Commit Graph

9 Commits (44d3138add811ec32b875e866f3053a3203c4a22)

Author SHA1 Message Date
Jonas Gorski e5910acf7f brcm63xx: 3.10: backport multi-board support
There have been no reported regressions, so backport it to 3.10.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-30 13:34:37 +00:00
Jonas Gorski b7d8aef0ac brcm63xx: CPVA502+ board fixes
Some fixes for Telsey CPVA502+ bcm6348 routers:
- reset the external PHY (eth1) with proper platform code, not using a led definiton
- eth1 is an external phy, not a switch, deleted forced link speed
- fixed led color

Patch made for 3.14 kernel patches.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: also fix 3.14, refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-30 13:34:28 +00:00
Jonas Gorski d6204583f4 brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-22 11:16:52 +00:00
Jonas Gorski 7b6a9cdb85 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-19 13:46:25 +00:00
Florian Fainelli 07eb492643 brcm63xx: do not add twice the same field to board
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-16 00:45:19 +00:00
Florian Fainelli 91594d2f84 brcm63xx: add USB support to BCM6318
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-15 19:05:57 +00:00
Florian Fainelli 55ee2d5854 brcm63xx: fix BCM96318MVWG LEDs
Power LED is not active low, and ppp-fail is red, not green.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-15 00:06:08 +00:00
Florian Fainelli 1b2c77588b brcm63xx: 96368MVWG supports USB gadget, enable it
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-14 23:56:46 +00:00
Jonas Gorski 2f038ae881 brcm63xx: add linux 3.10 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-20 11:30:26 +00:00