Commit Graph

11455 Commits (6390b285e91c43ff1406a6df6cdbf43ebdc33681)

Author SHA1 Message Date
John Crispin 49a6ad0207 [ramips] fix RT-N15 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:44 +00:00
John Crispin 147e52a665 [ramips] update rt2880.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:36 +00:00
John Crispin d8aae3517b [geneirc] fix rtl8366s OF binding
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:56:05 +00:00
Gabor Juhos bb114efbc8 mpc85xx: set preinit interface to eth0 by default
This makes the WDR4900 accessible via ethernet in
failsafe mode.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:25 +00:00
Gabor Juhos 0010d80ea9 mpc85xx: Generate fdt for P1020RDB
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:24 +00:00
Gabor Juhos 61ed0ce571 mpc85xx: Add P1020RDB board support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12 18:30:22 +00:00
John Crispin 0aa4ffad7a [lantiq] add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 19:18:07 +00:00
John Crispin 5bb33bd0cf [lantiq] add FE phy firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 19:17:48 +00:00
John Crispin ce4da1634d [lantiq] add missing pinmux patch
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11 07:12:37 +00:00
Felix Fietkau 47ffc8ff86 cns3xxx: fix USB ehci/ohci platform driver
Update ehci/ohci driver registration to conform to the new platform
drivers.

This fixes missing USB host support in 3.8.x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 16:20:50 +00:00
Felix Fietkau d72b418346 kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
Fixes booting on single-core CNS3xxx devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 16:07:50 +00:00
Felix Fietkau 89cca284e2 kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:45:12 +00:00
Felix Fietkau 87f078aee9 kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:29 +00:00
Felix Fietkau 494a34245d kernel: keep dropped stats in fq_codel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:25 +00:00
Felix Fietkau 967b13d79b kernel: tune fq_codel defaults for common netdevice speeds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:21 +00:00
Felix Fietkau 10e97fe11f kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-10 13:11:16 +00:00
Florian Fainelli f79b8bc0ec kernel: refresh patches against 3.9-rc6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 16:16:20 +00:00
Florian Fainelli 7251e4fdeb kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.

Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 16:16:16 +00:00
Florian Fainelli 5a27c63705 kernel: backport switch user API changes after r36283
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 15:47:01 +00:00
John Crispin 7b7317fc25 [ramips] unbreak portmapping - typo fix
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:39:01 +00:00
John Crispin ffaccbaa81 [ramips] move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:36 +00:00
John Crispin 77a28db429 [ramips] Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:33 +00:00
John Crispin e61b526322 [ramips] remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:28 +00:00
John Crispin 8fb3d4d8cf [ramips] add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:24 +00:00
John Crispin 6b65168cf8 [ramips] add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:20 +00:00
John Crispin 98f2fc0ea1 [ramips] set of_node before registring the switch
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:17 +00:00
John Crispin 3dc6fbf96d [swconfig] allow loading port maps from OF
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:09 +00:00
Steven Barth 4c9003ffc7 Adapt default network configuration for IPv6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
Gabor Juhos 42e7765d34 ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:17 +00:00
Gabor Juhos 3d035c5be5 ramips: rt3883: enable the AR8216 driver
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 12:34:15 +00:00
Gabor Juhos 67f2b85c8b ramips: add profile for the Omnima EMB-HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:04 +00:00
Gabor Juhos 409d825847 ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:03 +00:00
Gabor Juhos c9bcd064dd ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:02 +00:00
Gabor Juhos c0a94a3105 ramips: fix MDIO/PHY handling
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 11:12:01 +00:00
Gabor Juhos ed8fffd327 ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:51 +00:00
Gabor Juhos d515b9e7c7 ramips: avoid invalid pointer dereference in pinmux code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 08:24:50 +00:00
Gabor Juhos ee9470c508 ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08 07:11:35 +00:00
Gabor Juhos 04b9580dba ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:22 +00:00
Gabor Juhos 170c3c34d7 ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:21 +00:00
Gabor Juhos 9a5ee56a33 ramips: rt3883: enable PCI support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:20 +00:00
Gabor Juhos c797fdfb4d ramips: fix RT3883 PCI driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 20:56:18 +00:00
Gabor Juhos 2ea7a39705 ramips: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:05 +00:00
Gabor Juhos 95f88d23c0 ramips: add missing cpu-feature-override.h files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 17:05:04 +00:00
Gabor Juhos 24a761dac1 ramips: fix broken patch name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:26:27 +00:00
Gabor Juhos d16801822a ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 16:24:33 +00:00
Gabor Juhos 941539cb04 x86/generic: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:17 +00:00
Gabor Juhos b7a4639384 x86/generic: switch to 3.8
Only tested within a VM.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:15 +00:00
Gabor Juhos da00d19b24 x86/generic: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:13 +00:00
Gabor Juhos c2c4190a24 x86/alix2: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:11 +00:00
Gabor Juhos 9e8a9a0cc9 x86/alix2: switch to 3.8
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:09 +00:00
Gabor Juhos c62a2a7fb8 x86/alix2: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:08 +00:00
Gabor Juhos eb343829ba x86: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 15:53:05 +00:00
Gabor Juhos ae97f7ac24 ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:11 +00:00
Gabor Juhos ba1f5717e8 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:10 +00:00
Gabor Juhos c2751b8502 ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 14:46:09 +00:00
Gabor Juhos c79885c667 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:32:37 +00:00
Gabor Juhos 2ae68184a8 ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 13:25:38 +00:00
John Crispin 319f0d0a6e [ramips] fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:47:03 +00:00
John Crispin 695fe3d0ed [ramips] fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:46:54 +00:00
Gabor Juhos 00d4fe79c0 ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:37:15 +00:00
Felix Fietkau d9d6fd3f5d cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 11:24:30 +00:00
Gabor Juhos ec4901457c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-07 08:19:10 +00:00
Hauke Mehrtens 94d356b7e1 brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 22:22:26 +00:00
Hauke Mehrtens 825fbbb900 brcm47xx: fix error in board detection when nvram is not available.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 19:02:25 +00:00
Gabor Juhos 381a78c7e8 linux/3.8: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:03 +00:00
Gabor Juhos 9f4f28c91e linux/3.8: backport devm_ioremap_resource from 3.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:33:00 +00:00
Gabor Juhos 751af09d01 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:35 +00:00
Gabor Juhos 0a676cdd01 generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:19:31 +00:00
Gabor Juhos 37e86c353c generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 17:03:09 +00:00
Gabor Juhos c0a72756c4 linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:56:47 +00:00
Gabor Juhos 5eab2bb70b linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36226 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 16:38:36 +00:00
Gabor Juhos 4cd0e6b487 ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:40 +00:00
Gabor Juhos d4b5e559db ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:38 +00:00
Gabor Juhos 64dd914158 ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:37 +00:00
Gabor Juhos 4455e17963 generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:36 +00:00
Gabor Juhos d705fd0c51 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:34 +00:00
Gabor Juhos b2b815c577 generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:32 +00:00
Gabor Juhos 764f64149b ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 12:37:31 +00:00
John Crispin fa10e8a31a [ramips] fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:46:34 +00:00
Gabor Juhos 67dfec2fa8 kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:44 +00:00
Gabor Juhos 049b5f3748 refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06 11:40:41 +00:00
John Crispin 7870e47cc0 [ramips] fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:37:45 +00:00
John Crispin ed6c67ec18 [ramips] fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 23:10:42 +00:00
Florian Fainelli bc6e64b326 malta: add le64 and be64 sub targets
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:48 +00:00
Florian Fainelli 2fec7702df malta: move 32-bits options to subtarget config
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:45 +00:00
Florian Fainelli b88f444428 malta: move endianness kernel configuration to subtarget
