos a6a0cb38f2 ar71xx: add profile and build image for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 17:52:45 +00:00
Gabor Juhos ba8664976d ar71xx: add user-space support for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 17:52:42 +00:00
Gabor Juhos c589592564 ar71xx: add kernel support for TP-Link TL-MR13U
This patch adds support for TP-Link TL-MR13U router with built-in 10AH
rechargeable battery.

The patch is based on kamwanlai's patch:
https://forum.openwrt.org/viewtopic.php?pid=206746#p206746

Updated to accommodate recent changes introduced with:
ar71xx: remove fs_* variables from image/Makefile

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
[juhosg:
  - refresh and rename rename 930-add-tl-mr13u-support.patch =>
    625-MIPS-ath79-add-tl-mr13u-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 17:52:41 +00:00
Gabor Juhos ff74560460 ar71xx: wnr2200: fix a typo in a LED name
Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 17:52:40 +00:00
Gabor Juhos b1560fb9e3 ar71xx: add profile and build image for the WNR2200 board
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 16:56:51 +00:00
Gabor Juhos 8613f5da46 ar71xx: add user-space support for the WNR2200 board
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 16:56:50 +00:00
Gabor Juhos f7b84c9209 ar71xx: add kernel support for Netgear WNR2200 wireless router
This patch adds OpenWRT support for the Netgear WNR2200 (N300)
wireless router with USB.

Technical details of this router can be found at
http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx
and http://wikidevi.com/wiki/Netgear_WNR2200

Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
[juhosg:
  - add commit message and SoB line from the original patch
  - remove dead code from mach-wnr2200.c
  - refresh 624-MIPS-ath79-WNR2200-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 16:56:48 +00:00
Gabor Juhos bfe5dcd235 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 17:03:29 +00:00
Gabor Juhos 2d7844c116 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 16:00:41 +00:00
Gabor Juhos 10efed4c0b ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 17:29:16 +00:00
Gabor Juhos 01122df653 ar71xx: add support for TL-MR3040 v2
This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 15:28:50 +00:00
Gabor Juhos 02240292d3 ar71xx: add wireless bgn led support for dir-825-c1
I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 15:01:40 +00:00
Gabor Juhos ee2f2c1138 ar71xx: use the lzma loader for the WRT160NL
Partition layout before:
  0x000000040000-0x0000001a0000 : "kernel"
  0x0000001a0000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000
  0x000000350000-0x0000007e0000 : "rootfs_data"

after:
  0x000000040000-0x000000140000 : "kernel"
  0x000000140000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000
  0x0000002f0000-0x0000007e0000 : "rootfs_data"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07 11:40:45 +00:00
Gabor Juhos 5cc7349180 ar71xx: fix NetGear initramfs image names
The '-initramfs' string is duplicated in the image names,
fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03 07:22:27 +00:00
Gabor Juhos 0977e4452f kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:12:54 +00:00
Gabor Juhos 6b48f9c617 ar71xx: image: reorder Image/Build/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:05:58 +00:00
Gabor Juhos 5e79a65f22 ar71xx: image: simplify more oneliner macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:05:57 +00:00
Gabor Juhos 13806122f6 ar71xx: image: simplify oneliner loader macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:05:56 +00:00
Gabor Juhos 129b5090a3 ar71xx: image: simplify oneliner initramfs macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:05:55 +00:00
Gabor Juhos 727337be1e ar71xx: image: simplify oneliner buildkernel macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:05:54 +00:00
Gabor Juhos c097480460 ar71xx: optimize kernel generation
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.

Move compressed kernel generation into a separate
phase to avoid that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 18:03:39 +00:00
Gabor Juhos 0927dd581f ar71xx: image: dynamically generate Image/Build/Template/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 16:10:44 +00:00
Gabor Juhos 78700f5495 ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.

This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.

Signed-off-by: Dmytro <dioptimizer@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 16:09:12 +00:00
Gabor Juhos a569b25aa5 ar71xx: remove fs_* variables from image/Makefile
Those are not needed since we are generating the
initramfs images along with the others.

Remove the variables and use the template names
directly.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 09:24:59 +00:00
Gabor Juhos d55205b171 ar71xx: fix initramfs image generation for Cameo933x profiles
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.

Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 07:42:03 +00:00
Gabor Juhos dc7d578939 ar71xx: add some pending patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27 18:06:49 +00:00
Gabor Juhos 76c34d5180 ar71xx: don't hardwire cpu_has_dsp{,2} to zero
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27 10:48:25 +00:00
Gabor Juhos 5cdb5dbf49 ar71xx: don't register USB device on WNDAP360
Apparently registering usb device on newest trunk causes
this AP not to boot...
Since there is no USB socket in that device anyway this
can be simply removed (and device boots then no problem).

[juhosg:
  - tweak subject line and description,
  - remove #include "dev-usb.h",
  - remove 'select ATH79_DEV_USB' from Kconfig]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27 10:48:24 +00:00
Gabor Juhos d0ca859a7d ar71xx: build factory image for DIR-505 A1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24 10:11:53 +00:00
Gabor Juhos 94bcd1b9a3 ar71xx: allow to override kernel size in the CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24 10:11:45 +00:00
Gabor Juhos 1b2ea64f5a kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23 17:31:04 +00:00
Luka Perkov 9a00f59362 ar71xx: add support for hornet-ub-x2
The hornet-ub-x2 is hornet-ub variant with double more flash and ram.

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15 00:57:47 +00:00
John Crispin e444905c1e ar71xx: fix TL-WR710N board detection
Fix for recognize TL-WR710N

http://patchwork.openwrt.org/patch/3946/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37782 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 18:15:58 +00:00
John Crispin 800114714b ar71xx: Fix factory image for DIR 505 A1
Based on the original firmware, the file must have the tag
HORNET-PACKET-DIR505A1-3, not HORNET-RT-DIR505A1-3.

http://patchwork.openwrt.org/patch/3945/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 18:15:49 +00:00
Felix Fietkau 6d651b4e3d ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-13 10:35:10 +00:00
Felix Fietkau 413a09f44c ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint
256 entries is a bit excessive, even for gigabit speeds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 17:26:03 +00:00
Felix Fietkau 7fff30d5b9 ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion
Improves ethernet performance, especially during bridging

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 17:26:00 +00:00
Felix Fietkau 45e13d91a6 ar71xx: fix typo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 12:41:53 +00:00
Felix Fietkau ee79267e1c ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37758 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 11:44:35 +00:00
Felix Fietkau 7f6198dd85 ar71xx: ethernet: do not update the unused dev->last_rx field
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37757 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 11:44:31 +00:00
Felix Fietkau 8c1ae8044b ar71xx: add missing return statement in ethernet mtu change op
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 11:44:28 +00:00
Felix Fietkau 855c45a8b9 ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-10 15:31:38 +00:00
John Crispin 8c6b586f4d ar71xx: remove duplicate dir505 entry from board detection code
https://dev.openwrt.org/ticket/14006

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06 14:12:02 +00:00
John Crispin 7e25c1660c ar71xx: add usb modules to dir 505 profile
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 11:08:30 +00:00
John Crispin bfaf62a45f ar71xx: add support for dir 505 a1
this patch is based on ...

-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 10:41:48 +00:00
Gabor Juhos 0452570f3f ar71xx: fix tl-wa901nd buttons code
This patch fixes the code of the buttons for TP-Link WA901ND.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 09:09:39 +00:00
Gabor Juhos 7438a0ec3e ar71xx: ubnt unifi outdoor register gpio button
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 09:09:37 +00:00
Felix Fietkau 0e272106bc kernel: update to linux 3.10.4, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-29 22:42:22 +00:00
Felix Fietkau 01695667a8 build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-29 09:38:29 +00:00
Gabor Juhos 5085fd1dd0 ar71xx: add profile and build image for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:38 +00:00
Gabor Juhos 2278ab5a41 ar71xx: add user-space support for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:37 +00:00
Gabor Juhos 9e5044e002 ar71xx: add kernel support for the Netgear WNR612 v2 board
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:36 +00:00
Gabor Juhos c12878829b ar71xx: add profile and build image for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:34 +00:00
Gabor Juhos 5427d96c3a ar71xx: add user-space support for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:33 +00:00
Gabor Juhos 1cc1f45a4b ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:32 +00:00
Gabor Juhos ddee72b34d ar71xx: build image for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:31 +00:00
Gabor Juhos 72afc1045b ar71xx: add model detection for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:29 +00:00
Gabor Juhos ee37ad6b0d ar71xx: TEW632BRP has buttons 'active low', fix board config
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-28 10:23:22 +00:00
Gabor Juhos 455c0fd191 ar71xx: add profile and fixup image generation for the TL-MR10U board
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.

Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26 07:32:01 +00:00
Gabor Juhos 07280acae5 ar71xx: add user-space support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26 07:31:59 +00:00
Gabor Juhos 0bbbb150c0 ar71xx: add kernel support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26 07:31:57 +00:00
Gabor Juhos 0a80570a9c kernel: update 3.10 to 3.10.3
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26 07:19:58 +00:00
Gabor Juhos f1d73046b4 ar71xx: fix switch port map for the Archer C7
The correct port number for the WAN port is 1.
Update the VLAN port maps to reflect that.

https://forum.openwrt.org/viewtopic.php?pid=203755#p203755

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 16:02:13 +00:00
Gabor Juhos 2c55674246 kernel: update 3.10 to 3.10.2
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 15:31:13 +00:00
Gabor Juhos c38dd0ac48 Revert "ar71xx: override cpu_has_mmips feature"
This reverts r37477. A generic patch is used to fix
this globally, so revert the ar71xx specific change.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 10:14:08 +00:00
Gabor Juhos af3b864b3e ar71xx: override cpu_has_mmips feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 09:40:32 +00:00
Gabor Juhos b595892f73 ar71xx: use mtd_get_part_size helper
Drop the local get_mtd_part_size implementation and use
the equivalent function provided by lib/functions.sh.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 09:26:57 +00:00
Gabor Juhos 30abb77cdd ar71xx: build image for the TP-LINK TL-WR941N v6 board
TL-WR941N v6 use almost same IC as WDR3500.

[juhosg: change subject, and change fw layout from 4M to 4Mlzma]

Patchwork: http://patchwork.openwrt.org/patch/3719/
Signed-off-by: ShuYu Wang <andelf@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 08:54:45 +00:00
Jonas Gorski 184460f01e kernel: move CONFIG_NET_IP_TUNNEL to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-19 22:58:01 +00:00
Felix Fietkau c40e3c0d0e ar71xx: fix uimage split for ew-dorin
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 16:59:58 +00:00
Felix Fietkau e275127084 ar71xx: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 15:12:41 +00:00
Luka Perkov f361a4c91f ar71xx: remove patches for 3.8 (leftover after r37315)
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 22:57:47 +00:00
John Crispin 7c87681a6f ar71xx: fix maximum watchdog timeout
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:09 +00:00
Felix Fietkau 6bcbd536ed ar71xx: update to 3.10.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 17:29:56 +00:00
Felix Fietkau c1bd015d31 ar71xx: use uimage split for WHR-HP-G300N
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:06:01 +00:00
Felix Fietkau 56386d5666 ar71xx: use uimage split for dlrtdev
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:57 +00:00
Felix Fietkau 191e61e4f7 ar71xx: use uimage split for Allnet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:53 +00:00
Felix Fietkau b41b7c54af ar71xx: use uimage split for Cameo devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:50 +00:00
Felix Fietkau cb2f4a3084 ar71xx: use uimage split for DIR-825B1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:46 +00:00
Felix Fietkau 50e69a1452 ar71xx: use uimage split for Embedded Wireless Dorin
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:42 +00:00
Felix Fietkau 3b000a1480 ar71xx: use uimage split for Ubiquiti XM devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:39 +00:00
Felix Fietkau e53672309b ar71xx: increase kernel size for wndr3700 based devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:35 +00:00
Felix Fietkau 246ecf6b9d ar71xx: use uimage split for WZR-HP-G300NH2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:31 +00:00
Felix Fietkau 4fe58418fb ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:27 +00:00
Felix Fietkau 482ed090de ar71xx: use uimage split for WZR-HP-G300NH
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:23 +00:00
Felix Fietkau f551bccbe6 ar71xx: use uimage split for WZR-HP-G450H
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:19 +00:00
Felix Fietkau ec6d65280b ar71xx: enable uimage split and use it for carambola2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:16 +00:00
Felix Fietkau 6079393d55 ar71xx: remove linux 3.8
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:12 +00:00
Felix Fietkau aad55d92d6 ar71xx: move the watchdog driver to the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:08 +00:00
Felix Fietkau 215f8e9d8e ar71xx: set linux 3.10 as default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:04 +00:00
Felix Fietkau f78f7471c9 ar71xx: fix ar933x watchdog clock (#13866)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:29:53 +00:00
John Crispin 0f44966ec8 ar71xx: add carambola2 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:53 +00:00
John Crispin 584f6dfd7c ar71xx: set priority of ath79_wdt to 1
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:01:08 +00:00
Florian Fainelli 557954455b ar71xx: fix TPLINK/TPLINKOLD initramfs images typos
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 21:28:34 +00:00
Florian Fainelli c7ae72df76 ar71xx: fix Netgear initramfs images
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 17:18:03 +00:00
Florian Fainelli 7c91723762 ar71xx: fix some more issues with initramfs images
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 15:22:47 +00:00
Felix Fietkau a429db0821 ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 11:33:43 +00:00
Felix Fietkau f42a1b166f ar71xx: add linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-09 12:52:18 +00:00
Gabor Juhos a40f5f2d24 ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:21 +00:00
Gabor Juhos 90421e83a5 ar71xx: fix partition layout on Netgear WNDAP360
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:20 +00:00
Gabor Juhos 137eb45ff4 ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 08:40:18 +00:00
Luka Perkov 11c005ccfc ar71xx: merge patches [611-*,621-*] into 610-*
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 23:31:39 +00:00
Luka Perkov ce1df66cd6 ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 13:45:29 +00:00
Luka Perkov e8c98290c8 ar71xx: $(KDIR_TMP) must be present before starting initramfs build
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-04 12:48:52 +00:00
Luka Perkov e29dea1e32 ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type
switch buttons should be declared as switch so the failsafe shell is not
triggered by accident in procd

