be7d168013
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04 12:36:13 +00:00
fd034dbcee
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:12:07 +00:00
a049974896
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:10:37 +00:00
8ddfb80294
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-03 17:09:39 +00:00
d4ed385bc3
broadcom-diag: add support for the ASUS RT-N12
...
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 15:44:04 +00:00
a20e8232fb
broadcom-diag: increase version number
...
There are some changes in there and this should be rebuild.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 15:06:14 +00:00
24880dbaa0
brcm47xx: improve detection of Linksys WRTSL54GS
...
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 19:33:59 +00:00
5b1af986f6
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
cd7c8bbe3d
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:30:31 +00:00
8ad163f6f5
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:28:37 +00:00
6d0a2d148e
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:26:35 +00:00
f1b4824c86
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:37 +00:00
Hauke Mehrtens
John Crispin