4c0d33f7dd
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:01 +00:00
8077760419
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:00 +00:00
60091b17d1
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:47:58 +00:00
ed27b638cd
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:28 +00:00
63a2533400
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:27 +00:00
90c05775ac
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 22:08:54 +00:00
82f7bd78ce
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 21:12:20 +00:00
dd77aab2d5
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 20:15:18 +00:00
d2c33eba70
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 17:24:30 +00:00
a8ec452c60
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 19:52:02 +00:00
1517cc75d2
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 12:21:15 +00:00
4f3acd22a4
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 17:11:06 +00:00
e737bdee77
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:42 +00:00
0011f2872a
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:40 +00:00
a08582ccd1
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:39 +00:00
b84f40ff4a
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:38 +00:00
7a1382cd1d
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:37 +00:00
c2e77b8ab2
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:58 +00:00
71b8bf1a54
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:57 +00:00
68bb4e22cc
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:55 +00:00
a65df2f1ec
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:13 +00:00
20a0a23021
ar71xx: rw2458n - fix flash parts
...
See #12338 . Redwave rw2458 has uboot, not redboot.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19 18:32:49 +00:00
e815a0702a
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:50 +00:00
4827530f6e
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:48 +00:00
991bc12eb0
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:47 +00:00
5e39bae8bd
ar71xx: add a helper function for setting up ETH_CFG register on AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:45 +00:00
6b329c076f
ar71xx: OM2P-HS sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 08:26:05 +00:00
868a0c9780
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 08:26:01 +00:00
012639a111
ar71xx: fix sysupgrade for jjPlus JWAP003
...
[juhosg: change commit message]
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:26 +00:00
284b606488
ar71xx: ew-dorin: added ethernet switch configuration
...
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:25 +00:00
93d22ab55b
ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
...
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.
[juhosg: fix OpenMesh template instead of use of string substitution]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:22 +00:00
9eb5ed1482
ar71xx: build image for the TL-WR841N/ND v8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:06 +00:00
276b0a594d
ar71xx: user-space support for TL-WR841N/ND v8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:05 +00:00
4d225ea147
ar71xx: add support for the TL-WR841N/ND v8 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:03 +00:00
f2c23625e1
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:42 +00:00
cd7d6a23f7
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:41 +00:00
40e58ce1c3
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:40 +00:00
020a46d895
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:38 +00:00
685cfcf229
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:49:43 +00:00
2fce460e3b
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
87b3f288c1
ar71xx: fix a typo in TEW-637GRU image names
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:32:25 +00:00
2b11550938
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18 14:30:57 +00:00
e3bad0e624
ar71xx: register the NAND flash controller device on DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:57 +00:00
d5c1c3c4f3
ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:55 +00:00
821819c0fd
ar71xx: ar934x_nfc: increase DMA retry count
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:54 +00:00
9ffbc4ff02
ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:53 +00:00
375b85687f
ar71xx: ar934x_nfc: fix RNDOUT operation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:51 +00:00
b31a6ffbb7
ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 20:30:50 +00:00
4ea95cae7d
[ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 14:17:12 +00:00
0611e73d53
ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17 11:17:29 +00:00
6826f8137a
ar71xx: fix WP543 image builds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15 10:21:21 +00:00
dfae978f1f
ar71xx: merge machine support patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:28 +00:00
76e3187aa2
ar71xx: register the NAND controller device on the RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:26 +00:00
30da844351
ar71xx: add device registration code for the AR934x NAND flash controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:25 +00:00
488c801a0a
ar71xx: package the AR934x NAND driver module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:23 +00:00
83d96d137b
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 07:26:22 +00:00
92cf14032d
ar71xx: define NAND controller base address and register size for AR934X/QCA955x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12 19:06:38 +00:00
888f24c4a4
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10 14:38:01 +00:00
9f2bbfb423
ar71xx: fix QCA955X_EHCI_SIZE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10 14:32:54 +00:00
11c0146a2b
[ar71xx] fix description of nand/Ath5k profile ( #12149 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 21:40:26 +00:00
cb49889809
ar71xx: add initial support for RB2011UAS-2HnD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:32 +00:00
0ea5d33e08
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:30 +00:00
2a30d5c072
ar71xx: add RouterBoot related helper routines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:28 +00:00
d90a416bf5
ar71xx: define MTD partitions for RB2011
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:24 +00:00
9b0f8cd250
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:22 +00:00
26e1a6b953
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:20 +00:00
773fa9a77f
ar71xx: add dynamic MDIO clock calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09 14:05:17 +00:00
46d2e6a5b9
ar71xx: use the RLE library for RB751
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:56 +00:00
eadecf68d8
ar71xx: add library code for RLE decoding
...
