a389dafc9a
[sparc] resync kernel configuration with 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:39 +00:00
ff82f93a24
[sparc] build root filesystems and install them in $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:36 +00:00
141f8f453d
[kernel] do not build crashlog on sparc too
...
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:33 +00:00
f41d3cd6be
[uml] switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:29 +00:00
9f1aa6fea4
[uml] add support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:26 +00:00
ae2cf98d8d
[ar7] move acx-mac80211 to the ar7 generic target
...
None of the AC49x boards that we support actually have Wi-Fi.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:55 +00:00
60412980c1
[kernel] 3.6: add some framebuffer related config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:51 +00:00
0d53fbfd15
[ar7] push atm, br2684ctl and kmod-pppoa down the DSL Profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:48 +00:00
7ff2c6b0f6
brcm47xx: revert r33935: check for .ELF header in partition parser
...
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420 .
With the patch the linux partition also contained the loader which is in the first 128KB.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-15 16:39:45 +00:00
e16546fc1f
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-14 14:18:33 +00:00
25d790021b
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:19 +00:00
588d32a4c5
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:18 +00:00
9b40fe6ffc
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:17 +00:00
1a6d0dbc95
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:15 +00:00
f1d93b0419
generic: refresh 3.6 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:13 +00:00
a28b70572f
[malta] fix badly named patch file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:39:44 +00:00
78c84858da
[malta] switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:20:19 +00:00
ae8b3d1648
[malta] fix CBUS UART registration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:20:14 +00:00
776d3f73f0
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:03 +00:00
4c0d33f7dd
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:01 +00:00
8077760419
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:00 +00:00
60091b17d1
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:47:58 +00:00
1d0ec1e960
[lantiq] fixes ar9 / dgn3500 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 08:54:14 +00:00
d8bd9f9b15
[ramips] previous commit pushed 1 file too many ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:36:23 +00:00
043881f47f
[ramips] move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:35:01 +00:00
49f169f67f
brcm47xx: remove double definition of kmod-tg3 added in r34150
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:34:00 +00:00
4e9fb7e774
brcm47xx: fix cfe config detection on WGT634U broken in r33920
...
Thanks Russell Senior for reporting this.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:32:33 +00:00
3bd54a7888
cns3xxx: merge gpio patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 19:27:30 +00:00
d9e7b083bb
cns3xxx: fix build failure after r34168
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 19:27:29 +00:00
b070d71880
[kernel] MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
...
And get rid of the AR7 patch because at least the Alchemy SoC also needs it
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 12:49:47 +00:00
29fb5ae792
[cns3xxx]: reorder, rename and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 09:18:00 +00:00
7a955260a6
[cns3xxx]: split spi patch, follow mainline file naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 08:22:14 +00:00
cba5b86e13
[cns3xxx]: split the i2c patch, merge the retry fixup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 08:21:38 +00:00
f0675c7cae
[atheros] move redboot boardconfig patch into target folder
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 07:56:37 +00:00
505a81f173
[ixp4xx:] add support for the Tonze AP-422/425
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 21:04:30 +00:00
a20b4c6242
refresh patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 21:03:52 +00:00
e3e30fcfb6
[cns3xxx]: generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:57:04 +00:00
37b69da0ca
cns3xxx: convert dwc_otg patches to files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:58 +00:00
80a28570bd
cns3xxx: convert ethernet patches to files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:56 +00:00
76d85346b0
bcm63xx: switch to 3.6.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:57:17 +00:00
202626daa1
[ixp4xx]: move fixed mapping of internal devices into vmalloc region
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:29:27 +00:00
ddf27142f4
[au1000] advertise squashfs feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:54 +00:00
8a9badd8a3
[au1000] add support for Linux 3.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:50 +00:00
1ff596e058
[au1000] split kernel config between generic, au1500 and au1550
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:44 +00:00
dbaa47e43b
[ar7] add support for Linux 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:41:09 +00:00
30b73257e7
[ar7] move files directory to files-3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:40:48 +00:00
c5f6531ab2
brcm47xx: remove ssb-gige package
...
