6916e5eec4
brcm47xx: fix usb on more recent bcma based devices.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 17:21:52 +00:00
c9bc227e9d
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:16 +00:00
20b3755c63
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:10 +00:00
f3f765817f
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:05 +00:00
520d62a2e8
kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 08:45:13 +00:00
5f97cea3f0
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 05:43:53 +00:00
a5fdbc09b3
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
26415b5f86
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id ( #10649 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 01:27:48 +00:00
ac4e466297
[package] base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-20 17:25:15 +00:00
d1d3cd65a8
[package] firewall:
...
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them
- annotate default traffic rules with names
- bump version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-20 01:10:15 +00:00
1d37e5d523
brcm47xx: remove patch starting adding brcm4716 to ssb
...
brcm4716 is supported by bcma now we do not need this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:55:20 +00:00
0803c1b511
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
...
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:39:13 +00:00
a8b46480d3
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:33:03 +00:00
a4209940db
brcm47xx: remove support for kernel 2.6.39
...
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:26:15 +00:00
9d3acee299
mac80211: deactivate mac80211 tracing
...
Activating tracing on kernel <= 2.6.32 causes build errors.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:23:34 +00:00
d77a9507ed
ath9k: fix another tx locking issue
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 15:51:20 +00:00
69a1e0d185
mac80211: fix powersave setting
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 10:27:28 +00:00
7e96983fe1
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 09:04:15 +00:00
b809bbc100
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
13d5284cbf
mac80211: apply txpower after bringing up the interface, should fix #10113
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:19:21 +00:00
e807bd0870
mac80211: use iw instead of iwconfig to disable powersave
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:18:46 +00:00
112924dd64
ath9k: fix some issues in the btcoex disable patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:17:34 +00:00
3894ae522a
ar71xx: use 64kraw template on more TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 18:49:55 +00:00
a25574d801
ath9k: fix a locking issue in the tx path
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 14:28:25 +00:00
41900226bc
hostapd: add missing check for wds stations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 14:28:20 +00:00
15f4ea544b
ath9k: fix a crash in led init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-16 23:41:44 +00:00
e5d5ffcbc2
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
10a219ed66
ar71xx: add defines for the AR934X GMAC interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:36 +00:00
2b1b2e492f
ar71xx: fix GMAC1 interface speed on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:35 +00:00
56a02cffed
ar71xx: ag71xx: fix switch port setup for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:32 +00:00
5039a01b61
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:30 +00:00
59e650a276
ar71xx: ag71xx: setup switch interface mode on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:29 +00:00
3f45ffd8f2
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:28 +00:00
01036f2eae
ar71xx: allow to attach the internal switch for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:22 +00:00
691b20bcaf
ar71xx: introduce ar71xx_switch_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:11 +00:00
1c234742d6
ar71xx: build images for TL-WR741N/ND v2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:48 +00:00
ac0030116e
ar71x: use raw squashfs images for TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:46 +00:00
178dfb1db9
ar71xx: create a template for using unpadded squashfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:45 +00:00
3b391aa04c
ar71xx: put squash image right after the kernel on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:44 +00:00
2e0cc81c4e
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:42 +00:00
c0f856759b
ar71xx: tplinkpart: allow to detect JFFS2 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:40 +00:00
bc40f1dc75
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:23 +00:00
b480583892
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:21 +00:00
58bcc09552
ar71xx: ag71xx: nuke ar7240sw_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:20 +00:00
c1ff55ab84
ar71xx: fix mac addresses on jjPlus devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:18 +00:00
eca3afdccd
ath9k: fix a locking issue
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 21:03:52 +00:00
97ebf387ba
ar71xx: build image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:11 +00:00
1b89ef9b2c
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
9d5225b963
ar71xx: add GPIO function bit defines for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:07 +00:00
8a07cba2b5
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:51:26 +00:00
Hauke Mehrtens
Gabor Juhos
Felix Fietkau
Jonas Gorski
Jo-Philipp Wich