Commit Graph

25 Commits (97c3a186fbbb6fc9a26d61629991df77052dcab2)

Author SHA1 Message Date
Hauke Mehrtens d88816540f broadcom-diag: remove devices already supported by the kernel
This driver will soon be removed completely and the scripts are already
using the new API.

This also removes bcm57xx_init() which restarts the switch and is now
done by b53.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:57:16 +00:00
Hauke Mehrtens 0d0ce9938c brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:54:38 +00:00
Hauke Mehrtens 1a205f982c broadcom-diag: add Belkin F7D3302/F7D7302
Signed-off-by: Cody P Schafer <devel@codyps.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11 23:04:23 +00:00
Hauke Mehrtens d873659882 broadcom-diag: fix sys button on Asus rt-n16
This closes: #14427.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09 20:09:21 +00:00
Hauke Mehrtens cf3d8e679c brcm47xx: add detection for Linksys WRT54GS V1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09 20:08:09 +00:00
Hauke Mehrtens a66951ab99 broadcom-diag: fix 'autoload' number of diag.ko
Change the autoload number from '5' to '05' so the module loads earlier (as intended).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02 23:14:08 +00:00
Hauke Mehrtens 3d8f232fda brcm47xx: update board detection patches
This is now the version which was send for mainline Linux kernel 
inclusion. The data needed to detection a board is now stored in init 
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 14:33:54 +00:00
Hauke Mehrtens ff60f97820 broadcom-diag: add GPIO configuration for Linksys E2000 V1
Thank you Javier Achirica for the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:52:23 +00:00
Hauke Mehrtens c042929971 broadcom-diag: Add WRT310N v1 gpio leds and buttons
Signed-off-by: Flavio Silveira <fggs@terra.com.br>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:50:14 +00:00
Hauke Mehrtens 9aa1ed8c46 brcm47xx: add detection code for Huawei E970
This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 17:00:45 +00:00
Hauke Mehrtens 9d20ead66b brcm47xx: board detection, GPIO for Linksys E1000 V2.1
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 19:24:08 +00:00
Hauke Mehrtens 4bb1ea5172 brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Most of the Linksys devices without an own GPIO configuration where 
detected as WRT54G. On one board this made OpenWrt to boot into 
failsafe every time, because one GPIO configurated as button was not a 
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 16:00:52 +00:00
Hauke Mehrtens 8df0f45067 broadcom-diag: remove BUFFALO_UNKNOWN
This was itriggered by to many non buffalo devices

This closes #14043.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17 13:43:07 +00:00
Hauke Mehrtens be7d168013 brcm47xx: change board detection for some Asus devices
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04 12:36:13 +00:00
Hauke Mehrtens fd034dbcee broadcom-diag: show error message in case something goes wrong with gpio irq
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:12:07 +00:00
Hauke Mehrtens a049974896 broadcom-diag: add gpio config for Asus RT-N66U
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:10:37 +00:00
Hauke Mehrtens 8ddfb80294 broadcom-diag: add gpio config for Linksys E4200v1
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:09:39 +00:00
Hauke Mehrtens d4ed385bc3 broadcom-diag: add support for the ASUS RT-N12
This adds button and led info, which I determined
by manually poking the gpio values.

Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 15:44:04 +00:00
Hauke Mehrtens a20e8232fb broadcom-diag: increase version number
There are some changes in there and this should be rebuild.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 15:06:14 +00:00
Hauke Mehrtens 24880dbaa0 brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 19:33:59 +00:00
Hauke Mehrtens 5b1af986f6 brcm47xx: do not load the kernel modules needed for Ethernet manually
add the boot flag to make the kernel modules needed for Ethernet and 
diag load on startup.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
Hauke Mehrtens cd7c8bbe3d broadcom-diag: make it work with kernel 3.10
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:30:31 +00:00
Hauke Mehrtens 8ad163f6f5 broadcom-diag: check the correct value for not null.
This also fixes a compile warning.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:28:37 +00:00
Hauke Mehrtens 6d0a2d148e broadcom-diag: reoder some parts.
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:26:35 +00:00
John Crispin f1b4824c86 packages: clean up the package folder
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:37 +00:00