18b0769704
base-files: fix network_get_prefix6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-22 16:47:16 +00:00
fa2240a9bb
base-files: network.sh: fix typo in previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21 19:02:38 +00:00
4f988432cb
base-files: network.sh: simplify network_get_prefix6()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-21 18:54:58 +00:00
b04bf87a8d
base-files: add support for ipv6-prefixes in connection with netifd
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15 13:07:51 +00:00
4f4f7ca182
merge /lib/functions/boot.sh and /lib/functions.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:53 +00:00
fd18877418
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:46 +00:00
2e6a28720c
base-files: use json_is_a() in network.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-17 13:07:42 +00:00
8b39aa4636
base-files: rework cache handling in network.sh to keep the entire parsed ifstatus, use jshn namespaces to support using it concurrently with other jshn users
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 20:17:18 +00:00
b1c39b2c14
base-files: various enhancements to network.sh
...
- support reading inactive gateways and DNS information in
network_get_gateway(), network_get_dnsserver() and network_get_dnssearch()
by passing "true" as optional last argument
- internally cache fetched values to speed up subsequent accesses to the same
data, introduce network_flush_cache() to clear them
- add some inline function documentation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16 18:22:02 +00:00
6f223b33c2
[package] base-files: remove route enabled check in lib/functions/network.sh after netifd bump
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 08:47:10 +00:00
26b0b0cea8
base-files: uci-defaults for rssileds
...
Adds capability to add uci-defaults defining RSSI LEDs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 14:01:37 +00:00
477607f2e1
[package] base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 19:04:11 +00:00
1d62b57940
[package] base-files: only consider enabled default routes when finding the wan iface ( #11774 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 11:58:35 +00:00
5ee560d56c
[package] base-files: implement network_get_gateway(), network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-17 11:50:50 +00:00
ec1352fc73
[package] base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-07 14:55:26 +00:00
932f2f9811
base-files: add LED specific functions to /lib/functions/uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:16 +00:00
bff890af67
[package] base-files: add network_is_up()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 02:03:25 +00:00
55770be655
[package] base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 00:20:16 +00:00
c092e2336f
[package] base-files: add network_get_device() to network.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 03:24:56 +00:00
1ee066a435
[package] base-files: introduce /lib/functions/network.sh
...
This file will contain common procedures to deal with network interfaces.
Initially provides network_get_ipaddr(), network_get_ipaddr6(),
network_get_subnet() and network_get_subnet6() to determine the
primary IP addresses or subnets of a given logical interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 03:15:02 +00:00
b64a2fe1e9
base-files: split service related functions off to /lib/functions/service.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-20 14:29:50 +00:00
5511d4ff1a
base-files: remove trailing whitespaces from lib/functions/boot.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-02 11:17:30 +00:00
804fa29988
base-files: add lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:46 +00:00
d5e202e289
base-files: add initial support for mounting overlayfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-17 19:09:39 +00:00
712d16b7c5
boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 22:40:47 +00:00
7897ae04f7
base-files: Add "-o noatime" to mount wrapper
...
noatime is cheaper than default relatime.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 22:39:08 +00:00
48cc34bfa7
[PATCH] Fix permissions for /etc and other dirs after clean flash ( #6039 )
...
During the first OpenWrt boot after a clean flash (when the jffs2
partition is not yet initialized) tmpfs is used instead of the usual
jffs2 overlay filesystem. If this tmpfs is mounted with default
options, all directories created there (/etc, /etc/config, other
subdirectories in /etc) get permissions 1777 by default, and these
permissions then persist in the created jffs2 at least until
subsequent sysupgrade. Mounting tmpfs with mode=0755 fixes the
permission problem.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-07 00:26:00 +00:00
ce5a30ba10
[package] base/block-extroot, base/block-mount: Modified preinit and block-extroot and
...
block-mount so that use of block-mount and block-extroot do not require that block-extroot,
block-mount, nor the kernel modules they depend, on are required to included in the image.
That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of
a squashfs system and it will work.
In addition packages which are installed into the jffs2 of a squashfs system may now affect
preinit, so long as they do not require execution of commands that occur before the merging of
the jffs2 and built-in (squashfs) preinit scripts is done.
Thanks jow for the preinit merge stuff!
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-23 13:58:05 +00:00
6a745d7e2a
[package] base-files: Add function pi_include the /lib/functions/boot.sh used by preinit, which safely sources files as well as working correctly whether the script using it is a package added to the jffs2 part of a squashfs or built into an image or on some other root filesystem.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-19 23:29:40 +00:00
f82715bdd9
[package] base-files: fix a preinit hang in jffs2_ready() when no rootfs_data partition is found ( #7362 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-20 05:57:54 +00:00
6e84b166c4
change from /jffs to /overlay, patch from Daniel Dickinson
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-21 17:16:50 +00:00
26f2c148fa
[package] base-files: force preinit to use busybox mount ( #6797 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-13 02:59:05 +00:00
ddf22a9a51
add block-extroot, a package for using an external filesystem as rootfs (patch by cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26 22:46:10 +00:00
fd4ddfd240
add preinit modularization work by Daniel Dickinson (cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
Steven Barth
Jo-Philipp Wich
Mirko Vogt
Gabor Juhos
Felix Fietkau
Michael Büsch
Daniel Dickinson
Florian Fainelli