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:41 +00:00
Florian Fainelli d32ac499b8 buildroot: factor knowledge of a 64bits architecture
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:19 +00:00
Florian Fainelli 070c70f3e0 malta: enable mips16 feature flag
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:16 +00:00
Florian Fainelli e861f11c45 buildroot: allow enabling MIPS16 user-space build
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05 12:36:12 +00:00
John Crispin 0f8a260d4b [lantiq] Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:07 +00:00
John Crispin f73f19c966 [lantiq] add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:01:03 +00:00
John Crispin c0d814a55f [kernel] Patch for invoking (pre)init
http://patchwork.openwrt.org/patch/3485/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:50 +00:00
John Crispin 381db32e2c [ramips] add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:21 +00:00
John Crispin 37b08bf005 [ramips] fix ALL5002 default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:16 +00:00
John Crispin 3e76a10173 [ramips] Build WW factory image for DAP-1350
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:12 +00:00
John Crispin 12e2a6d321 [ramips] add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:08 +00:00
John Crispin 6e4120f245 [ramips] add profile for the Edimax 3g-6200NL board
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:03 +00:00
John Crispin dfd8fe4f2d [ramips] there is no ttyS1 console
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:59 +00:00
John Crispin 209682186d [ramips] make v3.8 the default
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:55 +00:00
John Crispin 34e756e5c2 [ramips] add new image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:51 +00:00
John Crispin 8c64c84a1e [ramips] add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:46 +00:00
John Crispin e97253bd46 [ramips] fix upvel profile names
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:41 +00:00
John Crispin 485fd1d19a [ramips] fix rt3883 config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:37 +00:00
John Crispin 800132d77e [ramips] fix rt305x config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:33 +00:00
John Crispin 35a588e59e [ramips] mark rt288x broken until the test hardware arrives in the mail
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:16 +00:00
John Crispin 6bb6cbe600 [ramips] add patches for v3.8
Signed-off-by: John Crsipin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:10 +00:00
John Crispin cf9b57476d [ramips] remove old ralink 3.8 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:48 +00:00
John Crispin 84238ad24d [ramips] move files to files-3.7
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:44 +00:00
John Crispin fd1af44d07 [ramips] add feature gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:37 +00:00
John Crispin 927f4ae6ec [generic] add OF support to rtl8367b driver
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:33 +00:00
John Crispin 0f59629a24 [generic] make firmware loading work on v3.9
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:58:28 +00:00
Felix Fietkau 5bb74fd269 mpc85xx: enable ath9k and wpad-mini by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-01 09:53:29 +00:00
Hauke Mehrtens 349255c8d1 brcm47xx: generate images for Linksys E.... models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:51:28 +00:00
Hauke Mehrtens 816d91335b gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:48:07 +00:00
Hauke Mehrtens 400d0de831 brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:35:52 +00:00
Hauke Mehrtens 03e9d50168 brcm47xx: generate images for more WRT...N models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-27 15:34:55 +00:00
Imre Kaloz d1d59cf7e0 [gemini]: upgrade to 3.9-rc4, disable unsupported boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 14:18:32 +00:00
Imre Kaloz 88c5f2bfbd [generic/3.9]: refresh patches against -rc4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:48 +00:00
Imre Kaloz a95842d490 [generic/3.9]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 13:53:17 +00:00
Gabor Juhos 9dcc5a385b ar71xx: fix ethernet LEDs on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:03 +00:00
Gabor Juhos a7b9cbd468 ar71xx: add GPIO output select values for AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-25 06:40:00 +00:00
Gabor Juhos ec437235a4 ar71xx: add default LED configuration for the WL-WRD3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 21:07:21 +00:00
Gabor Juhos 63d557f83b ar71xx: fix USB power GPIO on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:47 +00:00
Gabor Juhos 8a0c278427 ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:45 +00:00
Gabor Juhos 30eb450d54 ar71xx: add diag support for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:43 +00:00
Gabor Juhos b039fcf6a6 ar71xx: add default switch configuration for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 19:23:36 +00:00
Hauke Mehrtens 9a587eb82e kernel: add missing config options for au1000 target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-24 14:01:38 +00:00
Hauke Mehrtens c697edaab2 kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:56:04 +00:00
Hauke Mehrtens da8dfca256 kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
This was turned from a silent confg option without a text to a normal 
config option which could be selected without any other option 
depending on this. This could cause the situation where REGMAP_SPI was 
selected without SPI_MASTER being selected.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-21 14:50:59 +00:00
Hauke Mehrtens 0314910b37 brcm47xx: generate images for some more devices
These devices should be supported by trunk now.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 22:01:18 +00:00
Hauke Mehrtens 0efdcebf5d kernel: add some fixes for kernel 3.9
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:59:24 +00:00
Hauke Mehrtens af64f497a3 kernel: add some missing config options for kernel 3.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-20 21:53:51 +00:00
Florian Fainelli 2b78201a90 kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-19 14:13:39 +00:00
Florian Fainelli 4f925948b1 uml: remove 3.6 kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:47:04 +00:00
Florian Fainelli ad8be074e3 uml: remove 3.3. kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:59 +00:00
Florian Fainelli bad07a0699 uml: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:54 +00:00
Florian Fainelli 6cc4256076 uml: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:49 +00:00
Florian Fainelli 2c39c0cdbd uml: remove 3.2 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:43 +00:00
Florian Fainelli 27513dcee7 ep93xx: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:37 +00:00
Florian Fainelli e4dd05ab0b kernel: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:32 +00:00
Florian Fainelli 92d396ae44 ep93xx: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:46:25 +00:00
Florian Fainelli 567013758d ep93xx: account for sound soc directory rename in 3.7
sound/soc/ep93xx -> sound/soc/cirrus

