Commit Graph

68 Commits (2fb7989420a673711f44c4dbc18bca1d85bf77e3)

Author SHA1 Message Date
John Crispin 89329096df ramips: add support for Tenda 3G150B
Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-22 09:35:22 +00:00
John Crispin 35d648cb2e ramips: improve and fix Memory 2 Move support
This patch is a follow up for my previous patch:
"ramips: add support for Intenso Memory 2 Move USB 3.0".

It fixes a couple of errors in the DTS (one of which broke
the gpio-buttons). The kmod-leds-gpio dependency has been
dropped as it is already part of the ramips target.

Furthermore the ramdisk/uImage image is generated by default
for the rt3050 subtarget. This image is needed to flash
OpenWrt for the first time onto the device via TFTP.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-22 09:35:12 +00:00
John Crispin 75b65571c9 ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.

The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]

Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-17 14:06:13 +00:00
John Crispin b8f3eecf55 ramips: Fix HooToo HT-TM02 support.
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1.
- Fix board name, as the company name is HooToo and not HOOTOO.
- Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.)

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-08 20:26:20 +00:00
Luka Perkov 3c5a4358eb ralink: DCS-930: enable sound
Camera has microphone; in order to use it by default enable sound support.

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-11 00:08:05 +00:00
John Crispin 1968a036e6 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-29 11:01:17 +00:00
John Crispin 784895b84e ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-10 08:56:43 +00:00
John Crispin 5f9a01b40f ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:07 +00:00
John Crispin f0f9e6052f ralink: dwc_otg->dwc2
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-08 17:33:16 +00:00
John Crispin 6c505b7533 ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-25 06:35:46 +00:00
John Crispin 568b0f9dd3 ralink: clean up HAME profiles, remove unnecessary packages.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-18 13:09:46 +00:00
John Crispin 4051d796da ramips: add profile for easyacc wizard8800
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-03 14:31:18 +00:00
John Crispin a3ea08a825 ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-08-01 20:51:24 +00:00
John Crispin ea7c3bba1b ramips: add a profile for AWM003
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-22 09:58:21 +00:00
John Crispin 0f59f0f358 target/linux/*: more dead package cleanups
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-10 20:15:50 +00:00
John Crispin fb6da76b11 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-10 20:05:43 +00:00
John Crispin 9de9667c6e ralink: wpa does not exist, use wpad-mini instead
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-10 19:16:19 +00:00
John Crispin a78345d9f5 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-02 07:42:44 +00:00
John Crispin e6af58406e ramips: cleanup some rt305x profiles
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-19 14:13:07 +00:00
John Crispin 10132c1857 ramips: restore AWM002-EVB profile in asiarf.mk
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board.  This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.

Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-16 18:54:42 +00:00
John Crispin 90ee91f93d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-13 09:16:15 +00:00
John Crispin 8a723aceb1 ramips: add missing profile for DIR-615-D
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:43:07 +00:00
John Crispin 0764f95460 ralink: Enable Asus RT-N10+ in menuconfig targets
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:41:45 +00:00
John Crispin 522d86d5bb ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-22 08:08:51 +00:00
John Crispin 5278bbb196 ralink: add HLK-RM04 support
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 12:07:40 +00:00
John Crispin f580ce87c0 ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07 15:02:44 +00:00
John Crispin f983916240 ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 05:56:46 +00:00
John Crispin 7918a35c11 ramips: DIR-610-A1 Support
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 19:35:27 +00:00
John Crispin 69c35b6e2b ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:15 +00:00
John Crispin 779826d982 ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:09 +00:00
John Crispin 64ad8ac32d ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:04 +00:00
John Crispin c956dee4db ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:58 +00:00
John Crispin 48159ba927 ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:53 +00:00
John Crispin 9e2a11f634 ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:46 +00:00
John Crispin 8b30c849c3 ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27 09:23:52 +00:00
John Crispin 60199db337 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27 09:23:24 +00:00
John Crispin 97454aa7aa ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-24 08:54:41 +00:00
John Crispin a6fc8d2e4d ramips: Add support for Huawei HG255D in trunk
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 15:36:39 +00:00
John Crispin 823b8cfc5f ralink: set remove dwc_otg from default packages and use dwc2 instead
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 13:52:52 +00:00
John Crispin ecb32a2174 ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:56 +00:00
John Crispin a4e76e8e46 ramips: add support for belkin F7C027 wemo/homeautomatisation plug
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:50 +00:00
John Crispin 741c702de8 ramips: Update ARC Freestation profile
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:35 +00:00
John Crispin 7c6b0f4953 ramips: move dlink profile to correct sub folder - 2nd try
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:34:20 +00:00
John Crispin ee51015692 ramips: move dlink profile to correct sub folder
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 08:24:26 +00:00
John Crispin ecff443b65 ramips: introduce DTS for ALL5003
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:01 +00:00
John Crispin 77dd775839 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:53 +00:00
John Crispin 37b08bf005 [ramips] fix ALL5002 default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:16 +00:00
John Crispin e97253bd46 [ramips] fix upvel profile names
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:41 +00:00
Gabor Juhos 90c84fd003 ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:45 +00:00
Gabor Juhos c2aebc74ad ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19 17:05:07 +00:00