2ff9b90ae7
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-24 14:19:09 +00:00
bdd47fd07e
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23 20:55:34 +00:00
8217b9bc8c
generic: ar8216: set delay values for SGMII mode on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23 20:55:26 +00:00
24cc4007ce
[buildroot] add preliminary support for musl
...
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-23 20:02:29 +00:00
fffc430bd8
imagebuilder: merge r25078 to align files/ handling with current buildroot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22 19:46:54 +00:00
1ef9ccffe2
generic: ar8216: introduce ar8216_mib_op helper
...
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.
This change also fixes a lockdep warning in
ar8216_mib_flush.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-22 10:33:03 +00:00
b152f5091e
swconfig: make it compatible with 3.7
...
swconfig does not compile with 3.7 because
struct netlink_notify->pid has been renamed to
struct netlink_notify->portid
and
struct genl_info->snd_pid has been renamed to
struct genl_info->snd_portid
Use the new names and add compatibility patches
to 3.3 and 3.6.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-21 17:38:11 +00:00
811c89a11d
[lantiq] adds proper package selection for dgn3500
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-21 06:06:48 +00:00
c20c257448
cns21xx: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 21:37:53 +00:00
8ea44a2803
generic: add some missing symbols for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 21:34:43 +00:00
7ce8530f4f
generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'
...
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 20:40:04 +00:00
6446586528
generic: ar8216: remove an unblanced mutex_unlock call
...
Fixes the following warning:
[ 94.080000]
[ 94.080000] =====================================
[ 94.080000] [ BUG: bad unlock balance detected! ]
[ 94.080000] 3.3.8 #2 Tainted: G O
[ 94.080000] -------------------------------------
[ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] but there are no more locks to release!
[ 94.080000]
[ 94.080000] other info that might help us debug this:
[ 94.080000] 2 locks held by swconfig/1220:
[ 94.080000] #0 : (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[ 94.080000] #1 : (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[ 94.080000]
[ 94.080000] stack backtrace:
[ 94.080000] Call Trace:
[ 94.080000] [<8028dc58>] dump_stack+0x8/0x34
[ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[ 94.080000] [<80222440>] genl_rcv+0x24/0x34
[ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[ 94.080000] [<8006ad78>] stack_done+0x20/0x40
[ 94.080000]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 20:40:03 +00:00
756a18fffc
generic: ar8216: add missing locking calls
...
Fixes the following lockdep warning:
[ 19.160000] ------------[ cut here ]------------
[ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 19.210000] Call Trace:
[ 19.220000] [<8028dc38>] dump_stack+0x8/0x34
[ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[ 19.250000] [<8008a630>] worker_thread+0x22c/0x334
[ 19.260000] [<8008e544>] kthread+0x88/0x90
[ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[ 19.270000]
[ 19.270000] ---[ end trace 22e9d696adfa6a08 ]---
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 20:40:00 +00:00
1c257282ce
generic: convert yaffs to use kuid_t and kgid_t on 3.6+
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 17:45:24 +00:00
dfbfd918ff
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 16:29:43 +00:00
5c2dfd1289
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 16:29:42 +00:00
429265eaf5
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 15:53:17 +00:00
4e4c891c61
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 14:40:22 +00:00
400a454430
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 14:27:17 +00:00
ec210ee957
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 12:17:45 +00:00
5da0e05c2e
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 12:17:44 +00:00
68f74bd0d7
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 12:17:43 +00:00
a36d8dba57
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 12:17:41 +00:00
0cbf423c6a
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 07:19:10 +00:00
e71db9dfd9
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 07:19:09 +00:00
acda372a74
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-20 07:19:06 +00:00
c48396be51
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-19 12:38:26 +00:00
9544bd9e12
[generic/3.7]: fix 820-usb_add_usb_find_device_by_name.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-19 10:56:09 +00:00
9f3fcfae17
kernel: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 21:40:30 +00:00
a47fb21bf8
brcm47xx: add support for kernel 3.6
...
This is based on the patch by Peter Wagner.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 21:27:00 +00:00
b6eec43745
kernel: add missing generic config options for 3.6+
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 20:54:53 +00:00
1cad0fee42
kernel: add CONFIG_XZ_DEC=y to generic
...
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 20:48:53 +00:00
a729caa226
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 20:25:13 +00:00
43d2eb64cc
[generic]: add 3.7-rc6 support (patch 820 still has to be fixed)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 18:52:38 +00:00
51c169ab3d
generic: ar8216: add MIB counter support for the AR8216 switch as well
...
Thanks to Jonas Gorski for the reference URL.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 16:21:00 +00:00
232b64b668
generic: ar8216: rename AR8216_*_STATS_* defines
...
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.