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:55 +00:00
Florian Fainelli d7bb11285d kernel: set regmap-core module license
Fixes the following issues:
[    7.660000] regmap_core: module license 'unspecified' taints kernel
[    7.690000] Disabling lock debugging due to kernel
[    7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[    7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[    7.720000] regmap_core: Unknown symbol devres_add (err 0
[    7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[    7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[    7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[    7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[    7.780000] regmap_core: Unknown symbol devres_free (err 0
[    7.800000] regmap_core: Unknown symbol devres_find (err 0
[    7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 19:45:48 +00:00
Florian Fainelli 365eb27ba4 au1000: remove support for 3.3. kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:47 +00:00
Florian Fainelli 45acb1fd6f au1000: switch to 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:41 +00:00
Florian Fainelli ac2749d0f0 au1000: keep the MTX-1 watchdog pin low during boot
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:36 +00:00
Florian Fainelli 34fe10e114 ep93xx: remove 3.3 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:23 +00:00
Florian Fainelli 0d1596f2c8 mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:18 +00:00
Florian Fainelli 513d4fc9c9 mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:13 +00:00
Florian Fainelli 66fd7561b3 mcs814x: remove PCI code
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:07 +00:00
Florian Fainelli 61de74b7f5 mcs814x: implement MULTI_IRQ_HANDLER
Allows us to get rid of the IRQ entry point assembly

