This adds diag leds/buttons support for Linksys E1000 V1. It worked on
my router, however it may need some tweaking by people more familiar
with openwrt and c to make it fit for commiting.
Thank you hhm for this patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34996 3c298f89-4303-0410-b956-a3cf2f4a3e73
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD. This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.
In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex. I was not able to isolate the source of the problem
(this patch, driver or H/W limitation). The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).
I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34992 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34991 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the version like it was send for mainline inclusion.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34988 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for blocking forwarding while address assignments
* Fix relay restarting function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34985 3c298f89-4303-0410-b956-a3cf2f4a3e73
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.
Mostly fixes#12346.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34974 3c298f89-4303-0410-b956-a3cf2f4a3e73
- introduce "list interface" options to specify the ifaces to listen on, takes uci- or network device name
- set the default system description to distrib @ hostname, e.g. "OpenWrt Barrier Breaker r34744 @ vbox"
- introduce "option lldp_description" to override the automatically generated description
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34970 3c298f89-4303-0410-b956-a3cf2f4a3e73
The folder layout changed between 3.6 and 3.7
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34960 3c298f89-4303-0410-b956-a3cf2f4a3e73
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34956 3c298f89-4303-0410-b956-a3cf2f4a3e73
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34955 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some header files from mac80211 are now moved to the uapi dir.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34937 3c298f89-4303-0410-b956-a3cf2f4a3e73
* was causing routing problems
* will be reimplemented using firewall
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add feature to decrease IPv6-specific MTU on-demand
* Add commands to enable / disable a site-border
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34895 3c298f89-4303-0410-b956-a3cf2f4a3e73
Calculate complements by using awk's xor() function with a mask of 0xffffffff
instead of relying on the compl() function which appears to produce broken
results on certain 64bit architectures.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34875 3c298f89-4303-0410-b956-a3cf2f4a3e73
procd is the new OpenWrt process management daemon. It keeps track of processes
started from init scripts (via ubus calls), and can suppress redundant service
start/restart requests when the config/environment has not changed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34865 3c298f89-4303-0410-b956-a3cf2f4a3e73
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.
This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34815 3c298f89-4303-0410-b956-a3cf2f4a3e73
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
The prefix / causes executables like mount, umount, etc. to be placed
in /bin /sbin which therewith replace the busybox symlinks.
mount and umount e.g. are linked again libmount.so.
This is e.g. fatal during a sysupgrade, where /bin/mount,
/bin/umount, etc. but not libmount.so get copied into a ramdisk
which will result in non working executables within the ramdisk.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34791 3c298f89-4303-0410-b956-a3cf2f4a3e73
Simple update for USB api changes.
Signed-off-by: Conor O'Gorman <i@conorogorman.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34770 3c298f89-4303-0410-b956-a3cf2f4a3e73
- support reading inactive gateways and DNS information in
network_get_gateway(), network_get_dnsserver() and network_get_dnssearch()
by passing "true" as optional last argument
- internally cache fetched values to speed up subsequent accesses to the same
data, introduce network_flush_cache() to clear them
- add some inline function documentation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34722 3c298f89-4303-0410-b956-a3cf2f4a3e73
Using variables from the outer scope unnecessarily complicates the code and
leads to issues.
This patch fixes the bug when having an "adhoc" wifi-iface section before a
"sta" section prevents wpa_supplicant from using the key specified in the
corresponding section as it tries to use the "adhoc" key instead (1 by
default).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34716 3c298f89-4303-0410-b956-a3cf2f4a3e73
This was done previously when dhcp was handled by the network scripts.
So netifd should behave the same.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34704 3c298f89-4303-0410-b956-a3cf2f4a3e73
wl_attach expects a physical address, as it performs the mapping internally.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34671 3c298f89-4303-0410-b956-a3cf2f4a3e73
Reverting commit 34641.
Function find_mtd_part() is needed by some scripts deployed
for certain targets but not including boot.sh after all.
Still, all this certainly needs some love.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34642 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since all scripts using this function include /lib/functions/boot.sh -
where this function is defined as well - it can be dropped
from /lib/functions.sh. Also avoids further confusion about this
function being declared and defined in two different places.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34641 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also remove the superfluous ones for ath5k, p54.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34637 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Deprecates ULA prefixes when there are other public prefixes
* Fixes issues with clients using incorrect source addresses
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34630 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is required for 3.6+ kernels and some sound SoC modules.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34618 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is required by some keyboard drivers in 3.6+
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34614 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Make ula_prefix a global option
* Add preliminary support for NAT (Linux >= 3.7, ip6tables >= 1.4.17)
* Minor fixes for prefix fallback
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34586 3c298f89-4303-0410-b956-a3cf2f4a3e73
Since the switch to netifd, proto handlers may always set the defaultroute
and provide dns server addresses, netifd will decide in the generic code
path whether the announced values are masked or not.
