176af6bad9
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-31 18:11:55 +00:00
7278ed6283
base-files: abort sysupgrade if file specified with --restore-config is not found
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-31 14:10:34 +00:00
6578d45c34
base-files: implement -T (--test) sysupgrade parameter to verify image without actually flashing it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-30 16:42:05 +00:00
f647d04afe
base-files: be verbose when entering failsafe due to a button being pressed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25 20:28:36 +00:00
c475e599b4
base-files: add mtd_get_part_size helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 09:25:49 +00:00
3fdbe277fa
[package] base-files/busybox: move ntpd init script from base-files to busybox
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-17 22:24:45 +00:00
addf81e48e
base-files: reject invalid uci keys in network_get_device() and related procedures ( #13886 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 13:42:58 +00:00
4ea1473546
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:58 +00:00
ee1b454b4b
procd: add a small script that handles config reloads until configd is ready
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:54 +00:00
ebc1e02230
base-files: convert sysntpd init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:35 +00:00
79c725192b
base-files: run readlink on initscript name before opening services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:21 +00:00
db68332793
base-file: usbfs is no longer mounted under /proc/bus/usb
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:17 +00:00
3bdd443b58
base-files: add 2 missing variable defines
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-08 16:35:02 +00:00
21ee9d504d
package: fix insmod on install
...
the procd changes broke the postinst insmod.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-22 22:09:40 +00:00
1b9e69e5a8
base-files: module loading is now handled by ubox/kmodloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:59 +00:00
bd2c9d64a6
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:55 +00:00
5fe321461a
base-files: drop 2 pointless hotplug trigger stubs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:51 +00:00
dd3bdf1617
base-files: procd is now the init process
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:38 +00:00
97520d989f
base-files: procd init is now the default, remove files.old
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:26 +00:00
616aae91c8
base-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take ipv6-prefix-assignment into account, add further helper functions to fetch all ips of a given interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 11:33:36 +00:00
f8cb31d28a
base-files: remove unnecessary early sysctl-hack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11 14:10:45 +00:00
eda688921a
base-files: set default IPv6 forwarding value to 1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-11 13:30:18 +00:00
755a5b2ee5
procd: make the preinit rules wildcard all buttons for failsafe
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:44 +00:00
b21f877df0
sysupgrade: create state file so procd knows when a sysupgrade is in progress
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:31 +00:00
204d07bcd2
base-files: fix failsafe via button press
...
entering failsafe by pressing a button during boot was broken for procd as init
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:13 +00:00
64b1c42dac
base-files: change PATH order
...
This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:02 +00:00
e877c7b057
base-files: use less entropy when generating ULAs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06 09:52:00 +00:00
53b612f049
base-files: change network_find_wan() procedure to ignore default gateways in different routing tables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 09:33:56 +00:00
15816c9cce
sysupgrade: fixes broken pipe error during sysupgade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-05 12:41:42 +00:00
9801819da6
preinit: move cmdline failsafe= handling ot the generic code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36430 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:37 +00:00
1940283948
mount_root: prepare base-files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36429 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:32 +00:00
b605befa7c
boot: make use of kmodloader if it is available
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:28 +00:00
276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
9bfa7f54b7
base-files: firstboot: only ask for confirmation on TTY
...
Also allow '-y' to force the reset.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 12:39:42 +00:00
0499e77822
base-files: move sysctl init after boot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-26 10:02:58 +00:00
d1f931a2b8
base-files: fix bad start index in previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 18:45:23 +00:00
08fd7e4663
package/base-files: change sysctl handling
...
Move /etc/init.d/sysctl to index 00 and add hotplug script that applies
interface specific sysctls for interfaces that only appear later - this
allows to reliably configure per-interface parameters in sysctl.conf, e.g.
to disable ipv6 autoconfig on a specific iface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 18:43:30 +00:00
8b867fc2af
base-files: also apply r36107 to files.old
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-23 12:44:10 +00:00
9cba62ed1a
base-files: sysupgrade fail with eglibc
...
With eglibc, "ldd busybox" give us
libcrypt.so.1 => /lib/libcrypt.so.1 (0x774be000)
libm.so.6 => /lib/libm.so.6 (0x773e4000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x773c0000)
libc.so.6 => /lib/libc.so.6 (0x77276000)
/lib/ld.so.1 (0x774fe000)
Thus /lib/ld.so.1 is not printed by the libs fonction and isn't copied to the 'new' root before pivot root
libs() { ldd $* | awk '{print $3}'; }
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/common.sh
With uclibc the last line of "ldd busybox" is
ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x77ada000)
Don't know for musl!
This patch replace https://dev.openwrt.org/changeset/19167 , as glibc is gone
The other way around is to rework libs()
Please apply the fix (mine or another) on trunk and AA
Might fix https://dev.openwrt.org/ticket/12273
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-22 10:06:06 +00:00
13b11cb907
[base-files] sysupgrade was broken as procd was getting killed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:58 +00:00
47d1577ffb
[base-files] make basefiles aware of procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13 18:11:19 +00:00
fe6dbb1781
base-files: make firstboot ask for confirmation
...
To prevent accidential resets ask for confirmation (and default to n).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:14 +00:00
9b24e8bb6d
base-files: introduce commonly used helper functions for setting leds
...
Currently, most platforms define such helpers in their own diag.sh
implementation with almost identical code. By factoring out the
common ground it's possible to simplify maintainability and
homogenize the haptics over multiple platforms (so far as is
reasonably practicable, in a next step).
[juhosg:
- fix led_set_attr parameters in led_timer
- add led_morse and status_led_set_morse helpers
- add status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:23 +00:00
f3a456e5f1
base-files: minor cosmetic corrections for functions.sh
...
- update copyright header
- remove superfluous shebang left-over from changeset 34794
- unify function declaration
[juhosg: keep Vertical Communications' copyright notice]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 21:47:03 +00:00
9dd345481e
base-files: add macaddr_{add,2bin,setbit_la} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 11:50:22 +00:00
34fe9af047
base-files: add mtd_get_mac_{ascii,binary} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 11:50:19 +00:00
9cfe240468
base-files: Fix IPv6 early sysctls again
...
* Kernel IPv6 /proc interface inconsistency caused races
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-01 12:28:24 +00:00
581546b6d2
base-files: Fix race-conditions with IPv6 sysctls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-29 10:13:33 +00:00
0e5bdadcb3
base-files: remove IPv6-forwarding setting for all interfaces
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28 13:53:38 +00:00
Jo-Philipp Wich
John Crispin
Gabor Juhos
Luka Perkov
Felix Fietkau
Steven Barth
Jonas Gorski
Florian Fainelli