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 17:30:33 +00:00
697dd7d82f
[ar7] generate image for AC49x
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:39 +00:00
2e8c9209e9
[ar7] create AC49x subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:34 +00:00
ce15640628
[ar7] create generic subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:29 +00:00
b1482bba00
[ar7] detect AC49x flash partitions
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:22 +00:00
f8cd51f497
[ar7] support AC49x bootloader environment
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:14 +00:00
aafaeed5d5
[ar7] add AudioCodes AC49x platform support to kernel
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:09 +00:00
575fa64966
[ar7] free memory below kernel offset
...
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:00 +00:00
f0bff1a81a
x86/generic: don't disable usbfs ( #12452 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 23:28:58 +00:00
851e20d9e4
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 22:10:47 +00:00
d3d1f114b4
bcm63xx: add two missing usb patches to 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:16 +00:00
bf619e597c
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:07 +00:00
4c2e3be25a
cns3xxx: clean up pcie patches
...
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 21:37:54 +00:00
5c300b9f41
[lantiq] add more profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:58 +00:00
3a08b05184
[lantiq] a few more dts files (WIP)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:43 +00:00
c27f32609a
[lantiq] add mtd split and atm patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:30 +00:00
114523d5b7
x86: use $(strip) for the at_keyboard check
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:53:36 +00:00
ce5e0d1df8
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:19:51 +00:00
703033b343
generic: sanitize deps_initramfs list
...
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 09:07:29 +00:00
1a18927dcf
cns3xxx: exit from laguna late_initcall if not running on laguna board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 11:31:56 +00:00
2a19fe9d2f
cns3xxx: add PPS support for laguna
...
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:42:31 +00:00
72ece984b9
[cns3xxx]: fixup symbol selection
...
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:40:34 +00:00
7afe9fb306
cns3xxx: fix coding style in board script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 23:12:06 +00:00
12d41e1668
[ramips] adds fon20n profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:31 +00:00
f06334f812
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:21 +00:00
30627c7870
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:04 +00:00
532c332441
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:55 +00:00
8b5e21cf9c
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:34 +00:00
704a78d6b6
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 09:01:03 +00:00
f1302ff02d
[ixp4xx]: fixup typos in the compex patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 07:51:24 +00:00
b8e5c3fb59
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 15:21:46 +00:00
9f5fd7db54
cns3xxx: refresh kernel config file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:43 +00:00
5fabd70da1
cns3xxx: use files directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:41 +00:00
ce0ec8cf6f
[lantiq] add OWRTDTB marker patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 10:39:43 +00:00
8dd03e55f9
[lantiq] add support for arv7525
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 07:38:24 +00:00
fee2c93362
[cns3xxx]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:45:12 +00:00
3cc763aa54
[cns3xxx]: add default packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:39:08 +00:00
06f3165bc2
linux: generic: fix split_squashfs for 3.6
...
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 00:48:21 +00:00
3590dfe2a4
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 22:50:29 +00:00
ed27b638cd
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:28 +00:00
63a2533400
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:27 +00:00
d7e7749443
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:22:09 +00:00
7cb435123c
[ixp4xx]: use the mainline machname for the compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:38:23 +00:00
1302d425cb
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:45 +00:00
57d2dcb6a0
linux/3.3: backport an upstream GPIO patch
...
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:43 +00:00
802d3dc718
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 06:58:53 +00:00
90c05775ac
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 22:08:54 +00:00
82f7bd78ce
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 21:12:20 +00:00
dd77aab2d5
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 20:15:18 +00:00
68c575d5a9
linux-3.6: fix portability of some includes files in tools/ used on the host
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 17:01:15 +00:00
434f5edbf7
[lantiq] 3.6 is not the default yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-03 13:29:44 +00:00
403bf784c9
[lantiq] adds dts files and make devicetree images buildable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:47 +00:00
2b11c5869f
[lantiq] update ase target for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:41 +00:00
613f20baba
[lantiq] add subtarget, as of 3.6 we dont seperate xway SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:36 +00:00
3c3f1ddfbd
[lantiq] adds 3.6 files, patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:26 +00:00
5a5e4b2782
[lantiq] move files/ -> files-3.3/
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:02 +00:00
bd7dc4e3ea
[lantiq] prepare Makefile for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:06:51 +00:00
ba0ed558ae
generic: make yaffs work on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-01 11:07:23 +00:00
9279cff99c
generic: rename jffs2 patches
...