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 10:45:32 +00:00
Florian Fainelli 732b42089a ar71xx: only invoke Initramfs building when enabled
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-02 10:43:31 +00:00
Florian Fainelli ffccd6fa5f ar71xx: fix initramfs images generation after r37049
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-01 15:37:25 +00:00
Florian Fainelli 704e2ed39d targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 19:58:31 +00:00
John Crispin 623e6025a8 base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:47 +00:00
John Crispin 02f1075b0a base-files: diag does not need to insmod any drivers, procd already did it for us
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:43 +00:00
John Crispin ce0ccca1f7 ar71xx: drop procd_init console hack
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:11 +00:00
Felix Fietkau b3019e49e1 ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-07 13:42:50 +00:00
Gabor Juhos 11706ba13e ar71xx: add support for WIFI button on tp-link tl-mr3220v2
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-04 13:25:54 +00:00
Gabor Juhos c94434f29f ar71xx: register USB port for RB2011U* devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:31 +00:00
Gabor Juhos 86e0f5976e ar71xx: create a separated network interface for the RB2011UAS SFP port
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:30 +00:00
Gabor Juhos 97254ab640 ar71xx: make the SFP port usable on RB2011*S boards
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:28 +00:00
Gabor Juhos 133498bac5 ar71xx: rb2011: add switch led control values
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:21 +00:00
Gabor Juhos 83c3f0f918 ar71xx: rb2011: update RGMII RX/TX delay values
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:20 +00:00
Gabor Juhos 7d955c422b ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:17 +00:00
Gabor Juhos c647fa6c82 ar71xx: add user-space support for RB2011UAS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:15 +00:00
Gabor Juhos 9badcc468f ar71xx: add kernel support for the RB2011UAS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 17:38:13 +00:00
Gabor Juhos 4b28aa5b5c ar71xx: add profile and build image for the Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:10 +00:00
Gabor Juhos a7f2edfe43 ar71xx: add user-space support for TP-LINK Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:09 +00:00
Gabor Juhos 2635f67744 ar71xx: add kernel support for the TP-LINK Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:07 +00:00
Gabor Juhos 581e0e117e ar71xx: add USB workarounds for AR934x/QCA955x SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:23:06 +00:00
Gabor Juhos b35eea4aea ar71xx: add profile and build image for the DIR-601-B1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:30 +00:00
Gabor Juhos 9a188388ce ar71xx: allow to build CameoHornet images for multiple regions
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:29 +00:00
Gabor Juhos 6a19ebe025 ar71xx: allow to override fw version in CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:19:28 +00:00
Gabor Juhos 4fb9476dd3 ar71xx: typo in detect TL-MR10U/TL-MR11U
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:38:00 +00:00
Gabor Juhos bdaf03d8e7 ar71xx: fix TL-MR10U usb power
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:37:59 +00:00
Gabor Juhos 590f53b235 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:31 +00:00
Gabor Juhos ce44afced5 ar71xx: set eth0 mac address to match bottom label of the OM2P LC
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:29 +00:00
Gabor Juhos 852ce23bd3 ar71xx: add TP-LINK TL-MR10U
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26 16:02:26 +00:00
Felix Fietkau ef94887803 ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-21 09:45:46 +00:00