d572e1483f
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
62d8c17df5
ramips: register ethernet device on the RT-N15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:46 +00:00
5c7c1c3dba
ramips: add generic ethernet device for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:43 +00:00
69e79c381f
ramips: add mdio_cfg configuration for the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:40 +00:00
5cce2b0a05
ramips: Fix bridging in ramips ethernet driver
...
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.
The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.
Fix this by using skb_put to correctly set skb->len and skb->tail.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:07 +00:00
33eba7e060
ramips: protect GPIO register access with a spinlock
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:04 +00:00
c463512391
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31 11:57:32 +00:00
464c781c2b
ramips: merge slab patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:28 +00:00
5430b616f4
ramips: use COMMAND_LINE_SIZE directly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:24 +00:00
0baf6687af
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 09:25:37 +00:00
0b03ed8938
ramips: annotate device register function prototypes with __init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:28 +00:00
21a793245c
ramips: register wifi device for the RT2880 based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:23 +00:00
d06a46616e
ramips: add wifi device for the RT2880 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:20 +00:00
7e95b7a597
ramips: register wifi device on the rt305x based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:10 +00:00
b58b53b236
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 12:04:05 +00:00
cfafa18012
[ramips] Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 10:06:05 +00:00
7b441cdc46
ramips_eth: cleanup mac_address changing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:36 +00:00
f549d2c926
ramips_eth: update register offsets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:33 +00:00
a6165a962c
ramips_eth: pass sys_clk via platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:30 +00:00
a0de90ddb3
ramips_eth: add helper functions to {ed,dis}able interrupts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:53 +00:00
162e987f39
ramips_eth: remove unnecessary typecasts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:51 +00:00
b84db9ddc3
ramips_eth: simplify tx_next computation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:48 +00:00
150f80a0ed
ramips_eth: simplify tx descriptor initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:46 +00:00
6a51bbb104
ramips_eth: pass 'raeth_priv' struct directly to dma specific functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:43 +00:00
58e0c44256
ramips_eth: convert to use netdev_ops
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 12:48:38 +00:00
bf61c26b5f
ramips_eth: fix invalid register writes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:26:02 +00:00
8f1e2c9fdc
ramips_eth: move memset call out from the loop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:59 +00:00
aed7757589
ramips_eth: header file cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:57 +00:00
2f687349c6
ramips_eth: coding style cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:55 +00:00
64604acf17
ramips: register gpio buttons on the Fonera 2.0N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:52 +00:00
5bf32a94ca
ramips: register gpio buttons on the WHR-G300N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:49 +00:00
c5436e9b6d
ramips: register gpio buttons on the V22RW-2x2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:47 +00:00
d6e8454581
ramips: register gpio buttons on the DIR-300 revB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:44 +00:00
af219a1496
ramips: fix wrong base addresses for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:41 +00:00
76a944fdca
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:36 +00:00
0114fbb17b
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:33 +00:00
3ee7842268
ramips: cleanup WZR-AGL300NH board support file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:29 +00:00
6081d8167f
ramips: register gpio-buttons on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:25 +00:00
70c02eb229
ramips: add common gpio-buttons device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:20 +00:00
055f8363db
ramips: register rtl8366s device on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:16 +00:00
7a147bbabd
ramips: sanitize return value of ramips_gpio_get
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:08 +00:00
9f3818d5e0
ramips: update mips multi-machine stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:03 +00:00
ab82f72a29
[ramips] add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-24 23:31:49 +00:00
2cf10bd0e6
ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 15:15:41 +00:00
78fb561524
[ramips] missing header file changes, and fix mtu value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 09:18:40 +00:00
99e448a10a
[ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 21:08:11 +00:00
100904760d
[ramips] hopefully fixes dma issues seen on ethernet driver when under high load
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 12:51:45 +00:00
763125a873
ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:51 +00:00
1ec1193c4f
ramips: use definitions from rt305x_regs, and nuke the duplicated ones
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:48 +00:00
888efa12d8
ramips: move ramips_eth_platform_data into a separate file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26 17:17:45 +00:00
Gabor Juhos
John Crispin
Jo-Philipp Wich