Make room for the upcoming yaffs patches.
No functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-01 11:07:16 +00:00
8fda8ed025
generic: use mtd_* helpers in the yaffs code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34046 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 21:17:30 +00:00
8cb200c475
[cns3xxx]: move PCIe init to subsys init call
...
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug. I have modeled the cns3xxx PCIe init after
other ARM platforms. Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.
Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 20:16:53 +00:00
5abc89f037
kernel: update linux 3.6 to 3.6.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 20:09:39 +00:00
5e9e20bc4f
generic: split yaffs-3.2-fix patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 19:33:12 +00:00
af243e70af
generic: replace yaffs-2.6.39 patch
...
Use backported upstream patches instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 15:12:45 +00:00
2400c2b7f7
generic: replace yaffs mutex_fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:24 +00:00
ce71eb1f6e
generic: replace yaffs symlink fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:23 +00:00
0461aab56a
generic: rename yaffs patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:21 +00:00
d4cfa7ddca
[realview] set earlyprintk UART to be the default Realview UART
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 16:56:10 +00:00
e3f12313fe
generic: fold yaffs_git_2010_10_20 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 14:58:17 +00:00
029a10f4cb
generic: fold yaffs_cvs_2009_04_24 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 14:58:13 +00:00
d2c33eba70
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 17:24:30 +00:00
e036077e9e
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 10:11:05 +00:00
dc8d837bab
add missing 3.6 symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 10:00:02 +00:00
3d12aaad33
[orion]: the uImage's filename will hardly change
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 09:55:20 +00:00
32c84b93c1
generic: add more symbols for 3.6
...
Also refresh the config file with kconfig.pl.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 09:08:59 +00:00
a8ec452c60
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 19:52:02 +00:00
b783fb21a5
kernel: update linux 3.6 to 3.6.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 18:59:39 +00:00
1517cc75d2
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 12:21:15 +00:00
7a14817d2d
generic: fix crashlog patch for 3.6
...
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 09:50:50 +00:00
4f3acd22a4
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 17:11:06 +00:00
bb2a90b763
generic: fix tcp_window_check patch for 3.6
...
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:
[ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[ 7.680000] Call Trace:
[ 7.680000] [<80273bc4>] dump_stack+0x8/0x34
[ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[ 7.710000]
[ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[ 7.720000] nf_conntrack_ipv4: can't register pernet ops
[ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 15:42:25 +00:00
de2b6820de
[generic]: instead of updating the whole file, just add the additional boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 13:29:36 +00:00
52b8424c48
[orion]: rename erase size variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:50:55 +00:00
fdb45e8803
[orion]: add support for Netgear WN802T
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:48:22 +00:00
61756f89b8
[orion]: don't enforce rootfs location
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:43:47 +00:00
e57364c03e
[brcm47xx]: generate images for the D-Link DWL-3150 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 09:42:58 +00:00
e737bdee77
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:42 +00:00
0011f2872a
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:40 +00:00
a08582ccd1
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:39 +00:00
b84f40ff4a
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:38 +00:00
7a1382cd1d
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:37 +00:00
cdeefe000e
generic: allow to disable [25]GHz support in ath9k via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:36 +00:00
d88a6ff008
generic: use mtd_read in myloader parser
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:59 +00:00
c2e77b8ab2
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:58 +00:00
71b8bf1a54
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:57 +00:00
68bb4e22cc
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:55 +00:00
0cbec5aa1e
generic: swconfig: use led_set_brightness in LED control code
...
