Commit Graph

435 Commits (7399ef5411bc1bc9e68f04a4bb4ba9b7cdc2a54b)

Author SHA1 Message Date
Gabor Juhos 06640cbff5 ar71xx: build image for TL-WDR4300v1 (IL)
The version of TL-WDR4300 sold in Israel comes with a different
hardware id.

Patch-by: Daniel <daniel@makrotopia.org>
Patchwork: http://patchwork.openwrt.org/patch/5001/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27 06:36:59 +00:00
Gabor Juhos 93c10a50e6 ar71xx: add profile and build firmware image for the Oolite v1 board
Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27 06:36:57 +00:00
Felix Fietkau dd89412cf3 ar71xx: Add 16MB Flash version for Embedded Wireless Dorin Platform
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-28 11:08:14 +00:00
Gabor Juhos 0dc3968b6a ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-19 12:15:35 +00:00
Gabor Juhos 8ed16ce49a ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>

Without this patch, UART output will show only 4 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000050000 : "u-boot"
  [    0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
  [    0.770000] 0x000000070000-0x0000007f0000 : "firmware"
  [    0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"

With this patch, UART out will show 7 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000040000 : "u-boot"
  [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
  [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
  [    0.780000] 2 netgear-fw partitions found on MTD device firmware
  [    0.780000] 0x000000050000-0x00000014b440 : "kernel"
  [    0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
  [    0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
  [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
  [    0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
  [    0.840000] 0x0000007f0000-0x000000800000 : "art"

This patch is tested against r39502 of trunk.

Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-18 17:34:16 +00:00
Jo-Philipp Wich 731543f24d ar71xx: fix mtdpartsize macro in image Makefile (#14961)
The mtdpartsize macro triggers shell errors on various Linux distributions
when the partname argument $(1) does not appear within the partmap $(2).

Change the sed pattern to only emit anything if a successful substitution
occured and only evaluate the arithmetic expression if something was printed
by the sed program.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-13 21:19:00 +00:00
Gabor Juhos 66745cce93 ar71xx: image: reserve 4 erase blocks on the TP-Link devices
This ensures that the generated images will have enough erase
blocks for JFFS2.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-25 18:12:13 +00:00
Gabor Juhos 2ecc39baaf ar71xx: image: move WNDAP360 macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-25 08:31:45 +00:00
Gabor Juhos a03765d9c1 ar71xx: image: generate sysupgrade images for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-24 17:15:03 +00:00
Gabor Juhos 62ba78a061 ar71xx: image: use a single firmware partition on Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-24 17:15:01 +00:00
Gabor Juhos f17ed6238c ar71xx: image: detect partition sizes in the Image/Build/Ath macro
Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-24 11:59:35 +00:00
Gabor Juhos cb3f2947b1 ar71xx: image: fix size verification in the CatFiles macro
The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-24 11:59:32 +00:00
Gabor Juhos 012e39533b ar71xx: ap83: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-23 16:47:42 +00:00
Gabor Juhos 7440134ef2 ar71xx: ap81: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-23 16:47:41 +00:00
Gabor Juhos ce15b12727 ar71xx: image: show size limit in warning messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-23 12:27:28 +00:00
Gabor Juhos 1a9d146ed5 ar71xx: add initramfs image support for Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-23 12:23:10 +00:00
Imre Kaloz 7804da9d6e [ar71xx]: generate images for the On Networks N150 (rebranded Netgear WNR612v2)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-18 19:44:40 +00:00
Gabor Juhos 7ab73136cc ar71xx: enable images for WD My Net N750
Now that the switch works correctly we can enable the images for this
board.

Flashing from the factory firmware, the factory failsafe loader and
sysupgrade was tested successfully.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4617/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-17 22:14:13 +00:00
Gabor Juhos 8ca4a0748b ar71xx: build image for the TP-Link TL-WA901ND v3 board
Based-on: http://patchwork.openwrt.org/patch/4507/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15 21:34:20 +00:00
Gabor Juhos 7a5c1eef3a ar71xx: build firmware image for the TL-WA801ND v2
Patch to add the profile for the TP-LINK WA801ND v2

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4502/
[juhosg: change subject]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15 20:39:12 +00:00
Gabor Juhos 10184a0b27 ar71xx: image: unify CyberTAN macros
Make the Image/Build/CyberTAN macro more generic,
and use simple wrappers for the GZIP/LZMA variants.
This simplifies the Makefile a bit, and allows to
build sysupgrade images for the devices which are
using LZMA compressed uImages.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30 18:31:01 +00:00
Gabor Juhos a03d5162b4 ar71xx: image: fix CyberTAN sysupgrade images
In the current sysupgrade images, the CRC32 value of
the TRX header covers the whole rootfs data. Due to
this, the CRC value should be changed during sysupgrade
otherwise the bootloader refuses to load the image on
the next boot.

Change the image generation to create sysupgrade images
where the CRC32 value covers the kernel data only. This
allows to skip the 'fixtrx' step during sysupgrade on
the target.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30 18:30:59 +00:00
Gabor Juhos 4cb2f7a39a ar71xx: build image for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29 20:51:16 +00:00
Gabor Juhos 2477a6beac ar71xx: add profile and build image for the Sitecom WLR-8100
- partitions on factory fw are a bit strange
  - unknown contained some strings in factory
  - unknown2 contains some atheros (2nd art ?)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4149/
[juhosg: edit commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29 20:18:50 +00:00
Gabor Juhos 6bf4a75ce9 ar71xx: add profile for the WR842N/ND v2
Patch to add the profile for the TP-LINK WR842N/ND v2
Small update, because of a change in the Makefile.