Additionally protocol handlers should not modify the routing tables themselves
and prevent any launched services from doing so.
Remove the additional defaultroute and peerdns option handling from the ppp.sh
protocol handler and rely on netifd to mask or not mask the values.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34536 3c298f89-4303-0410-b956-a3cf2f4a3e73
At present, if you select the iconv utility it will be built but not
installed. This patch adds the clauses necessary to the Makefile to
actually install iconv.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34530 3c298f89-4303-0410-b956-a3cf2f4a3e73
Now that we package individual tools as well, the list of ATM tools is
pretty big to deserve its own submenu.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34504 3c298f89-4303-0410-b956-a3cf2f4a3e73
Upstream has a few code cleanups, more eagerly burns sensitive memory and
includes the fix for CVE-2012-0920. Full changelog:
https://matt.ucc.asn.au/dropbear/CHANGES
Local changes:
- Removed PKG_MULTI which is no longer in options.h (even before 2011.54)
- Merged DO_HOST_LOOKUP into 120-openwrt_options.patch
- Removed LD from make opts (now included in TARGET_CONFIGURE_OPTS)
- Removed 400-CVE-2012-0920.patch which is included in 2012.55
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34496 3c298f89-4303-0410-b956-a3cf2f4a3e73
Instead of commenting the inclusion of some binaries, just make them
available using a new package "atm-debug-tools."
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34477 3c298f89-4303-0410-b956-a3cf2f4a3e73
- use comment match to keep track of per-network rules
- setup reflection for any interface which is part of a masqueraded zone, not just "wan"
- delete per-network reflection rules if network is brought down
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34472 3c298f89-4303-0410-b956-a3cf2f4a3e73
Previously only the first macfilter configuration would have been used
on all interfaces. However, the configuration was always done per vif
already. Hence, move the macfilter setup into hostapd.sh where and
create one mac list file per vif.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mode 'downstream' renamed to 'router'
* mode 'upstream' renamed to 'dhcpv6'
* mode 'relay' added
* cleanups and minor bugfixes in state handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34466 3c298f89-4303-0410-b956-a3cf2f4a3e73
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.
This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34442 3c298f89-4303-0410-b956-a3cf2f4a3e73
* The device should get a unique name at the beginning and not wl%d.
* load the nvram just one time into the own buffer, also when there is
more than one device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34381 3c298f89-4303-0410-b956-a3cf2f4a3e73
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thanks to Frank Meerkötter and Szabolcs Nagy for spotting the issue.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34326 3c298f89-4303-0410-b956-a3cf2f4a3e73
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34314 3c298f89-4303-0410-b956-a3cf2f4a3e73
Spotted while building against musl libc.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34312 3c298f89-4303-0410-b956-a3cf2f4a3e73
musl-libc is more strict about missing includes.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34311 3c298f89-4303-0410-b956-a3cf2f4a3e73
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34308 3c298f89-4303-0410-b956-a3cf2f4a3e73
Not all libcs have support for tm_gmtoff which is only available for BSD
compatibility, and guarded with __USE_BSD defines, use __tm_gmtoff otherwise.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34307 3c298f89-4303-0410-b956-a3cf2f4a3e73
Don't hide crypo submodules unless crypo-core is selected.
Fixes kmods depending on crypto modules being unselectable
until crypto core is selected (like ext4 on 3.6 or mac80211).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34298 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some libcs need this header to be explicitely included (e.g: musl)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34295 3c298f89-4303-0410-b956-a3cf2f4a3e73
We do not use anything from it, and it is not available with all libcs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34294 3c298f89-4303-0410-b956-a3cf2f4a3e73
libthread_db.so.$(LIBC_SO_VERSION) is only valid for uClibc, (e)glibc just
provides libthread_db.so.1.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34292 3c298f89-4303-0410-b956-a3cf2f4a3e73
due to a small error in the atm-tools package we are not deploying
atmarp/atmarpd but instead the (useless) libtool-wrappers.
Signed-Off-By: Frank Meerkötter <frank@meerkoetter.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34287 3c298f89-4303-0410-b956-a3cf2f4a3e73
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34269 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is needed for WiFi to work e.g. on DIR-615 rev.H1.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34268 3c298f89-4303-0410-b956-a3cf2f4a3e73
Felix Fietkau
Hauke Mehrtens
Steven Barth
Jo-Philipp Wich
John Crispin
Gabor Juhos
Mirko Vogt
Luka Perkov
Florian Fainelli
Jonas Gorski