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:18 +00:00
32d786c526
generic: add missing symbols for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:15 +00:00
a65df2f1ec
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:13 +00:00
368d37f9ad
ramips: use correct key code for the RFKILL switch on the TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:53:44 +00:00
1f1714d628
[malta] add 3.6 kernel configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 15:24:19 +00:00
273606b85c
[brcm63xx] add missing 6345 clock bits patch to 3.6 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 15:24:14 +00:00
2e2b5e910a
[kernel] add some more 3.6 config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 15:24:10 +00:00
33d52fa247
[brcm63xx] add preliminary support for 3.6 kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 21:16:51 +00:00
4d69d9733e
brcm47xx: check for .ELF header in partition parser
...
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.
This closes #11420
Thank you b.sander for the patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 19:49:20 +00:00
ad6708c17b
kernel: add PCI id 14e4:4350 to ssb
...
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 15:50:47 +00:00
37b928c2c8
kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 15:11:45 +00:00
bd9b9ef3d1
kernel: refresh config files using kconfig.pl
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 15:11:40 +00:00
183c8129ef
kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
...
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 14:33:47 +00:00
0beb881c37
[brcm63xx] fix Ethernet DMA for 636x and 6328 after r33916
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-25 11:54:41 +00:00
5e449cd3cd
[brcm63xx] add support for the Dynalink RTA770BW board
...
This board id is used by the Siemens Gigaset SE515 router.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 21:25:22 +00:00
488bcf3630
[brcm63xx] make BCM6345 Ethernet DMA changes runtime checks
...
The semantics of the DMA engine are identical, we just have a couple of
special case handling.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 21:25:10 +00:00
c7f277a21e
[kernel] ARM: fix XZ decompressor stub build failure on strstr()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 15:57:31 +00:00
9a5ebab4f6
[kernel] fixup generic 3.6 kernel config
...
It was not meant to be committed as-is in r33911
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 15:57:24 +00:00
b7494455f2
[kernel] fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set
...
This issue got introduced while porting the patch over 3.6 in r33897
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 13:23:20 +00:00
dcde44e37e
[kernel] make all 3.6 patches apply and build
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 13:05:22 +00:00
835d9c9a76
[kernel] swconfig: get rid of the NLA_PUT_* macros
...
Upstream kernel 3.6 has removed this usage, use the plain functions directly as
intended.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-24 13:05:04 +00:00
d9abff3fe7
x86: allow both old and new grub signatures in sysupgrade
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 16:34:00 +00:00
648f1d0171
[generic]: linux 3.6 support (work in progress)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 12:21:34 +00:00
35c7b0ba8a
kernel: move the bcma fallback sprom fix to generic
...
bcm63xx needs the bcma fallback sprom fix, too.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 10:57:49 +00:00
fb185fea7d
[bcm63xx] add support for Comtrend AR5381u.
...
Router: Comtrend AR5381u.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 10:57:47 +00:00
f237863aec
[bcm63xx] add support for Comtrend AR5387un.
...
Router: Comtrend AR5387un.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 10:57:44 +00:00
866fede672
[bcm63xx] add support for HomeStation ADB P.DG A4001N.
...
Router: HomeStation ADB P.DG A4001N.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 10:57:39 +00:00
fb421cd989
x86: correct image magic for grub2 images
...
Sysupgrade broke on x86 when grub2 superceded grub. This patch
corrects tha magic_word to be expected in grub2 combined images.
Signed-off-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-22 16:06:29 +00:00
d15ab9c36e
[brcm63xx] add back support for BCM6345 Ethernet DMA engine
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-22 12:57:22 +00:00
0c24df64af
[brcm63xx] fix clocks bits for BCM6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-22 12:57:14 +00:00
18fe6ccc9f
[kernel] refresh 3.3 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-21 21:30:30 +00:00
fa767eb829
[bcm63xx] Add F@ST2604 board support.
...
Add Sagem F@ST2604 board support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-21 14:35:06 +00:00
20a0a23021
ar71xx: rw2458n - fix flash parts
...
