bf058a1b97
[omap35xx] Bumper gumstix kernel version to 2.6.36
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-28 08:53:14 +00:00
2701bec564
[kernel] Add 2.6.36 config for gumstix board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-28 08:47:48 +00:00
38f55875a4
[omap35xx] add package python-cjson to gumstix profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-06 13:56:43 +00:00
0811beca08
Update kernel to 2.6.34.5, add USB storage to profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-26 11:24:23 +00:00
7938a816d4
[gumstix] Switch of echo on ttyS1 (required for bluetooth to function correctly)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-10 10:39:39 +00:00
59e915b7b6
[gumstix] Add stty to default config (required for gumstix bluetooth setup)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-10 09:39:56 +00:00
301e305202
[gumstix] enable gpio uesrspace interface via sysfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-10 07:20:01 +00:00
2794642ede
[gumstix] Remove sqlite from default config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-10 07:14:16 +00:00
6f7efa6f9a
Remove shells from unavalable serial ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-10 07:10:12 +00:00
b4ecc526cb
gumstix: Update wifi default settings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06 11:12:36 +00:00
81c26adf95
gumstix: Change defconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-04 11:25:34 +00:00
eef2acd974
omap35xx: Add temporary fix for marvell wlan MAC address detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-04 10:10:48 +00:00
eecb8493c7
[gumstix] Remove profile no longer required
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-19 12:29:41 +00:00
5281f4b5aa
[gumstix] replace dropbear with openssh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-19 12:13:47 +00:00
2c4ec812d7
Add a profile including Jamvm for Gumstix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-16 09:20:06 +00:00
322db99564
gumstix: add luci
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-08 12:46:36 +00:00
7c7e9834f8
[omap35xx] Add kmod-usb-hid
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-07 12:30:29 +00:00
3d85c7499e
Add script support for Marvell 88W8686 mac80211.
...
This is a hack now, but it works. cfg80211 is very broken
in the current mainline Marvell driver. A new patch set to
address this is in linux-next, I just do not have time
today to address it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-25 08:11:54 +00:00
30f8566f4b
Use modules for wifi and usb
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-25 08:08:05 +00:00
a4edb39d45
[omap35xx] Add c++ std library to gumstix rte
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-22 07:07:24 +00:00
4e37ed8184
Refactor omap35xx sub-targets to cater for beagleboard and gumstix overo
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-21 11:59:59 +00:00
Hamish Guthrie