Commit Graph

182 Commits (77b81718cbcdbfd9a3615d739443fe528f88d9c2)

Author SHA1 Message Date
Gabor Juhos 966de4fbd4 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
Gabor Juhos 857cf6d227 ramips: allow USB
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:42:07 +00:00
Hauke Mehrtens 3de7c99eb3 kernel: update kernel version to 2.6.34.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22759 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-22 13:26:06 +00:00
Gabor Juhos d572e1483f ramips: add support for Sparklan WCR-150GN board
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
Florian Fainelli 8eb26298e5 [ramips] fix jffs2 64k and 128k images overwrite each other
When trying to build images with jffs2 filesystem for ramips platform
there is only one jffs2 image produced instead of two (64k and 128k).

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-31 11:42:17 +00:00
Gabor Juhos 956de1c120 ramips: enable ethernet driver for rt288x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:49 +00:00
Gabor Juhos 62d8c17df5 ramips: register ethernet device on the RT-N15
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:46 +00:00
Gabor Juhos 5c7c1c3dba ramips: add generic ethernet device for the RT288x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:43 +00:00
Gabor Juhos 69e79c381f ramips: add mdio_cfg configuration for the ethernet driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:40 +00:00
Gabor Juhos 5cce2b0a05 ramips: Fix bridging in ramips ethernet driver
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:07 +00:00
Gabor Juhos 33eba7e060 ramips: protect GPIO register access with a spinlock
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:04 +00:00
Gabor Juhos 4636b12f8a ramips: sync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:02 +00:00
Hauke Mehrtens 924f0f93f9 kernel: update to kernel 2.6.34.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-10 22:39:52 +00:00
Alexandros C. Couloumbis 7c4b4feec9 fix commit r21994 (thanks juhosg)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-30 19:46:45 +00:00
Alexandros C. Couloumbis 9d0627a92d fix commit r21993
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-30 19:35:12 +00:00
Gabor Juhos d501f36856 generic: merge mips multi machine update to generic patches for 2.6.34
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-04 19:09:52 +00:00
Gabor Juhos c60cbd2e61 generic: merge mips multi machine update to generic patches for 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-04 19:09:46 +00:00
John Crispin c463512391 Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
Signed-off-by: Helmut Schaa



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31 11:57:32 +00:00
Daniel Dickinson fe3f850ad0 ramips: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ramips.sh was sourced
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 03:21:00 +00:00
Gabor Juhos 464c781c2b ramips: merge slab patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:28 +00:00
Gabor Juhos 5430b616f4 ramips: use COMMAND_LINE_SIZE directly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:24 +00:00
Gabor Juhos 03224479d8 ramips: add missing 2.6.34 config files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:21 +00:00
Gabor Juhos 60a510ae0a ramips: refresh 2.6.34 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:16 +00:00
Gabor Juhos dd563c22da ramips: sync 2.6.32 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:10 +00:00
John Crispin 02c3a2aa53 [ramips] update to 2.6.34, signed of by russiane39, thx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-26 15:53:05 +00:00
Hauke Mehrtens 0710ef015d kernel: update kernel to version 2.6.32.13 and 2.6.33.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-23 13:16:51 +00:00
Alexandros C. Couloumbis 9c40666ff7 sync to kernel 2.6.32.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 14:30:08 +00:00
Nicolas Thill f9541ac0d4 package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 14:08:49 +00:00
Gabor Juhos 0baf6687af ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 09:25:37 +00:00
Nicolas Thill 67e3d74d54 target/ramips: fix another typo from [20834] (closes: #7182)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-19 01:14:29 +00:00
Nicolas Thill 9d42bb1a21 define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12 23:15:56 +00:00
Gabor Juhos c2044506bd ramips: nuke clocksource init patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:30 +00:00
Gabor Juhos 5bf4a5903b ramips: generate sysupgrade images for the rt305x devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:28 +00:00
Gabor Juhos bd9c7b83ae ramips: add sysupgrade support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:25 +00:00
Gabor Juhos 43878f9c0f ramips: add diag support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:23 +00:00
Gabor Juhos b3b2e91626 ramips: enable image commandline hack and cmdline partition parsing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:20 +00:00
Gabor Juhos bcfb5e7a8f ramips: add default profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 17:47:17 +00:00
Gabor Juhos 9518d27e8e ramips: add wpad-mini to the default packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 09:58:33 +00:00
Gabor Juhos 0b03ed8938 ramips: annotate device register function prototypes with __init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:28 +00:00
Gabor Juhos 21a793245c ramips: register wifi device for the RT2880 based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:23 +00:00
Gabor Juhos d06a46616e ramips: add wifi device for the RT2880 as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:20 +00:00
Gabor Juhos 7e95b7a597 ramips: register wifi device on the rt305x based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:10 +00:00
Gabor Juhos 3edf8b4ac9 ramips: sync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:05 +00:00
John Crispin b58b53b236 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 12:04:05 +00:00
John Crispin cfafa18012 [ramips] Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 10:06:05 +00:00
Gabor Juhos 8e67ddaccc kernel: update to 2.6.32.10
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 10:45:25 +00:00
Felix Fietkau 2e64f11f68 the mips -ffreestanding patch has been unnecessary for a long time now, remove it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-11 18:48:50 +00:00
Nicolas Thill f71d2a3f8e do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-11 09:50:11 +00:00
Hauke Mehrtens 10bdcf0917 kernel: update to kernel 2.6.32.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 10:16:47 +00:00
Travis Kemen 37065ca92f update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolar
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-12 01:12:11 +00:00