See #12338 . Redwave rw2458 has uboot, not redboot.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19 18:32:49 +00:00
8b55cd7c61
ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19 17:42:22 +00:00
0e55c42c42
ramips: add profile and build image for the TEW-691GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:13 +00:00
4876d39479
ramips: add user-space support for TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:12 +00:00
7506f3054c
ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:11 +00:00
81787ca9d7
ramips: add profile and build image for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:10 +00:00
70f4ccf424
ramips: add user-space support for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:07 +00:00
66b4211a57
ramips: rt3883: add initial support for TRENDnet TEW-692GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:06 +00:00
ef1b9efe29
ramips: add profile and build image for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:04 +00:00
a876a2fff5
ramips: add user space support for the DIR-645
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:03 +00:00
06c0cd5823
ramips: rt3883: add inital support for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:02 +00:00
888f80c6f9
ramips: use get_magic_long in sysupgrade image check
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:23:00 +00:00
3f74a4920a
generic: add driver for the the RTL8367R{B,-VB} switches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18 07:22:56 +00:00
0520369d5f
ixp4xx: add sysupgrade support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/ixp4xx/base-files/lib/ixp4xx.sh | 25 ++
target/linux/ixp4xx/base-files/lib/upgrade/platform.sh | 156 +++++++++++++++++
target/linux/ixp4xx/image/Makefile | 11 +
3 files changed, 192 insertions(+)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 22:03:46 +00:00
047aa0a7c5
cns3xxx: update FIQ header file and disable RWFO
...
Update header file appropriately and disable read for ownership
Note that the FIQ support implements a workaround that provides a performance
boost over the traditional upstream workaround which ensures cache lines
are exclusive on driver CPU using 'read for ownership'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/config-3.3 | 2 +-
target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch | 9 ++++-----
2 files changed, 5 insertions(+), 6 deletions(-)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 22:03:37 +00:00
fb47a917c2
drop GPIODEV platform code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 21:53:37 +00:00
e815a0702a
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:50 +00:00
4827530f6e
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:48 +00:00
991bc12eb0
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:47 +00:00
5e39bae8bd
ar71xx: add a helper function for setting up ETH_CFG register on AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 18:27:45 +00:00
6b329c076f
ar71xx: OM2P-HS sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 08:26:05 +00:00
868a0c9780
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-17 08:26:01 +00:00
e910e78dba
[mcs814x] nuport-mac: various fixes
...
- properly check for the link up condition in the phylib adjust callback
- do not assign skb->dev, eth_type_trans() already does it
- handle skb allocation failures in the refill path
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-15 21:03:57 +00:00
86148ac69b
[x86] merge the RDC R-321x target as a subtarget of x86
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-15 18:54:34 +00:00
012639a111
ar71xx: fix sysupgrade for jjPlus JWAP003
...
[juhosg: change commit message]
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:26 +00:00
284b606488
ar71xx: ew-dorin: added ethernet switch configuration
...
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33768 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:25 +00:00
93d22ab55b
ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
...
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.
[juhosg: fix OpenMesh template instead of use of string substitution]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-14 16:24:22 +00:00
f558f58838
[ar7] add Actiontec PK5000 LEDs
...
Also share them between the GT701 and the PK5000.
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:45 +00:00
39bcd5e10b
[ar7] vlynq: rework probing and clocking setup
...
Handle the different vlynq device versions, and make the vlynq code more
in line with the original vlynq implementation.
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:36 +00:00
73a2034c15
[ar7] remove the squashfs alignement define
...
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:30 +00:00
8133e7c362
[ar7] handle LOADER_MAGIC2 in ar7part
...
This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:25 +00:00
f583005b1d
[ar7] increase the flash resource size to its maximum value
...
CFI detection will reduce the resource size to its real value.
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:20 +00:00
10b7a94f54
[ar7] reinstate the fixed PHY fallback for devices with undetectable switches
...
At least devices without a switch present on the MDIO bus still get a valid
link and work as expected (such as the Linksys WAG54Gv2).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:14 +00:00
3c152a71e6
[ar7] enable mvswitch driver
...
And fix the default network configuration to create the required VLANs.
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:09 +00:00
e87f778937
[ar7] use the second available LED to encore mode boot states
...