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:47 +00:00
Florian Fainelli 4ac0d0408c mcs814x: use the standard device tree binding to represent a PHY node
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:41 +00:00
Gabor Juhos f6f637f2ed mpc85xx: add profile and build image for the TL-WDR4900 v1 board
Now that the ethernet switch is working, create firmware
images to make impatient users happy.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:11:45 +00:00
Gabor Juhos 562eca38dc generic: ar8216: start AR8327 switch from the probe routine
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:06:28 +00:00
Gabor Juhos 07e8f60ec8 generic: ar8216: add ar8xxx_start helper
Move switch starting code into a separate function.
This makes it usable from other places.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 16:06:25 +00:00
Gabor Juhos adb4109f8b mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:53:06 +00:00
Gabor Juhos bfcb790085 generic: ar8216: add OF configuration support for AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:08 +00:00
Gabor Juhos 74ed419c1c generic: ar8216: separate platform_data based AR8327 code
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36046 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:05 +00:00
Gabor Juhos 11d65c1f35 generic: ar8216: don't use platform_data in ar8327_init_port
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:02 +00:00
Gabor Juhos 74e5f4fdb1 generic: ar8216: move the ar8327_get_port_init_status function
It will be used in ar8327_probe routine.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:50:00 +00:00
Gabor Juhos 106519bdbb generic: ar8216: simplify and rename ar8327_config_port
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:49:57 +00:00
Gabor Juhos 0d8238f7b3 generic: ar8216: remove superfluous pdata checks
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 15:49:55 +00:00
Gabor Juhos 84da566873 kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:39:51 +00:00
Gabor Juhos 257aff3780 ar71xx: build images for the TL-MR11U v2
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]

Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:52 +00:00
Gabor Juhos 9f44658f89 ar71xx: rw2458n - Use eeprom (art) from wifi card
Use eeprom (art) from included wifi card, not hard coded in flash.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:50 +00:00
Gabor Juhos 7f077a5381 ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779

Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15 14:35:48 +00:00
John Crispin 762628c216 [lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:54 +00:00
John Crispin 6bead98ab0 [lantiq] fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:49 +00:00
John Crispin 8df178a888 [lantiq] select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:44 +00:00
John Crispin 3750d2ab0a [lantiq] fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:39 +00:00
John Crispin 1a11814aec [lantiq] build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:43:34 +00:00
John Crispin d5d3a4d87b [lantiq] bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:42:29 +00:00
John Crispin b9be683c5c [lantiq] move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 18:42:21 +00:00
Florian Fainelli ddc8718f7f kernel: add support for 3.9-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14 14:45:56 +00:00
John Crispin bbb2cf0b18 [base-files/generic] update the /init file to start /sbin/init
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13 18:11:13 +00:00
John Crispin dcb02ff080 [ar71xx] make sure the console works when using procd as our pid 1
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-13 18:11:00 +00:00
Gabor Juhos e3f013577e gemini: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:34 +00:00
Gabor Juhos 3529884ed4 gemini: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:33 +00:00
Gabor Juhos 28491651e5 gemini: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 18:22:22 +00:00
John Crispin 92c75fe5c3 [lantiq] fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:53:08 +00:00
John Crispin 0d45d11435 [lantiq] add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:54 +00:00
John Crispin c1d133c6d7 [lantiq] unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:47 +00:00
John Crispin 107efb4370 [ramips] make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:40 +00:00
John Crispin 2199cedcc0 [ar71xx] make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:52:33 +00:00
Gabor Juhos d441150960 avr32: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:33 +00:00
Gabor Juhos f725494cb9 avr32: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:32 +00:00
Gabor Juhos 59fb8414e3 avr32: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:31 +00:00
Gabor Juhos 34b8fc733e avr32: add sysupgrade support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:27 +00:00
Gabor Juhos 3d115adb28 avr32: add firmware partition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:23 +00:00
Gabor Juhos 5d2ba77663 avr32: add diag support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:21 +00:00
Gabor Juhos 80536ac2a5 avr32: create network config dynamically
The default network configuration from base-files
is not correct for the NGW100 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:19 +00:00
Gabor Juhos 4f7184970b avr32: built the firmware images from the lzma compressed uImage
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 13:28:16 +00:00
Gabor Juhos 389717fe06 mpc52xx: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:37 +00:00
Gabor Juhos 07038309f4 mpc52xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:36 +00:00
Gabor Juhos b8b2409436 mpc52xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12 07:18:34 +00:00
Gabor Juhos 90c84fd003 ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:45 +00:00
Gabor Juhos c40428c0f6 ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:43 +00:00
Gabor Juhos 1a059fb489 ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:40 +00:00
Gabor Juhos f31d10db47 ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 19:52:54 +00:00
Gabor Juhos 86e00f170d ar71xx: add AR934X_GPIO_FUNC_* defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 19:52:51 +00:00
Gabor Juhos 12ddae188d ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:25 +00:00
Gabor Juhos 5069d8687d ar71xx: add user-space support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:22 +00:00
Gabor Juhos 8824b6de38 ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:20 +00:00
Gabor Juhos 5cd81e4099 ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:19 +00:00
Gabor Juhos f052834441 ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:17 +00:00
Gabor Juhos dadf739365 ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:15 +00:00
Gabor Juhos edff64b8b3 ar71xx: add kernel support for dir-835-a1
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 15:55:13 +00:00
Felix Fietkau df755284d9 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 02:29:53 +00:00
Felix Fietkau 4b1c2fb15f cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 02:29:47 +00:00
Felix Fietkau dfe1972d62 cns3xxx: increase number of ethernet driver rx buffers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:32 +00:00
Felix Fietkau 1bb86e38d7 cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:28 +00:00
Felix Fietkau b019b3bb2f cns3xxx: minor ethernet driver cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 21:59:21 +00:00
Hauke Mehrtens 66227ce952 brcm47xx: refresh config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:42:26 +00:00
Hauke Mehrtens 5b4c3e8098 xburst: fix compilation: remove the __dev attributes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:26:28 +00:00
Hauke Mehrtens f32b22c8c9 kernel: add some missing config options found by the buildbot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 20:25:19 +00:00
Felix Fietkau f7b3da4d14 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:20 +00:00
Felix Fietkau 5dab5bf10c cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:16 +00:00
Felix Fietkau 275672c3c9 cns3xxx: fix ethernet driver memory barrier usage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:25:11 +00:00
Gabor Juhos 88643da3bf realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:06:31 +00:00
Gabor Juhos f4d5a1cba5 realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 18:06:29 +00:00
Felix Fietkau 3af0a3f4c6 kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 17:04:36 +00:00
Felix Fietkau 9695b598fb kernel: ensure that the arm exception handlers get preserved
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 17:04:31 +00:00
Felix Fietkau 5191a29832 kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 14:51:42 +00:00
Gabor Juhos b3bb99dc95 xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:54 +00:00
Gabor Juhos 3227cd693e xburst: switch to 3.8
Compile tested only, so add broken flag.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:52 +00:00
Gabor Juhos 3a8f81608f xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:50 +00:00
Gabor Juhos 8a147f2970 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:47 +00:00
Gabor Juhos 8fcf953db3 adm5120: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:46 +00:00
Gabor Juhos c824d4394f adm5120: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:45 +00:00
Gabor Juhos 5c0c067b0c malta: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:44 +00:00
Gabor Juhos 4323118453 malta: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:43 +00:00
Gabor Juhos ec4775a92f atheros: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:42 +00:00
Gabor Juhos 89cc1ba307 atheros: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:40 +00:00
Gabor Juhos fd2a497ea5 mpc83xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:39 +00:00
Gabor Juhos a39176728f mpc83xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:24:38 +00:00
Gabor Juhos 7ce9d7e1e9 rb532: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:40 +00:00
Gabor Juhos 68a2f6bc53 rb532: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:33 +00:00
Gabor Juhos 9d76137bf3 rb532: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 13:21:29 +00:00
Gabor Juhos 4f146674b1 ar71xx: correct board name to make LEDs work on RB750
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 07:20:57 +00:00
Gabor Juhos 697bc122f2 ppc40x: remove __dev_{in,ex}it annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 07:20:54 +00:00
Felix Fietkau 9ec6f799c1 cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:27:04 +00:00
Felix Fietkau f4caeaa7c6 cns3xxx: remove linux 3.3 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:01:55 +00:00
Felix Fietkau 74f0116420 cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-10 01:01:51 +00:00
Hauke Mehrtens bbcb144cde brcm47xx: add some more partition parser fixes by Rafał Miłecki
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:48:03 +00:00
Hauke Mehrtens a5d279ddec brcm47xx: netconfig: add bacis support for swconfig
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:24:43 +00:00
Felix Fietkau 76c2afef66 kernel: add a missing config symbol for 3.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 19:04:37 +00:00
Felix Fietkau 947ebaae8c cns3xxx: add linux 3.8 support and use it by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 18:51:46 +00:00
Felix Fietkau eda3f47aeb kernel: fix mpcore watchdog symbol export
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-09 18:51:39 +00:00
Gabor Juhos 24779214b3 cns21xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 16:08:41 +00:00
Gabor Juhos f131205460 cns21xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 16:08:39 +00:00
Gabor Juhos 073e25bfa6 ppc44x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:37 +00:00
Gabor Juhos f2d7f949f8 ppc44x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:35 +00:00
Gabor Juhos 31c6a7eaf5 ppc40x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:33 +00:00
Gabor Juhos 0d8c5ddc53 ppc40x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 15:16:32 +00:00
Florian Fainelli 02f4fc8b49 brcm63xx: fix LED names for various boards
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 13:42:35 +00:00
Gabor Juhos 7de535d0a3 ar71xx: add backported watchdog patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 12:08:28 +00:00
Gabor Juhos 0d7167f0db ar71xx: use backported QCA955x patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:15 +00:00
Gabor Juhos 8b0b9fe414 ar71xx: use backported PCI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:08 +00:00
Gabor Juhos 6ec2ddce1b ar71xx: use backported MISC IRQ patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:06 +00:00
Gabor Juhos 47d054b3d5 ar71xx: use backported GPIO patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:48:04 +00:00
Luka Perkov 29f41f3be0 ar71xx: enable building ramdisk images for WZRHPG30XNH board types
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 11:37:28 +00:00
Gabor Juhos 2a6ca56157 ar71xx: use backported SPI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:40:44 +00:00
Gabor Juhos a59e544adb mpc85xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:37:25 +00:00
Gabor Juhos 3bdef13fdb mpc85xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:37:24 +00:00
Gabor Juhos 02effaf2d6 ar71xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 09:03:50 +00:00
Gabor Juhos 2c47907975 ar71xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 08:47:38 +00:00
Gabor Juhos c5ba6a9391 kernel: update linux 3.8 to 3.8.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-04 08:43:55 +00:00
Luka Perkov f6a61008f2 ar71xx: rework changes from r35840
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 21:59:34 +00:00
Gabor Juhos f90fa7f4b4 kernel: update linux 3.8 to 3.8.1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:58:52 +00:00
Gabor Juhos 2d55cfeda8 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:58:10 +00:00
Gabor Juhos f4b2c62d60 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 13:57:40 +00:00
Gabor Juhos 3c9d4a38c1 ar71xx: update MAC address assignment for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:37 +00:00
Gabor Juhos 8be514f386 ar71xx: fixes leds for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:33 +00:00
Gabor Juhos ba05322e57 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:31 +00:00
Gabor Juhos 1720de2872 ramips: add user-space detection for ALL5002/ALL5003
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:28 +00:00
Gabor Juhos 6d4126a70e ramips: indicate support for ALL5003
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:25 +00:00
Gabor Juhos 80e2673444 ramips: enhance user-space board detection
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:02 +00:00
Gabor Juhos 2d8df9648d ramips: fix whitespace in /lib/ramips.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:46:08 +00:00
Felix Fietkau 3ca52e3ca4 Revert "[cns3xxx]: clean up PCI bus topology" (r35079)
It breaks PCIe IRQ mapping and possibly other things

