a8d5a0ca4d
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22 20:15:34 +00:00
7660d3dd5b
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
...
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17 17:56:02 +00:00
f120a60729
[tools] use HOST_STATIC_LINKING instead of hardcoding -static
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12 12:34:30 +00:00
0ddff5a4ea
[tools] firmware-utils: link statically
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 19:27:08 +00:00
71df70b95d
[tools] adds mkdapimg
...
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24 20:38:49 +00:00
f7b9691687
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:04 +00:00
1e0b48fafb
tools: clean up Makefiles / make ccache work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15 11:43:13 +00:00
b95ee030ad
[tools] Add firmware tool for generating factory images for Edimax devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30 22:57:41 +00:00
6780ee387d
tools/firmware-utils: add yet another buffalo tool
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 08:04:53 +00:00
bcac11b460
tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04 06:48:42 +00:00
37ae50ee24
tools/firmware-utils: add buffalo specific fw tools
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:21 +00:00
8615c287a1
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
...
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:34:05 +00:00
d0757421a7
brcm47xx: Add edimax PS1208mfg support
...
Thank you clemvangelis for the patches. (closes #7672 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02 21:27:54 +00:00
caefcca898
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool.
...
* Rewrote commandline parsing code using gengetopt
- We now get long options
- We have more options including use of the info section for
board information (e.g. to add the same boardid but
different GPIOs on different routers)
* Added back the ability to write stock images (this is useful, for example,
when copying the firmware from the in-memory flash, and then being
able to create an image that will let you revert to/test stock firmware
* Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0)
* Added ability to use all sections of the imagetag, including custom magic
signatures (e.g. for the Telsey router I'm adding soon), info sections,
and reserved sections
* Added putting the router type (as defined in the image generating Makefile)
into the info1 section and the filesystem type in the info2 section.
This will be used by mtd (when I add the code) to return the name of
image used to flash this router. (As requested by Jo, as well as being
useful for same boardid different board scenario described above).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 06:46:53 +00:00
42a913f817
tools/firmware-utils: new tool for the Zcomax devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03 18:14:40 +00:00
c9d8571734
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
...
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes #7702 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06 20:21:32 +00:00
fa8999e464
Revert r21806 there are no users of it yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14 21:49:03 +00:00
b39b1b61a9
[tools] add hcsmakeimage, for cable modems/routers based on bcm33xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14 21:47:21 +00:00
efe0f8bd76
[tools] add mktitanimg to create Titan (AR7-based) images ( #6632 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-06 19:16:43 +00:00
ea35e3e4c9
[tools] firmware-utils: unify cc and cc2 macros, simplifies Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01 01:56:02 +00:00
e402bf7a8e
[tools] firmware-utils: copy bcm_tag.h to src/ and get rid of cc3 macro, fixes imagetag compilation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01 01:17:46 +00:00
1c396a22fd
ar71xx: create images for the WNDR3700, which can be flashed via the factory web interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 09:28:25 +00:00
b601f71cb5
firmware-utils: add WNDR3700 image fixing tool (thanks to Anael Orlinski)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28 08:25:53 +00:00
31083d5f9e
[tools] firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-12 08:59:18 +00:00
c328f90581
[tools] firmware-utils: add a tool to compute crc value for the 5gxi firmware
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-25 09:41:06 +00:00
4240b7c838
[tools] firmware-utils: add a file {en,de}cryption tool, based on the PC1 encryption algrithm
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-24 16:35:38 +00:00
157a4ab646
firmware-utils: add a small utility for generating nand flash images with ecc info
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14 20:42:28 +00:00
3339e02ed8
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known
...
imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987 ).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 08:04:52 +00:00
627802ff62
tools/firmware-utils: Added encode_crc, for Freecom devices.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 11:39:32 +00:00
a51f29fd74
[tools] firmware-utils: add new firmware generation tool for the TP-LINK TL-WR941ND device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-26 16:59:15 +00:00
b892e1fb85
build system refactoring in preparation for allowing packages to do host-build steps
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 04:37:20 +00:00
769e8639c4
[tools] firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-04 21:09:06 +00:00
0feb20763b
Add makeamitbin to generate images for other RDC-based devices, thanks sn9 !
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28 16:26:42 +00:00
312f012530
[tools] firmware-utils: new firmware generation tool for the WILIGEAR WBD-111
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-13 17:17:19 +00:00
28b170883b
replacement of the add_header utility used by various vendors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-27 12:18:31 +00:00
c097f77d51
bcm963xx: add cfe image tagging utility
...
This replaces the proprietary bcmImageBuilder program from the Broadcom source
drops. It basically adds a 256 bytes header in front of the kernel + rootfs
which contains a few text signatures, the locations of the data as well as the
checksums of the data and the tag. It also adds a 12 bytes header in front of
the LZMA kernel which contains the load address, kernel entry and the size of
the compressed LZMA data.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 17:29:51 +00:00
a91bb11f6a
buld images for the Ubiquiti LiteStation and NanoStation ported from http://atheros.openwrt.net . Tested on a Nanostation 2 with airos 3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-07 23:47:17 +00:00
a342adc51e
[tools] firmware-utils: new firmware generation tool for the Cellvision CAS-6xx/NFS-xxx devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-29 08:31:54 +00:00
17391bc30b
Use $(CP) instead of $(INSTALL_BIN) for binaries.
...
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 18:53:06 +00:00
6427bfebf0
ar7: add eva image generation (thanks Axel Gembe)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-22 14:20:02 +00:00
d10a56dc58
build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 00:04:25 +00:00
20fc312ae9
add firmware generation tool for ZyXEL boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-02 19:05:28 +00:00
789da13432
host-build.mk used incorrectly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-10 07:02:04 +00:00
30a4001aa4
Remove useless mksyshdr utility, replaced by mkcsysimg, Edimax images are no longer broken, and have been tested
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-03 09:50:17 +00:00
5218d952cd
Add ADM5120 based edimax image generation utilities
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-02 17:10:48 +00:00
20cf5f8f68
Add firmware generation for other Compex boards based on myloader, thanks to Juhos Gabor !
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-22 21:36:15 +00:00
9881eea43e
Add image generation for edimax routers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-21 15:04:07 +00:00
61dfb5041b
Add srec2bin to firmware-utils
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-18 09:33:39 +00:00
4145f16872
Add airlink firmware generation tool, thanks to Vassily Galinsky for that !
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-11 17:49:05 +00:00
3115db47d4
remove custom partition table hack, add ptgen utility for generating partition tables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-07 00:26:26 +00:00
Gabor Juhos
Jo-Philipp Wich
John Crispin
Vasilis Tsiligiannis
Florian Fainelli
Hauke Mehrtens
Daniel Dickinson
Felix Fietkau
Rod Whitby
Imre Kaloz
Travis Kemen
Eugene Konev
Mike Baker