Patch from Daniel Gimpelevich.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:47:04 +00:00
0e90be58e4
[ar7] use wpad-mini instead of hostapd
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 17:46:32 +00:00
186a78c8f4
[generic]: add support for new Option modules (GTM66xxWFS/GTM67xxWFS)
...
Add new device ID's for the hso driver as well as usb storage
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-13 06:58:42 +00:00
e61520a37c
x86/kvm_guest: enable PCIE support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33741 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-12 16:51:31 +00:00
4f74b04fbb
[ar7] copy initramfs kernel to bin directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 15:45:24 +00:00
44090b37e4
[kernel] gpiodev/gpioctl RIP
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 11:58:09 +00:00
1babf05104
[cns3xxx]: fix (really this time) laguna UART config
...
Properly terminate the correct platform resource for laguna UARTs
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 09:51:35 +00:00
7deca64a98
The Gateworks System Controller (GSC) is an i2c device that provides system
...
level monitoring and control of Gateworks boards. It is used on several
product families spanning several different target architectures (ixp4xx,
cns3xxx, davinci).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 07:59:06 +00:00
3965e8fe36
[cns3xxx]: fix non terminated uart resources for laguna
...
Resolves crashes when probing multiple serial devices
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 07:47:27 +00:00
f1b30c6b89
[ar7] generate vmlinux.srec and vmlinux.bin from srec2bin
...
Useful for loading the kernel into RAM using ADAM2/PSPBoot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 06:45:07 +00:00
41d09b7d78
kernel: fq_codel: dont reinit flow state
...
Keep fq_codel flow state around after queue empty.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:54:31 +00:00
be0d248fac
kernel: dont delay acks after ECN CE
...
Bugfix from linux head - don't delay acks from ECN congestion
experienced in some situations.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:54:27 +00:00
f89ae950b0
cns3xxx: Fix GPIO configuration for Gateworks Laguna boards
...
The Laguna boards do not use all the same pins for SDHCI as the Cavium
reference board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:39:02 +00:00
ec94f89147
cns3xxx: Fix laguna arm11mpcore watchdog
...
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where
all mpcore-wdt boards point the driver base too. I believe this is wrong
because 0x600 is aliased to the timer/watchdog of the 'current CPU' where
0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus
if your timer/watchdog application is switching between CPU's it can end up
writing to the wrong CPU's registers which results in random board resets
from watchdog timeouts etc.
This patch forces the timer/watchdog driver to use CPU0's registers always.
Its my opinion that other mpcore-wdt boards should be doing the same thing.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:38:58 +00:00
0d705f9422
mtd: allow partial block unlock
...
This allows sysupgrade for devices such as the Gateworks Avila/Cambria
product families based on the ixp4xx using the redboot bootloader with
combined FIS directory and RedBoot config partitions on larger FLASH
devices with larger eraseblocks.
This second iteration of this patch addresses previous issues:
- whitespace breakage fixed
- unlock in all scenarios
- simplification and fix logic bug
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:38:44 +00:00
f35f0355ab
ixp4xx: enable OPTIMIZE_FOR_SIZE
...
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 11:38:28 +00:00
c43d07561e
ixp4xx: add missing reboot handlers ( fixes #11577 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-09 15:38:55 +00:00
065c949674
x86: remove the reboot=bios command line parameter ( #12193 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-09 15:20:11 +00:00
cb4f3079cc
bcm63xx: remove bcm_tag usage in kernel
...
Fixes #12292 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-09 08:08:49 +00:00
2584e7ddda
bcm63xx: fix 963281TAN image names
...
it's a 6328, not a 6348.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08 13:08:40 +00:00
350022b54a
firmware-utils: move bcm_tag.h here
...
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08 09:59:50 +00:00
752bf49b70
bcm63xx: fix entering failsafe through button
...
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08 09:59:44 +00:00
bbb2b87002
cns3xxx: add sysupgrade support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/base-files/lib/cns3xxx.sh | 22 ++
target/linux/cns3xxx/base-files/lib/upgrade/platform.sh | 122 ++++++++++++++++
target/linux/cns3xxx/image/Makefile | 19 +-
3 files changed, 159 insertions(+), 4 deletions(-)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:24:02 +00:00
bb5ccd89c3
cns3xxx: add GW2383 board support
...