Thanks to Jonas Gorski for the report.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 16:20:56 +00:00
3c8aacbed8
generic ar8216: allow to read/reset MIB counters via swconfig
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 12:26:35 +00:00
1101fbc106
generic: ar8216: use dynamically allocated private data in ar8216_probe
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 12:26:34 +00:00
7387dcd0e9
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 10:18:02 +00:00
06e5513835
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 10:18:01 +00:00
14d1afd7e0
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:51:04 +00:00
897231379b
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:41 +00:00
18d646cf12
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:39 +00:00
ac48dc8ab0
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:37 +00:00
0ca317b379
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:36 +00:00
d172b85b4f
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:35 +00:00
a582d97b59
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:32:33 +00:00
8d8c4c5812
target specific patches have nothing to do in generic..
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 09:22:38 +00:00
f1a9d4d2c8
generic: remove temporary config file introduced in r34227
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 08:51:56 +00:00
a0e5999983
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-18 08:41:31 +00:00
f42b6353a9
[leon] move patches to patches-2.6.36
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:55 +00:00
402b3d79fd
[sparc] remove broken flag
...
The SPARC qemu target works like a charm with the following qemu command-line:
qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:52 +00:00
d4e8b41d85
[sparc] update to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:49 +00:00
af1483e286
[kernel] add missing framebuffer config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:45 +00:00
e6c745aed7
[sparc] advertise jffs2, squashfs and ext4 features
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:42 +00:00
a389dafc9a
[sparc] resync kernel configuration with 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:39 +00:00
ff82f93a24
[sparc] build root filesystems and install them in $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:36 +00:00
141f8f453d
[kernel] do not build crashlog on sparc too
...
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:33 +00:00
f41d3cd6be
[uml] switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:29 +00:00
9f1aa6fea4
[uml] add support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 16:32:26 +00:00
ae2cf98d8d
[ar7] move acx-mac80211 to the ar7 generic target
...
None of the AC49x boards that we support actually have Wi-Fi.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:55 +00:00
60412980c1
[kernel] 3.6: add some framebuffer related config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:51 +00:00
0d53fbfd15
[ar7] push atm, br2684ctl and kmod-pppoa down the DSL Profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 13:00:48 +00:00
7ff2c6b0f6
brcm47xx: revert r33935: check for .ELF header in partition parser
...
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420 .
With the patch the linux partition also contained the loader which is in the first 128KB.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-15 16:39:45 +00:00
e16546fc1f
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-14 14:18:33 +00:00
25d790021b
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:19 +00:00
588d32a4c5
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:18 +00:00
9b40fe6ffc
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:17 +00:00
1a6d0dbc95
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:15 +00:00
f1d93b0419
generic: refresh 3.6 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 20:57:13 +00:00
a28b70572f
[malta] fix badly named patch file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:39:44 +00:00
78c84858da
[malta] switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:20:19 +00:00
ae8b3d1648
[malta] fix CBUS UART registration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 17:20:14 +00:00
776d3f73f0
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:03 +00:00
4c0d33f7dd
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:01 +00:00
8077760419
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:48:00 +00:00
60091b17d1
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 14:47:58 +00:00
1d0ec1e960
[lantiq] fixes ar9 / dgn3500 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13 08:54:14 +00:00
d8bd9f9b15
[ramips] previous commit pushed 1 file too many ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:36:23 +00:00
043881f47f
[ramips] move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34177 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:35:01 +00:00
49f169f67f
brcm47xx: remove double definition of kmod-tg3 added in r34150
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:34:00 +00:00
4e9fb7e774
brcm47xx: fix cfe config detection on WGT634U broken in r33920
...
Thanks Russell Senior for reporting this.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 21:32:33 +00:00
3bd54a7888
cns3xxx: merge gpio patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 19:27:30 +00:00
d9e7b083bb
cns3xxx: fix build failure after r34168
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 19:27:29 +00:00
b070d71880
[kernel] MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
...
