276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
5bc0fb0253
[ar71xx] Remove trailing spaces, convert spaces to tabs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 19:30:50 +00:00
18cf23720e
[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02 20:19:55 +00:00
ab2b65fe3d
ar71xx: Configure WNDR3700 switch LED colors properly ( #8103 )
...
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:55:16 +00:00
22d4293bce
ar71xx: don't use vlan 0 for devices with rtl8366s switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 19:15:32 +00:00
5bfe0c97ff
ar71xx: update default network configuration file for the WNDR3700
...
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:38:31 +00:00
a8e1784a70
rtl8366_smi: move RTL8366S driver into a separate file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:38:07 +00:00
425f18e7db
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
...
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 09:01:47 +00:00
27d58c3312
ar71xx: add default network configuration file for the WNDR3700
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-27 21:21:24 +00:00
Steven Barth
Vasilis Tsiligiannis
Jo-Philipp Wich
Felix Fietkau
Gabor Juhos