Add GPIO/LED support for Gateworks GW2383
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/patches-3.3/300-laguna_support.patch | 18 +++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:58 +00:00
e2eaa02a71
cns3xxx: fix gpio access and add gpio IRQ support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch | 536 ++++++++++++++++++++
1 file changed, 536 insertions(+)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:52 +00:00
9ab77f9d45
ixp4xx: update Gateworks Avila board support
...
Several new features for newer boards:
- add additional UARTs present on some boards
- add additional LEDs present on some boards
- add HSS audio device codec present on some boards
- add support for GSC present on some boards
- add per model setup support for newer boards
- set FLASH window per-model for boards with larger FLASH
Some fixes:
- add IRQ mapping for additional PCI devices (USB Host)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:47 +00:00
0f9c180aae
ixp4xx: patch cleanup
...
roll all avila patches into a single patch (no code changes)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:43 +00:00
acc0d609a4
ixp4xx: Add HSS audio driver for Avila product family
...
Add ixp4xx HSS audio driver for Avila
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:39 +00:00
44565900dd
ixp4xx: update Gateworks Cambria board support
...
Several new features for newer boards:
- add irq mapping for additional devices
- add platform data for i2c bus to SFP modules
- add additional UARTs present on some boards
- increased R/W delay for expansion bus UARTs
- add additional LEDs present on some boards
- add GPIO exports and configuration
- add ENET switch config present on some boards
- add support for GSC present on some boards
- added per model setup support for newer boards
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:34 +00:00
c4b2739a32
ixp4xx: patch cleanup
...
roll all cambria patches into a single patch (no code changes)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:29 +00:00
8d948d2d20
ixp4xx: split out new UART I/O to its own patch
...
This is being done for general cleanup
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:23:25 +00:00
56803b05a0
x86: rename the iso file to openwrt-x86-generic.iso
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:05:39 +00:00
7bb6460a5d
x86: remove grub-legacy
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:01:56 +00:00
ea575c9316
x86: add grub2 iso support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:01:52 +00:00
7f67793f59
x86/generic: enable cdrom + iso9660 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-07 23:01:47 +00:00
9eb5ed1482
ar71xx: build image for the TL-WR841N/ND v8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:06 +00:00
276b0a594d
ar71xx: user-space support for TL-WR841N/ND v8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:05 +00:00
4d225ea147
ar71xx: add support for the TL-WR841N/ND v8 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 20:16:03 +00:00
6e36f40ae6
[brcm47xx]: bcma: do not initialize deactivated PCIe cores
...
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 15:45:54 +00:00
1f128d7c23
[brcm47xx]: use memcmp in mem size detection as suggested by blogic
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 15:42:12 +00:00
3e911e9ef1
[rdc] fix typo in 05_set_ether_mac_rdc preinit script ( #11166 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 12:36:50 +00:00
b37016d8b6
ramips: add image for ALL0256N-8M
...
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.
[juhosg: change suffix from '8m' to '8M']
Patch by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04 06:34:09 +00:00
d69ebca3eb
[pxa] add Default and Gumstix PXA profiles
...
Gumstix builds a fake flash image for usage in qemu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:15:05 +00:00
f538d04c12
[pxa] advertise jffs2 feature
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:12:57 +00:00
d004ed49d5
[pxa] remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:12:39 +00:00
899077ffa5
[pxa] fix build with latest gpiolib changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:12:03 +00:00
f004690f1a
[mcs814x] more convertions to {read,write}_relaxed I/O accessors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:10:47 +00:00
975bfc4188
cns3xxx: add missing kernel config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 15:31:34 +00:00
a7b580a310
[kernel] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:45:53 +00:00
b2385c1538
[brcm47xx]: bcma: use fallback sprom if sprom on card was not valid
...
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:45:31 +00:00
0056094a98
[brcm47xx]: bcma: initialize sprom earlier
...