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-02 00:32:54 +00:00
Luka Perkov 3fc6a70a19 ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-01 13:46:01 +00:00
Hauke Mehrtens f425635b16 brcm47xx: bgmac: omit the fcs
This fixes #13058 and hopefully #12927


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-28 13:27:21 +00:00
Hauke Mehrtens 131abb7401 brcm47xx: bgmac: update to version form netdev git repository
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-28 13:24:39 +00:00
Gabor Juhos 2a72ee4515 ramips: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 21:28:42 +00:00
Gabor Juhos 892a009121 ramips: image: don't break make process if mkimage command fails
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 21:28:40 +00:00
Gabor Juhos c27eec2666 ramips: remove port_power_off field from ehci_platform_data
It is removed in 3.8. Also add a revert patch for 3.7.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 21:28:38 +00:00
Gabor Juhos 22f01b88d1 ramips: remove __dev_{init,exit} annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 21:28:34 +00:00
Hauke Mehrtens 498da9e2eb brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 20:56:37 +00:00
Hauke Mehrtens 77b078cb09 brcm47xx: board detection WNDR3400v2
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".

CFE and NVRAM contain different vars - example:
CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0

Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)

Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> 


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 20:55:46 +00:00
Gabor Juhos bf3da89866 ar71xx: add profile and build image fot the TL-WA830RE v1 board
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.

Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 20:37:35 +00:00
Gabor Juhos 62b6477607 ar71xx: add model detection for the TL-WA830RE board
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 20:37:33 +00:00
Hauke Mehrtens 154a868b36 brcm47xx: use same board detection code as kernel 3.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24 18:10:42 +00:00
Gabor Juhos 21acabb63d adm5120: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24 18:08:14 +00:00
Gabor Juhos fc6e5812f4 adm5120: remove __dev{init,exit} annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-24 18:08:03 +00:00
Gabor Juhos 2a26c45c14 adm5120: remove a superfluous patch
The NO_IRQ symbol is not used by the amba core since
upstream commit:

  dfb85185bda373a70409c70c2632b02fb0f8f449
  AMBA: get rid of last two uses of NO_IRQ

  This gets rid of the last two users of NO_IRQ in AMBA primecell
  drivers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22 16:01:19 +00:00
Gabor Juhos d1746f1489 adm5120: avoid warning caused by wrong AMBA irq values
The amba core throws a warning if -1 is used as an
irq value since upstream commit:

  2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3
  ARM: amba: make use of -1 IRQs warn

  Make the core warn about the use of -1 (NO_IRQ)

Cange the value of the unused IRQs to zero for the
UART devices to get rid of the warning.

Based on #12729.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-22 16:01:17 +00:00
Gabor Juhos df96f7d546 cns21xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 20:45:24 +00:00
Gabor Juhos 626becacc2 mpc83xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 20:39:22 +00:00
Gabor Juhos 49ae189be3 ppc44x: add support for 3.8
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 19:23:31 +00:00
Gabor Juhos 809c94c024 ppc40x: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 19:23:29 +00:00
Gabor Juhos 17eba85440 mpc85xx: add user-space support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 19:20:34 +00:00
Gabor Juhos 70d3a2f640 mpc85xx: update 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 18:44:40 +00:00
Gabor Juhos 54b63b1428 ar71xx: fix MAC address assignment on the DIR-825-Bx boards
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 17:58:21 +00:00
Gabor Juhos ec7c7af141 mpc85xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 17:48:31 +00:00
Gabor Juhos 48222aa3da ar71xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 17:47:15 +00:00
Gabor Juhos 5d734cf6e9 atheros: add support for linux kernel v3.8
This builds and boots.

Because of the function pointer indirection (e.g. mtd_info's read
function pointer is assigned to spiflash_read), it is difficult for me
to understand where the calls are coming from (could be anywhere,
conditionally pointing at spiflash versions), so I punted and used the
renamed function pointers (_erase, _read, _write).  If someone knows
better what to do, please fix.

Cleaned up other sundry kernel tracking issues like get_phy_id and
__devinit,etc.

[juhosg: don't switch to that yet]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 17:45:54 +00:00
Gabor Juhos 09cf994598 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 16:52:34 +00:00
Jonas Gorski 396200a112 bcm63xx: Fix sysupgrade for tag-version 7 and 8
Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:41 +00:00
Jonas Gorski 45d8b5166b generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN
Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:38 +00:00
Jonas Gorski 1dc038ecb4 generic: b53: remove empty spaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:36 +00:00
Jonas Gorski db8c32d235 ramips: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:33 +00:00
Jonas Gorski c0aa3a9be3 cns21xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:31 +00:00
Jonas Gorski 40128d4c23 ar71xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:29 +00:00
Gabor Juhos 5e461e6e69 mpc85xx: add kmod-leds-gpio to the default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 10:26:03 +00:00
Gabor Juhos 16c4f3154c mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 10:26:00 +00:00
Hauke Mehrtens 9f5d8143f7 brcm47xx: do not use vlan0 any more.
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325.

