If a user invoked /sbin/ifup to bring up an interface, the setup used to fail
in case of wireless networks tied to a non-bridged interface definition.
Likewise, the bringup of "lan" in the default configuration will reinitialize
the bridge but do not re-join the wireless network to it, requiring an extra
call to /sbin/wifi (which might not be possible anymore due to a severed link
if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27720 3c298f89-4303-0410-b956-a3cf2f4a3e73
- option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz
- option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz
This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan.
Fixes ticket #8699.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27653 3c298f89-4303-0410-b956-a3cf2f4a3e73
Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930 3c298f89-4303-0410-b956-a3cf2f4a3e73
when using an external toolchain the base-files package copies libc, libgcc and
others from the library directory.
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
--- Message Snippet ---
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libnss_files.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv-*.so': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libuClibc.so.*': No such file or directory
make[2]: *** [/home/user/Desktop/code/meetwise/openwrt/bin/at91/packages/libc_-68_at91.ipk] Error 1
make[2]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt/package/base-files'
make[1]: *** [package/base-files/compile] Error 2
make[1]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt'
make: *** [package/base-files/compile] Error 2
--- /Message Snippet/ ---
To fix this unwanted behaviour I added an extra 'exit 0' to each for-loop and
make ignores non-existing files as before.
Signed-off-by: Sven Bachmann <dev@mcbachmann.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26623 3c298f89-4303-0410-b956-a3cf2f4a3e73
saves a few kb and gets rid of unused not exported functions as well
should also improve the reliability of mklibs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25800 3c298f89-4303-0410-b956-a3cf2f4a3e73
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25548 3c298f89-4303-0410-b956-a3cf2f4a3e73
- add sysupgrade support for keepfile hints
* introduces /lib/upgrade/keep.d/ for per-package keepfile lists
* introduces /etc/sysupgrade.conf for user defined keepfile hints
- prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg
- change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and
opkg list-changed-conffiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23258 3c298f89-4303-0410-b956-a3cf2f4a3e73
The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses
udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the
cached state vars and query uci directly to make the script immune against unwanted runtime changes.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23211 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes a bug where lists end up with duplicate values if config_load was
invoked multiple times.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22629 3c298f89-4303-0410-b956-a3cf2f4a3e73
Jo-Philipp Wich
Felix Fietkau
Hamish Guthrie
Gabor Juhos
Daniel Dickinson
Florian Fainelli