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:44:44 +00:00
a65fa180cd
[brcm47xx]: run make kernel_oldconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:44:04 +00:00
7d525bd21f
[brcm47xx]: ignore the last page on bcma based SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:43:40 +00:00
3d85f4a79f
[brcm47xx]: Fix reading sprom from nvram without a prefix
...
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:43:13 +00:00
08ef69592e
[brcm47xx]: improve the check for the memory size
...
This will hopefully fix bug #9360 and #9097 in trunk.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-30 11:42:16 +00:00
293dd74caa
[kernel] dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 21:54:31 +00:00
7728944c0b
[atheros] add support for adm6996 phy
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 21:38:02 +00:00
e179b44f1d
[lantiq] tapi was not registeredproperly for most arcadyan boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 20:57:06 +00:00
dad87f7f50
Add FIQ support for cns3xxx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:35:35 +00:00
55b1f50e03
Update board support for Gateworks Laguna Product family
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:34:18 +00:00
c0a60594a8
USB iso mode fixes
...
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-28 17:31:22 +00:00
f2c23625e1
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:42 +00:00
0af4307860
generic: enable CONFIG_USB_EHCI_TT_NEWSCHED
...
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.
See: http://www.spinics.net/lists/linux-usb/msg31993.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 20:05:39 +00:00
b4ae759bbb
ramips: add memory detection code for RT5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:15 +00:00
ae436c404b
ramips: allow to use custom code for memory size detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 10:18:14 +00:00
0d211243f7
[uml] include sys/resource.h in arch/um/os-Linux/start_up.c ( #12155 )
...
Required for recent (e)glibc systems
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 09:21:01 +00:00
335b61f11a
[cns3xxx]: fix ncores for single-core systems.
...
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:07:17 +00:00
eec34ef032
[cns3xxx]: add i2c retries
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:06:13 +00:00
4f0ecc3ff5
[cns3xxx]: fix pcie abort handling
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27 08:05:19 +00:00
77deb37604
[brcm63xx] remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 20:11:37 +00:00
0fe0b149fa
generic: add upstream commit id to codel patches and refresh those
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 14:17:17 +00:00
e2356de36b
[kernel] backport the upstream entropy changes ( #11951 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:54:01 +00:00
fa31c1ff06
[targets] get rid of the IRQF_SAMPLE_RANDOM flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-26 12:53:58 +00:00
1b0eab1729
[mcs814x] add wmbus-repeater to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:56:50 +00:00
1cd6db74ac
[mcs814x] enable multicast and advanced ip routers configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:53:34 +00:00
c0a7d5c938
[mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:50:20 +00:00
4bae4b20b2
[ramips] make uci-defaults switch detection work on rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:18 +00:00
d27303e486
[ramips] add ethernet support for rt5350
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:47:08 +00:00
f00a987a69
[ramips] make ramips ethernet use a register mapping table
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:46:58 +00:00
55fc9a401d
[brcm47xx]: activate failsafe on all ports of the switch and not just port 0.
...
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:04:59 +00:00
cd7d6a23f7
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:41 +00:00
40e58ce1c3
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:40 +00:00
020a46d895
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:57:38 +00:00
685cfcf229
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 12:49:43 +00:00
cdfbfeaa7a
[ramips] unbreak port mapping detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 09:51:48 +00:00
2fce460e3b
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24 18:45:56 +00:00
4fe0549e77
x86: avoid using grub prepare when using grub2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23 09:59:56 +00:00
be353bdfb5
x86-generic: enable a few more common kernel options/drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 23:29:20 +00:00
0bc9377f09
kernel: increase log buffer size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 23:10:42 +00:00
fc54d059bf
x86: enable usb storage support for the generic subtarget to support booting from usb devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 21:15:59 +00:00
b043edb3d5
x86: add support for building grub2 images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 20:10:42 +00:00
7bec5b7dd4
x86: split generic image building into a separate script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 20:10:35 +00:00
Florian Fainelli
Hauke Mehrtens
Gabor Juhos
John Crispin
Luka Perkov
Imre Kaloz
Jonas Gorski
Jo-Philipp Wich
Felix Fietkau