83c1bc5ae2
update to 2.6.27.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-25 13:54:46 +00:00
7c277aa5f1
move THERMAL symbols into the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-25 13:52:25 +00:00
85706b181c
brcm63xx has pcmcia support and is able to run b43 on its pci bus
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 23:08:20 +00:00
d1671ca71c
Update brcm63xx broadcom profile now that b43 is available
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 23:01:48 +00:00
6292732c53
Synchroniz bcm63xx kernel configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 22:16:48 +00:00
6684678a0b
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 21:26:11 +00:00
234a100d23
Generate valid images for the bcm96348gw board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 21:22:45 +00:00
c14bc0fadb
move some options to the generic 2.6.27 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 17:28:12 +00:00
60085a01bb
update to 2.6.27.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 17:22:30 +00:00
1064d5a460
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:30:22 +00:00
67df4eb0ff
Package bcm63xx-pcmcia kernel module and fix compilation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:26:23 +00:00
2fc763d248
Remove old kernel configuration files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:23:29 +00:00
691021f3bb
Delete old brcm63xx files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:21:42 +00:00
244eec7994
[kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches
...
* based on a patch by Hauke Mehrtens
* closes #4193
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-12 17:49:01 +00:00
ccadbe1385
add missing kconfig symbols for 2.6.27 targets when all modules are enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-11 02:43:35 +00:00
735b2ea438
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-06 12:52:39 +00:00
427cd658d9
Add basic support for Inventel Liveboxes, resync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-03 20:30:43 +00:00
c0645236a7
Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-03 18:52:58 +00:00
baf91b69ce
Use 2.6.27.4 kernel version
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28 11:19:24 +00:00
368c1b33f9
Update targets to 2.6.27.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-23 09:11:10 +00:00
126afe4e9a
Update patches and rename board 9 stands for development board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-22 09:20:51 +00:00
5274d927c6
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-20 12:55:28 +00:00
b89d17b829
New Broadcom BCM63xx codebase, huge thanks to Maxime ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-17 22:53:56 +00:00
5d98b2d80d
Fix reference to the old and replaced kmod-rt61
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-27 10:47:00 +00:00
d5da0a6f1c
[kernel] update to 2.6.26.5 and 2.6.25.17
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-26 18:46:53 +00:00
529fa28dd0
disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-24 19:28:53 +00:00
80b1408ef9
[kernel] update to 2.6.26.3 and 2.6.25.16
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-22 15:37:19 +00:00
18e38f7ba7
[kernel] update to 2.6.25.15 and 2.6.26.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-07 16:52:52 +00:00
6d2ba97481
[kernel] update to 2.6.25.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26 10:53:23 +00:00
27dcc5a45b
update targets to 2.6.25.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-05 16:52:15 +00:00
baa12995a7
upgrade to 2.6.25.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-26 14:28:16 +00:00
478b3b32f4
[kernel] upgrade to 2.6.25.7, and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-17 12:57:04 +00:00
db81fa946e
upgrade to 2.6.25.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11 11:38:39 +00:00
7003112551
Add bcm3350 cpuid
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-05 16:19:46 +00:00
e0d9e7655c
[brcm63xx] revert kernel version to 2.6.25.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-27 06:27:16 +00:00
3f4ffa1f40
[brcm63xx] refresh kernel patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-19 08:33:22 +00:00
6e01507c1f
[kernel] upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11184 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:12:54 +00:00
9981bad376
bcm96345: correct some 6345 specific stuff
...
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:32:16 +00:00
c2d384520b
bcm963xx: fix cfe detection
...
The CFE detection failed to account for zero termination.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:32:05 +00:00
27ff1d7e6c
bcm963xx: add new timer code
...
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:55 +00:00
b880126e1d
bcm963xx: remove obsolete timer code
...
This removes some code that has been deprecated in kernels >= 2.6.24.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:45 +00:00
6de2c4ab35
bcm963xx: fix uart isr
...
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:35 +00:00
05f2649f3a
bcm963xx: rewrite irq handling code
...
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:25 +00:00
c1e80b87ee
bcm963xx: add missing trailing zero to load address
...
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:11 +00:00
711aa886ec
bcm963xx: flashmap support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:31:02 +00:00
fed20d18b3
bcm963xx: serial port support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:49 +00:00
51d0248390
bcm963xx: board support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:39 +00:00
4db8e5354d
bcm963xx: add 2.6.25 configuration file
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:30 +00:00
a64306aa69
bcm963xx: use the 2.6.25.1 kernel
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:16 +00:00
55b97a49ed
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:30:04 +00:00
72192c48c5
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:29:39 +00:00
60ef52b3f1
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-09 17:08:51 +00:00
f0c04a90e6
upgrade to 2.6.24.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 10:23:36 +00:00
f9967ea05f
properly disable CONFIG_CRYPTO_HW
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-27 12:31:50 +00:00
d24367572b
Delete config-default file and resync kernel configuration for brcm63xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-11 14:22:41 +00:00
25e156e1cf
brcm63xx image generation cleanups ( #3169 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-01 21:10:47 +00:00
7aa45daae1
Upgrade brcm63xx to 2.6.24
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-13 17:31:17 +00:00
3e3da83a17
[brcm63xx] resync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11 15:28:45 +00:00
884aca7088
upgrade & standardize kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11 10:50:40 +00:00
ebeae35053
fix initramfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-01 21:38:06 +00:00
62ccdcedae
make the image filenames a bit shorter
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10 23:08:11 +00:00
edfea6d60d
move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-23 15:12:12 +00:00
effa8fa4fd
add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ( closes : #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 18:37:24 +00:00
dab23ede10
clean up jffs2 config options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 20:58:16 +00:00
6665a2c1dc
adapt profiles for subtarget changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 20:04:43 +00:00
6bcd07afdd
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
92558d67a4
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
Imre Kaloz
Florian Fainelli
Gabor Juhos
Nicolas Thill
Felix Fietkau