- implement --add-dest and --add-arch commandline options, this allows to run entirely without configuration
- tweak default config location patch to not require a config in offline root mode
- rename --force-run-hooks option to --force-postinstall, its a more appropriate name
- utilize new opkg commandline options in package-ipkg.mk and remove config file generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23032 3c298f89-4303-0410-b956-a3cf2f4a3e73
- simplify masquerade rule setup
- remove various subshell invocations
- speedup fw() by not relying on xargs and pipes
- rework SNAT support - attach to dest zone, use src_dip/src_dport as snat source
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23024 3c298f89-4303-0410-b956-a3cf2f4a3e73
The CFE of the WRT54G3GV2 expects two firmware images, if one of them
produces a CRC error (which is the case after you installed OpenWrt, as
there is no second image), it writes one of three consecutive bytes to
the flash. (Look for "Image Status : IMG2_BAD" during boot.)
After the third boot with a CRC error, it stops and waits for a new
firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot.
Tested with my own box.
Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23007 3c298f89-4303-0410-b956-a3cf2f4a3e73
26 Makefile patches for enabling parallel builds. Tested on Linux (8-core) and Darwin (12-core), individually and from clean build_root. The first set is from trunk, the second is from feeds/packages.
Signed-off-by: Joe Roback <joe@roback.cc>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22965 3c298f89-4303-0410-b956-a3cf2f4a3e73
extracted firmware files were generated with an incorrect umask
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22957 3c298f89-4303-0410-b956-a3cf2f4a3e73
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22945 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22943 3c298f89-4303-0410-b956-a3cf2f4a3e73
- fix possible endless loop when the family option is used for forwardings
- only generate forwarding rules in SNAT redirect sections if src_dip is specified
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22938 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch exposes the GPIO mask as a module option. This
makes it possible to limit the GPIO lines used by the b43 module.
Useful for those using the GPIO lines for other things like mmc over GPIO.
It is helpful to those not able / interested in recompiling OpenWRT themselves.
The default action is the same as before, that is 0xf gpiomask.
Signed-off-by: Simon Gaynor <openwrt@simong.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22927 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds a new kmod-sctp option that enables support of SCTP in 2.6x
kernels.
The patch also contains a small cleanup in the dependencies.
Signed-off-by: Sebastien Decugis <sdecugis@nict.go.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22917 3c298f89-4303-0410-b956-a3cf2f4a3e73
needed for proper dm-crypt support
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22915 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support to compile kmod-usb-serial-ipw module. It is
used by USB IPWireless communication devices used for 3G.
Signed-off-by: Lukas macura <macura@opf.slu.cz>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22891 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds a separate kernel package for x86 cpu msr support.
MSR module is needed e.g. when updating coreboot bios on alix boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22890 3c298f89-4303-0410-b956-a3cf2f4a3e73
The he.net ipv6 tunnels require that a user supply the md5sum of his password
when updating the ipv4 tunnel endpoint. the 6in4 package supports this well,
but requires that a user store his password in plaintext in uci. this patch
tries to detect whether the password in uci is already an md5sum
(32 characters containing only [a-z0-9]), so users can avoid storing plaintext
passwords.
Signed-off-by: Steven Brudenell <steven.brudenell@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22889 3c298f89-4303-0410-b956-a3cf2f4a3e73
- handle NAT reflection in firewall hotplug, solves synchronizing issues on boot
- introduce masq_src and masq_dest options to limit zone masq to specific ip ranges, supports multiple subnets and negation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22888 3c298f89-4303-0410-b956-a3cf2f4a3e73
Felix Fietkau
Alexandros C. Couloumbis
Jo-Philipp Wich
Michael Büsch
Florian Fainelli
John Crispin
Gabor Juhos