And get rid of the AR7 patch because at least the Alchemy SoC also needs it
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 12:49:47 +00:00
29fb5ae792
[cns3xxx]: reorder, rename and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 09:18:00 +00:00
7a955260a6
[cns3xxx]: split spi patch, follow mainline file naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 08:22:14 +00:00
cba5b86e13
[cns3xxx]: split the i2c patch, merge the retry fixup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 08:21:38 +00:00
f0675c7cae
[atheros] move redboot boardconfig patch into target folder
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-12 07:56:37 +00:00
505a81f173
[ixp4xx:] add support for the Tonze AP-422/425
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 21:04:30 +00:00
a20b4c6242
refresh patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 21:03:52 +00:00
e3e30fcfb6
[cns3xxx]: generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:57:04 +00:00
37b69da0ca
cns3xxx: convert dwc_otg patches to files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:58 +00:00
80a28570bd
cns3xxx: convert ethernet patches to files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 20:03:56 +00:00
76d85346b0
bcm63xx: switch to 3.6.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:57:17 +00:00
202626daa1
[ixp4xx]: move fixed mapping of internal devices into vmalloc region
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:29:27 +00:00
ddf27142f4
[au1000] advertise squashfs feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:54 +00:00
8a9badd8a3
[au1000] add support for Linux 3.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:50 +00:00
1ff596e058
[au1000] split kernel config between generic, au1500 and au1550
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 19:26:44 +00:00
dbaa47e43b
[ar7] add support for Linux 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:41:09 +00:00
30b73257e7
[ar7] move files directory to files-3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 18:40:48 +00:00
c5f6531ab2
brcm47xx: remove ssb-gige package
...
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 17:30:33 +00:00
697dd7d82f
[ar7] generate image for AC49x
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:39 +00:00
2e8c9209e9
[ar7] create AC49x subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:34 +00:00
ce15640628
[ar7] create generic subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:29 +00:00
b1482bba00
[ar7] detect AC49x flash partitions
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:22 +00:00
f8cd51f497
[ar7] support AC49x bootloader environment
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:14 +00:00
aafaeed5d5
[ar7] add AudioCodes AC49x platform support to kernel
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:09 +00:00
575fa64966
[ar7] free memory below kernel offset
...
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11 16:11:00 +00:00
f0bff1a81a
x86/generic: don't disable usbfs ( #12452 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 23:28:58 +00:00
851e20d9e4
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 22:10:47 +00:00
d3d1f114b4
bcm63xx: add two missing usb patches to 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:16 +00:00
bf619e597c
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10 19:59:07 +00:00
4c2e3be25a
cns3xxx: clean up pcie patches
...
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 21:37:54 +00:00
5c300b9f41
[lantiq] add more profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:58 +00:00
3a08b05184
[lantiq] a few more dts files (WIP)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:43 +00:00
c27f32609a
[lantiq] add mtd split and atm patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 19:26:30 +00:00
114523d5b7
x86: use $(strip) for the at_keyboard check
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:53:36 +00:00
ce5e0d1df8
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 10:19:51 +00:00
703033b343
generic: sanitize deps_initramfs list
...
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09 09:07:29 +00:00
1a18927dcf
cns3xxx: exit from laguna late_initcall if not running on laguna board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 11:31:56 +00:00
2a19fe9d2f
cns3xxx: add PPS support for laguna
...
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:42:31 +00:00
72ece984b9
[cns3xxx]: fixup symbol selection
...
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08 05:40:34 +00:00
7afe9fb306
cns3xxx: fix coding style in board script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 23:12:06 +00:00
12d41e1668
[ramips] adds fon20n profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:31 +00:00
f06334f812
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:21 +00:00
30627c7870
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:26:04 +00:00
532c332441
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:55 +00:00
8b5e21cf9c
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 20:25:34 +00:00
704a78d6b6
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 09:01:03 +00:00
f1302ff02d
[ixp4xx]: fixup typos in the compex patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 07:51:24 +00:00
b8e5c3fb59
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 15:21:46 +00:00
9f5fd7db54
cns3xxx: refresh kernel config file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:43 +00:00
5fabd70da1
cns3xxx: use files directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 11:16:41 +00:00
ce0ec8cf6f
[lantiq] add OWRTDTB marker patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 10:39:43 +00:00
8dd03e55f9
[lantiq] add support for arv7525
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 07:38:24 +00:00
fee2c93362
[cns3xxx]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:45:12 +00:00
3cc763aa54
[cns3xxx]: add default packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 05:39:08 +00:00
06f3165bc2
linux: generic: fix split_squashfs for 3.6
...
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06 00:48:21 +00:00
3590dfe2a4
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 22:50:29 +00:00
ed27b638cd
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:28 +00:00
63a2533400
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:23:27 +00:00
d7e7749443
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 13:22:09 +00:00
7cb435123c
[ixp4xx]: use the mainline machname for the compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:38:23 +00:00
1302d425cb
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:45 +00:00
57d2dcb6a0
linux/3.3: backport an upstream GPIO patch
...