This makes OpenWrt always use vlan1 and vlan2 instead.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-20 15:31:43 +00:00
Gabor Juhos 5e4f2cdfcc mpc85xx: add kernel support for the TL-WDR4900 v1 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-20 08:27:27 +00:00
Gabor Juhos 19ac2d8dbf mpc85xx: use a foreach loop to copy boot images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-20 08:27:26 +00:00
Gabor Juhos c02092f81e ar71xx: remove __dev{init,exit} annotations from kernel files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 20:52:06 +00:00
Gabor Juhos 91c3273df9 linux/3.8: add missing Kconfig symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 20:52:03 +00:00
Gabor Juhos 338436797b mpc85xx: add default profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 14:53:17 +00:00
Gabor Juhos 7393d7daa2 mpc85xx: add gpio-keys to OF match table
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 14:53:16 +00:00
Gabor Juhos 882214dd46 mpc85xx: enable squashfs feature
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 14:53:15 +00:00
Gabor Juhos 4800e6f07b mpc85xx: add swconfig to default packages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 14:53:12 +00:00
Gabor Juhos 6b04db4e87 kernel: update linux 3.8-rcX to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-19 09:17:38 +00:00
Florian Fainelli 44f3c0072d x86/rdc: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:38:05 +00:00
Florian Fainelli b5f329adde rb532: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:38:02 +00:00
Florian Fainelli 9c417101bb cobalt: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:37:58 +00:00
Florian Fainelli f81f68336c brcm63xx: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:37:55 +00:00
Florian Fainelli 3b1a2e5c15 au1000: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:37:52 +00:00
Florian Fainelli 2afebad8bb ar7: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 10:37:43 +00:00
Gabor Juhos 7b871a4b67 ramips: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:29 +00:00
Gabor Juhos 2227fb3c11 cns21xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:28 +00:00
Gabor Juhos a954352276 ar71xx: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:27 +00:00
Gabor Juhos d5e9696c49 adm5120: migrate to common led helper functions
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:26 +00:00
Gabor Juhos ca34712a7c kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 21:32:42 +00:00
Gabor Juhos 0b74564295 generic: ar8216: cleanup function/variable names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 12:48:25 +00:00
Gabor Juhos f7178a8d09 generic: ar8216: rename struct ar8216_priv to ar8xxx_priv
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 12:48:23 +00:00
Gabor Juhos 4633f1708b ar71xx: add user-space support for the Mikrotik RB951G board
[juhosg: change rb-951g to rb-951g-2hnd in the scripts]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 10:08:41 +00:00
Gabor Juhos 1faf7940dc ar71xx: add kernel support for the Mikrotik RB951G board
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17 10:08:35 +00:00
Hauke Mehrtens 9f9982c1f7 brcm47xx: add initial support for kernel 3.8
This contains the following new bigger changes:
 * new partition parser which still could lake some features or have bugs
 * new nand flash driver
 * using physmap-flash flash driver for parallel flash
 * some changes to the serial flash driver

With these changes OpenWrt starts using more of the mainline flash drivers.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 20:28:24 +00:00
Gabor Juhos 3becae3332 ar71xx: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 17:33:06 +00:00
Gabor Juhos a7a89f31c5 ramips: fix kmod-usb2 package name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 17:26:52 +00:00
Gabor Juhos 5766e4d223 mpc85xx: add input drivers to default packages, and load those during preinit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 17:13:38 +00:00
Hauke Mehrtens 34e24ed054 brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules
Adjust the "AutoLoad" number for the BGMAC module to be prior
to the switch modules.  This probably isn't real important as
the modules are loaded in the correct order by preinit anyway.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 16:27:33 +00:00
Hauke Mehrtens 0a8f960f87 brcm47xx: improve cpuport detection for filesafe
Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X
Ask the switch driver where the CPU port is.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 16:24:15 +00:00
Hauke Mehrtens 28fd5cda23 brcm47xx: fix network config on simpleshare
The included patch will generate a correct network configuration on the simpletech simpleshare.

Thank you for the patch Will Holmes (RealOpty)

This closes #12361.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 15:24:48 +00:00
Hauke Mehrtens bf71e22b98 brcm47xx: handle return values of cfe_env_get() correctly.
This closes #12746.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 15:19:24 +00:00
Hauke Mehrtens 836f308687 brcm47xx: bgmac: fix unaligned accesses to network headers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 14:38:17 +00:00
Hauke Mehrtens 2a28660d30 brcm47xx: fix unaligned access to mac address
The mac address should be aligned to u16 to prevent an unaligned access
in drivers/ssb/pci.c where it is casted to __be16.

This closes #9824.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 13:46:00 +00:00
Hauke Mehrtens 117f7697ec brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0.
This should fix #13000.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16 12:37:24 +00:00