Reading the CFE properties causes system hangs on some devices. With
this patch nvram read will be successful very time so cfe will no be
read out. This code is not really correct but it will work around some
problems for some people.
Related ticket: #7693
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22663 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes#7702.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
space is used to store config values. When overwriting it the device
will not start any more.
closes#7630
Thank you realopty for testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22475 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix return codes of nvram_getenv. Now it behaves like cfe_getenv.
* also check cfe for kernel_args param.
* some style fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22424 3c298f89-4303-0410-b956-a3cf2f4a3e73
CFE does not boot images generated with these checksums because of
wrong checksum.
After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22418 3c298f89-4303-0410-b956-a3cf2f4a3e73
* reduce image size for CRC calculation by fs_mark size
sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22396 3c298f89-4303-0410-b956-a3cf2f4a3e73
more and more users are getting confused by this, and consider it a regression in brcm47xx,
because brcm-2.4 was not showing this message. It's not particularly interesting for debugging,
most of the time it only happens because of an unconnected port.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22110 3c298f89-4303-0410-b956-a3cf2f4a3e73
some CFE versions (i.e. WRT54G3Gv2-VF) expect two separate firmware
images which each consume half of the available flash space.
these changes check for the TRX header version and set the partition
size correctly.
Tested on G3Gv2-VF and Asus WL-500GP
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22019 3c298f89-4303-0410-b956-a3cf2f4a3e73
'factory' and 'sysupgrade' did not make much sense. A discussion
with jow convinced me that .trx results in a helpdesk disaster.
So I decided to use '.bin' for normal bin-headers and '.noheader.bin'
for the trx-v2 image.
I fixed the wiki accordingly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22013 3c298f89-4303-0410-b956-a3cf2f4a3e73
It is selected by CONFIG_JFFS2_LZMA which is set in the generic config.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21437 3c298f89-4303-0410-b956-a3cf2f4a3e73
* update pointers in struct hc_driver
* make ssb_ehci_detach more look like the pci version
* remove resume and suspend as they are never activated and not compiling
* replace ssb_ehci_start with ehci_run as it only calls this method
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21427 3c298f89-4303-0410-b956-a3cf2f4a3e73
Imre Kaloz
Florian Fainelli
Hauke Mehrtens
Alexandros C. Couloumbis
Markus Wigge
Daniel Dickinson
Felix Fietkau
Jo-Philipp Wich
Gabor Juhos
Nicolas Thill
Lars-Peter Clausen