Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Backport of r46986
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46988 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46985
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46987 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46904
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46905 3c298f89-4303-0410-b956-a3cf2f4a3e73
This isn't that important due to different NAND driver but keeps DTS and
backports consistent.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Inspired by r46892 (trunk).
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46902 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46900
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46901 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was accidentally added in r46094.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46849 3c298f89-4303-0410-b956-a3cf2f4a3e73
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Backport of r46491.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46848 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was corrupted in r38528. The most obvious symptom is repeated messages like this:
Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
Backport of r46821
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46822 3c298f89-4303-0410-b956-a3cf2f4a3e73
It also uses different block size just like WGR614 V10.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46810
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46812 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46807
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46808 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46766
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46767 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46737
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.
This fixes#20179
Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46751 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46749
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes#17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73
This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46736 3c298f89-4303-0410-b956-a3cf2f4a3e73
This prepares some place for backporting extra patches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46735 3c298f89-4303-0410-b956-a3cf2f4a3e73
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes#20407.
Backport of r46727.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46728 3c298f89-4303-0410-b956-a3cf2f4a3e73
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Backport of r46711.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46712 3c298f89-4303-0410-b956-a3cf2f4a3e73
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Backport of r46708.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46710 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Backport of r46707.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46709 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46698 3c298f89-4303-0410-b956-a3cf2f4a3e73
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46691 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46688
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46689 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of 46603.
This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix#20134.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46681 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46612.
fix generating syscall-names.h
Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.
For example the bit/syscall.h from musl for i386 has this:
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
With this patch the resulting array looks like this:
[259] = "timer_create",
[(__NR_timer_create+1)] = "timer_settime",
This closes#20195.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46679 3c298f89-4303-0410-b956-a3cf2f4a3e73
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46666
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46675 3c298f89-4303-0410-b956-a3cf2f4a3e73
Kinda-backport of r46415, though this patch uses the old-style calibration data loading.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46589
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46591 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46496
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46590 3c298f89-4303-0410-b956-a3cf2f4a3e73
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46586 3c298f89-4303-0410-b956-a3cf2f4a3e73
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46584
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46585 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was missed in the r46471.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46582
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46583 3c298f89-4303-0410-b956-a3cf2f4a3e73
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46471
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46581 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
In 15.05-rc2 we got support for "set-interval" and "clear-interval"
which got dropped with the update of procd done in r46257. This new
"button" action provides similar functionality so it makes sense to
backport it to 15.05.
Backport of r46578
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46579 3c298f89-4303-0410-b956-a3cf2f4a3e73
The name of the module was wrong before.
This should fix#20283.
backport of r46574.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46577 3c298f89-4303-0410-b956-a3cf2f4a3e73
Felix Fietkau
Steven Barth
Rafał Miłecki
Jonas Gorski
Hauke Mehrtens
Imre Kaloz
Jo-Philipp Wich
John Crispin