942ee241a8
mac80211: add uci support for configuring antenna gain
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:22 +00:00
6eb0e37631
iw: update to 3.6 and add support for configuring antenna gain
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:16 +00:00
36349413b7
mac80211: fix antenna gain and add support for user-defined antenna gain configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:09 +00:00
198408b924
mac80211: rework the current tx power display patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:29:02 +00:00
6d37c9e99a
mac80211: fix beacon IE power constraint handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:28:54 +00:00
0a0e654963
build: turn on package parallel builds by default and fix descriptions.
...
By default, this is only used when building with make -j.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 18:09:41 +00:00
dad87f7f50
Add FIQ support for cns3xxx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:35:35 +00:00
55b1f50e03
Update board support for Gateworks Laguna Product family
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:34:18 +00:00
c0a60594a8
USB iso mode fixes
...
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:31:22 +00:00
a583b6129e
cmake: update to version 2.8.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 00:07:28 +00:00
f2c23625e1
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:42 +00:00
0af4307860
generic: enable CONFIG_USB_EHCI_TT_NEWSCHED
...
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.
See: http://www.spinics.net/lists/linux-usb/msg31993.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:39 +00:00
98d77709be
[package] 6to4: properly setup Base6to4Interface ( #12251 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 18:30:07 +00:00
3c2b27da2f
ath5k: add a spur mitigation fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 11:12:13 +00:00
b4ae759bbb
ramips: add memory detection code for RT5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:15 +00:00
ae436c404b
ramips: allow to use custom code for memory size detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:14 +00:00
0d211243f7
[uml] include sys/resource.h in arch/um/os-Linux/start_up.c ( #12155 )
...
Required for recent (e)glibc systems
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 09:21:01 +00:00
335b61f11a
[cns3xxx]: fix ncores for single-core systems.
...
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:07:17 +00:00
eec34ef032
[cns3xxx]: add i2c retries
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:06:13 +00:00
4f0ecc3ff5
[cns3xxx]: fix pcie abort handling
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:05:19 +00:00
77deb37604
[brcm63xx] remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 20:11:37 +00:00
0fe0b149fa
generic: add upstream commit id to codel patches and refresh those
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 14:17:17 +00:00
e2356de36b
[kernel] backport the upstream entropy changes ( #11951 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:54:01 +00:00
fa31c1ff06
[targets] get rid of the IRQF_SAMPLE_RANDOM flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:53:58 +00:00
dcae68fe91
[package] mac80211: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:53:54 +00:00
1b0eab1729
[mcs814x] add wmbus-repeater to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:56:50 +00:00
1cd6db74ac
[mcs814x] enable multicast and advanced ip routers configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:53:34 +00:00
c0a7d5c938
[mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:50:20 +00:00
7e02f20eb0
mac80211: avoid sending useless delBA frames on client disassoc
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 16:20:30 +00:00
c85bbac847
ath9k: fix rx filtering for older chipsets, helps with multi-bssid and mesh mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 16:17:18 +00:00
4bae4b20b2
[ramips] make uci-defaults switch detection work on rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:18 +00:00
d27303e486
[ramips] add ethernet support for rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:08 +00:00
f00a987a69
[ramips] make ramips ethernet use a register mapping table
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:46:58 +00:00
55fc9a401d
[brcm47xx]: activate failsafe on all ports of the switch and not just port 0.
...
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:04:59 +00:00
cd7d6a23f7
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:41 +00:00
40e58ce1c3
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:40 +00:00
020a46d895
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:38 +00:00
685cfcf229
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:49:43 +00:00
cdfbfeaa7a
[ramips] unbreak port mapping detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 09:51:48 +00:00
2fce460e3b
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
5630868dee
[include] version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:26:48 +00:00
ebc0505172
base-files: remove obsolete entries from sysctl.conf ( #12236 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 15:24:01 +00:00
8eadb90934
openssl: use asm SHA1, SHA256, AES on MIPS.
...
On a lightly loaded 24Kc, as measured by 'openssl speed sha1', shows between
27% and 120% speedup depending on block size.
SHA1 is notably used in Transmission for piece verification.
Patch by Catalin Patulea
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 15:23:57 +00:00
7baa5e6859
[packages] mac80211: extend help for new options in b43-fwsquash.py
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 18:48:27 +00:00
55ee704c5f
[packages] mac80211: fiy typo in b43-fwsquash.py
...
Thanks Jonas
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 18:47:45 +00:00
96007e8af1
hostapd: move the + to the correct line
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 12:36:32 +00:00
57bd9abecc
grub2: use the static lzma lib instead of the dynamic one
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 10:38:06 +00:00
4fe0549e77
x86: avoid using grub prepare when using grub2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 09:59:56 +00:00
ce44bef353
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 09:50:01 +00:00
c09ce574b4
grub2: disable nls to fix build failure when libintl/host is built
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 09:49:56 +00:00
Felix Fietkau
Imre Kaloz
Gabor Juhos
Jo-Philipp Wich
Florian Fainelli
John Crispin
Hauke Mehrtens