b904d67782
[brcm63xx] use the correct number of GPIOs for bcm6358
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:01:03 +00:00
b86d85140f
[brcm63xx] register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 09:59:28 +00:00
11d0b7ea0a
[brcm63xx] merger mtu/802.1q related fixes:
...
bcm63xx integrated ethernet mac supports receiving and sending frames
bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-03 08:55:18 +00:00
693f304923
[brcm63xx] backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-01 18:27:51 +00:00
d30d9400c0
[brcm63xx] add support for sysupgrade ( #5117 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-17 16:53:57 +00:00
ca100df2da
[brmc63xx] register gpiodev
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 14:09:01 +00:00
b1b869ec99
[brcm63xx] fix redundant driver name printing in probe function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:32:54 +00:00
fb6c465ea7
[brcm63xx] make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson ( #4909 , #4943 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:18:48 +00:00
c1c91b95fc
[brcm63xx] some more fixes to the SPI controller driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-08 08:52:57 +00:00
a35170087e
[brcm63xx] enable all blocks on 6338 and uart clock on 6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-21 10:50:44 +00:00
718972f840
[brcm63xx] add support for bcm6345 SoC, needs testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-20 15:08:02 +00:00
1675d3bed9
[brcm63xx] fix SPI register switch and prepare for UDC, thanks to Henk Vergonet ( #4783 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 11:28:54 +00:00
4750ec9396
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 08:54:04 +00:00
4b5f21833c
[brcm63xx] do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-11 10:32:44 +00:00
6ee24eaca7
[brcm63xx] make SPI work in full-duplex mode by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-10 15:28:29 +00:00
cfd563d0c0
[brcm63xx] add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 15:27:46 +00:00
59da47705d
[brcm63xx] fix SPI accessors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 14:20:15 +00:00
4d87772497
[brcm63xx] fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:43:13 +00:00
2c319b5f1f
[brcm63xx] compile and register SPI controller device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:18:26 +00:00
9fb383ef35
[brcm63xx] make bcm6358 consistend with the other boards naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:17:19 +00:00
fc26c7a305
[brcm63xx] fix some SPI register definitions and platform-device registration code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:13:52 +00:00
8aa93e0c26
[brcm63xx] prepare for SPI controller driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:15:00 +00:00
fa5dbdf2dc
[brcm63xx] fix SPI register definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:13:10 +00:00
a7d3754b11
[brcm63xx] fix a bcm963xx-flash warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-02 18:55:47 +00:00
757c9f0080
[brcm63xx] provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:48:23 +00:00
9d8922c2f6
[brcm63xx] move the device registration to an earlier initcall level, required for fallback SPROM to work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:18:34 +00:00
2f386223ed
[brcm63xx] add support for user9102 boards ( #4537 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31 16:01:20 +00:00
32c15d9663
[brcm63xx] Add board definitions for the Davolink DV201AMR
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 14:54:13 +00:00
857f33fb68
[brcm63x] frequency is in Hz, thanks Joel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-17 15:29:36 +00:00
7e5847df7d
[brcm63xx] fix SPI register definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-15 22:53:32 +00:00
a584f05dfb
[brcm63xx] allow bcm6338 to get the base address of the memory controller register, required to detect memory size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-15 22:42:22 +00:00
ebf032ad8f
[brcm63xx] correct SPI register size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-06 14:49:27 +00:00
035ee6d188
[brcm63xx] add board registration of the bcm96338gw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-19 17:24:29 +00:00
9d2f0473b4
[brcm63xx] 6338 has no PCI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-19 17:08:11 +00:00
1f3fff3575
[brcm63xx] add experimental support for bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-19 17:05:09 +00:00
73f7ae7528
Register watchdog driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-19 15:00:33 +00:00
b2e0bd66f8
[brcm63xx] fix register definitions for bcm6358, thanks SGDA
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-19 10:19:00 +00:00
0211728b9f
Add bcm63xx_wdt but do not enable it yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-17 14:06:03 +00:00
2c6cedf116
Add support for Sagem F@ST2404 ( #4332 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10 16:13:41 +00:00
c6adce1144
Fix remaining bug of the off-by-one error ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-08 21:00:00 +00:00
9ece89311f
Enable ohci on bcm96348gw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-08 16:25:41 +00:00
dbb6568731
Prepare bcm63xx for SPI master support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-08 14:14:37 +00:00
f561c967a9
Add support for bcm96348gw10 (Netgear DG834GT) ( #4319 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-07 20:34:48 +00:00
4520a51863
Fix an off-by one printing error
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-02 14:11:54 +00:00
9ecf6c94fa
Improve Inventel Livebox support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-29 12:57:41 +00:00
95ea278ae9
[brcm63xx] bcm63xx MTD driver cleanup and fixes:
...
- convert to platform_driver
- get the window_size/addr from the board setup code
- indentation fixes
- remove duplicate code
- move bcm_tag declaration out of the MTD driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-27 20:40:03 +00:00
27cbe5f744
Commit changes on the files for gpiolib
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-27 10:38:36 +00:00
7813d1dd29
Flatten brcm63xx patches, should make our life easier to patch files now ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-26 18:41:01 +00:00
6684678a0b
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-20 21:26:11 +00:00
1064d5a460
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:30:22 +00:00
691021f3bb
Delete old brcm63xx files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-15 11:21:42 +00:00
735b2ea438
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-06 12:52:39 +00:00
5274d927c6
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-20 12:55:28 +00:00
7aa45daae1
Upgrade brcm63xx to 2.6.24
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-13 17:31:17 +00:00
92558d67a4
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
Florian Fainelli
Felix Fietkau