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4382/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15 10:11:25 +00:00
Felix Fietkau 945d0a1a12 ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot loader stop searching after the kernel partition
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14 19:04:48 +00:00
Gabor Juhos 207e5d5107 ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extender
Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11 08:04:48 +00:00
Gabor Juhos ee168f7c39 ar71xx: build image for the WD My Net Wi-Fi Range Extender
Patchwork: http://patchwork.openwrt.org/patch/4281/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
[juhosg:
  - remove the Image/Build/CyberTANLZMA/loader macro, it is not used
  - move the MYNETREXT SingleProfile definition to the correct place]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07 22:31:54 +00:00
Gabor Juhos 0b9fb616ed ar71xx: image: add EOF marker to the WNDR4300 UBI image
Append EOF markers to the END of the UBI image
file. This forces the kernel to erase all blocks
after the marker even if those blocks are not
empty.

Additionally, the resulting image can be flashed
from the original web UI now, so use '-factory'
suffix for that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07 19:53:02 +00:00
Gabor Juhos a94e4655b5 ar71x: image: don't use the wndr3700 utility
Pass the uImage magic value directly to mkimage instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06 10:16:39 +00:00
Gabor Juhos 5673599dfd ar71xx: image: fix WNDR4300 initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05 18:41:20 +00:00
Gabor Juhos e4b7bcdcd5 ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05 18:41:18 +00:00
Gabor Juhos e553a34323 ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - restore the NetgearNAND/initramfs macro,
  - remove unused {Squash,Ubi}fsTemplate macros,
  - remove board specific mtd options from CONFIG_CMDLINE, append the
    board specific ubi.mtd parameter to the kernel command line instead,
  - increase kernel partition size to 2MiB,
  - use board specific ini file for ubinize,
  - put jffs2 eof mark into the rootfs_data ubi volume,
  - use KDIR_TMP for temporary images,
  - use the squashfs-raw image,
  - increase kernel partition size to 2MiB,
  - use a local ubinize macro,
  - fix macro parameter comments,
  - put the fake rootfs into the last erase block of the kernel
    partition,
  - move Image/Build/NetgearNAND/buildkernel macro before
    define Image/Build/NetgearNAND,
  - don't use the wndr3700 utility, use '-M' parameter of mkimage to set
    the uImage magic,
  - use '-recovery' suffix for the generated image, it is only usable via
    the fw_recovery function of the bootloader,
  - update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05 16:31:14 +00:00
Gabor Juhos 355c50d67c ar71xx: move WNDR4300 profile to the nand subtarget
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04 18:37:09 +00:00
Gabor Juhos 4a76cb79e7 ar71xx: image: dd root.* images in fs specific macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-04 18:37:06 +00:00
Gabor Juhos ea7515ccf3 ar71xx: image: only define profiles for the generic subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-01 18:33:24 +00:00
Gabor Juhos ebbbf32b07 ar71xx: image: add IMAGE_PROFILE variable
Ensures that the 'Default' images are generated
even if the subtarget has no profiles.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-01 18:33:22 +00:00
Gabor Juhos f1331472ec ar71xx: don't build uImages for the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30 06:54:55 +00:00
Gabor Juhos a82dc55eca ar71xx: add profile and build image for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - remove MultiProfile, it makes no sense for a single board
  - move SingleProfile call and the mtdlayout to a different
    location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30 06:50:59 +00:00
Gabor Juhos 7225a767f4 ar71xx: add profile and build image for the Dragino2 board
Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg: remove kernel+rootfs partition and use uimage split instead]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-30 06:50:53 +00:00
Imre Kaloz 5b2fa1ed89 [ar71xx]: make the generated images actually flashable on the Unifi devices.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-11 15:41:42 +00:00
Gabor Juhos 593f0bb174 ar71xx: use correct board id for TL-MR3040 v2
Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 18:42:14 +00:00
Gabor Juhos d39a5bff68 ar71xx: image: simplify mynet_n600_mtdlayout
Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:

  0x000000070000-0x000000ff0000 : "firmware"
  2 seama-fw partitions found on MTD device firmware
  0x000000070000-0x0000001b0000 : "kernel"
  0x0000001b0000-0x000000ff0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  1 squashfs-split partitions found on MTD device rootfs
  0x000000360000-0x000000ff0000 : "rootfs_data"
  0x000000ff0000-0x000001000000 : "radiocfg"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 12:19:57 +00:00
Gabor Juhos 6f78432c12 ar71xx: update the Image/Build/WZRHP macro
- append the root squashfs directly after the kernel,
 - use the 64kraw/128kraw template instead of the 64k/128k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on WZR-HP-G300NH and WZR-600DHP boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 09:36:26 +00:00
Gabor Juhos ea55acf64d ar71xx: image: use a common macro for Buffalo WZRHP devices
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 09:36:25 +00:00
Gabor Juhos 8922a20ab9 ar71xx: image: update Image/Build/CameoAP94 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-673GRU board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38151 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 08:14:44 +00:00
Gabor Juhos 5a6ca06c0d ar71xx: image: use a common macro for Cameo AP94 based devices
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 08:14:43 +00:00
Gabor Juhos 528cbc4a87 ar71xx: image: use the board name for temporary mtdpart files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 06:13:14 +00:00
Gabor Juhos 22e1fba31c ar71xx: update the Image/Build/UBNT2 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a WispStation M5 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 05:58:34 +00:00
Gabor Juhos bd0c886b58 ar71xx: build intramfs images for the Ubiquiti XM boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-24 05:58:32 +00:00