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 11:04:43 +00:00
802d3dc718
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05 06:58:53 +00:00
90c05775ac
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 22:08:54 +00:00
82f7bd78ce
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 21:12:20 +00:00
dd77aab2d5
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 20:15:18 +00:00
68c575d5a9
linux-3.6: fix portability of some includes files in tools/ used on the host
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-04 17:01:15 +00:00
434f5edbf7
[lantiq] 3.6 is not the default yet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-03 13:29:44 +00:00
403bf784c9
[lantiq] adds dts files and make devicetree images buildable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:47 +00:00
2b11c5869f
[lantiq] update ase target for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:41 +00:00
613f20baba
[lantiq] add subtarget, as of 3.6 we dont seperate xway SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:36 +00:00
3c3f1ddfbd
[lantiq] adds 3.6 files, patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:26 +00:00
5a5e4b2782
[lantiq] move files/ -> files-3.3/
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:07:02 +00:00
bd7dc4e3ea
[lantiq] prepare Makefile for 3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02 20:06:51 +00:00
ba0ed558ae
generic: make yaffs work on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-01 11:07:23 +00:00
9279cff99c
generic: rename jffs2 patches
...
Make room for the upcoming yaffs patches.
No functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-01 11:07:16 +00:00
78170ee893
[sdk] Fix feeds.conf.default when no SVN info present
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-01 07:15:49 +00:00
8fda8ed025
generic: use mtd_* helpers in the yaffs code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34046 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 21:17:30 +00:00
8cb200c475
[cns3xxx]: move PCIe init to subsys init call
...
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug. I have modeled the cns3xxx PCIe init after
other ARM platforms. Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.
Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 20:16:53 +00:00
5abc89f037
kernel: update linux 3.6 to 3.6.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 20:09:39 +00:00
5e9e20bc4f
generic: split yaffs-3.2-fix patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 19:33:12 +00:00
af243e70af
generic: replace yaffs-2.6.39 patch
...
Use backported upstream patches instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-31 15:12:45 +00:00
2400c2b7f7
generic: replace yaffs mutex_fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:24 +00:00
ce71eb1f6e
generic: replace yaffs symlink fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:23 +00:00
0461aab56a
generic: rename yaffs patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 21:16:21 +00:00
d4cfa7ddca
[realview] set earlyprintk UART to be the default Realview UART
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 16:56:10 +00:00
e3f12313fe
generic: fold yaffs_git_2010_10_20 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 14:58:17 +00:00
029a10f4cb
generic: fold yaffs_cvs_2009_04_24 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-30 14:58:13 +00:00
d2c33eba70
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 17:24:30 +00:00
e036077e9e
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 10:11:05 +00:00
dc8d837bab
add missing 3.6 symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 10:00:02 +00:00
3d12aaad33
[orion]: the uImage's filename will hardly change
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 09:55:20 +00:00
32c84b93c1
generic: add more symbols for 3.6
...
Also refresh the config file with kconfig.pl.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29 09:08:59 +00:00
a8ec452c60
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 19:52:02 +00:00
b783fb21a5
kernel: update linux 3.6 to 3.6.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 18:59:39 +00:00
1517cc75d2
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 12:21:15 +00:00
7a14817d2d
generic: fix crashlog patch for 3.6
...
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-28 09:50:50 +00:00
4f3acd22a4
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 17:11:06 +00:00
bb2a90b763
generic: fix tcp_window_check patch for 3.6
...
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:
[ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[ 7.680000] Call Trace:
[ 7.680000] [<80273bc4>] dump_stack+0x8/0x34
[ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[ 7.710000]
[ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[ 7.720000] nf_conntrack_ipv4: can't register pernet ops
[ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 15:42:25 +00:00
de2b6820de
[generic]: instead of updating the whole file, just add the additional boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 13:29:36 +00:00
52b8424c48
[orion]: rename erase size variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:50:55 +00:00
fdb45e8803
[orion]: add support for Netgear WN802T
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:48:22 +00:00
61756f89b8
[orion]: don't enforce rootfs location
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 10:43:47 +00:00
e57364c03e
[brcm47xx]: generate images for the D-Link DWL-3150 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 09:42:58 +00:00
e737bdee77
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:42 +00:00
0011f2872a
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:40 +00:00
a08582ccd1
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:39 +00:00
b84f40ff4a
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:38 +00:00
7a1382cd1d
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:37 +00:00
cdeefe000e
generic: allow to disable [25]GHz support in ath9k via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 08:55:36 +00:00
d88a6ff008
generic: use mtd_read in myloader parser
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:59 +00:00
c2e77b8ab2
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:58 +00:00
71b8bf1a54
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:57 +00:00
68bb4e22cc
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 07:57:55 +00:00
0cbec5aa1e
generic: swconfig: use led_set_brightness in LED control code
...
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:18 +00:00
32d786c526
generic: add missing symbols for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26 18:58:15 +00:00
Jonas Gorski
Gabor Juhos
Florian Fainelli
Jo-Philipp Wich
John Crispin
Imre Kaloz
Hauke Mehrtens
Luka Perkov
Felix Fietkau
Daniel Dickinson