It will be used for the MikroTik boards.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 17:51:54 +00:00
4bae61be20
ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 13:39:09 +00:00
22d4d1fb84
ar71xx: refresh kernel patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 13:39:04 +00:00
acf052c5ce
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06 18:15:26 +00:00
a74ed9bf17
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:26:50 +00:00
34ed9e63e7
ar71xx: add rssileds to package set in profile for devices which got them.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 19:22:51 +00:00
22fef4fdc7
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
...
That was based on assumptions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:55 +00:00
bbf079b1d1
ar71xx: all0315n: fix ethernet according to vendor info
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:54 +00:00
9a56a87ead
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:53 +00:00
34df781dc4
ar71xx: image: fix Profile name for TL-WA701 ( closes #12094 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:37:30 +00:00
baf5f4c4c9
ar71xx: Buffalo WZR-HP-AG300H LED support
...
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29 10:11:55 +00:00
6a0998c459
ar71xx: add profile for Allnet devices
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:38 +00:00
268ef7af33
ar71xx: generate image for ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:37 +00:00
1c8d93e18a
ar71xx: sysupgrade for the ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:36 +00:00
405863302d
ar71xx: rename all0258n.sh to allnet.sh
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:35 +00:00
4c72895d51
ar71xx: detect ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:32 +00:00
eedcda6a27
ar71xx: add support for the Allnet ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:31 +00:00
f4fbd75f87
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-27 14:55:26 +00:00
f70db0dfef
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
...
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 08:15:11 +00:00
9ac554e5c1
ar71xx: image: fix TL-WR1043ND board id ( #12079 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-26 06:30:37 +00:00
c6d673ffc0
ar71xx: image: group and sort {Single,Multi}Profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:17:47 +00:00
d79ba9fa20
ar71xx: image: group and sort mtdlayout definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:14:35 +00:00
830413bd2e
ar71xx: image: use the MultiProfile helper for the Madwifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:11:25 +00:00
c0c61c0e85
ar71xx: image: automatically build a list of SingleProfiles
...
Use that for Default/Minimal profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:08:15 +00:00
e5e4cacd0a
ar71xx: image: use the new helpers for the ZyXEL images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:05:05 +00:00
cd86a7714a
ar71xx: image: use the new helpers for the Zcomax images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 13:01:55 +00:00
047efd5853
ar71xx: image: use the new helpers for the WRT400 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:58:45 +00:00
ea4d3fac82
ar71xx: image: use the new helpers for the WZRHPG30XNH images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:55:35 +00:00
07649c8d9b
ar71xx: image: use the new helpers for the WHRHPG300N images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:52:25 +00:00
ec065bb299
ar71xx: image: use the new helpers for the UBNTXM images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:49:15 +00:00
0b8df57570
ar71xx: image: use the new helpers for the UBNT images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:46:06 +00:00
346334f34b
ar71xx: image: use the new helpers for the TPLINKOLD images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-23 12:42:56 +00:00
Gabor Juhos
Daniel Dickinson
Felix Fietkau
Jo-Philipp Wich