Commit Graph

1198 Commits (25d1d1e9f1d2a5f99b8f84f176025b0d568a20e1)

Author SHA1 Message Date
Felix Fietkau 731f8ee3a8 kernel: backport a fix for multiqueue selection to prevent tcp reordering with fair queueing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-17 10:07:52 +00:00
Hauke Mehrtens 565a027db3 kernel: add generic GPIO watchdog driver
This is used on Huawei E970 (brcm47xx).

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 21:07:52 +00:00
Gabor Juhos bfe5dcd235 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 17:03:29 +00:00
Gabor Juhos 2d7844c116 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 16:00:41 +00:00
Gabor Juhos 4382cb6c9c kernel/3.10: move OpenWrt MTD options into a submenu
Separate OpenWrt specific MTD options from the mainline
option by moving those into a new submenu in the kernel
configuration interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 15:16:16 +00:00
Hauke Mehrtens ac3e4a1200 kernel: b53: detect revision of BCM5325
The revision is stored in a different register than it is in other 
Broadcom switches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 13:30:49 +00:00
Hauke Mehrtens 593a7b7c77 kernel: b53: fix vlan write for BCM5325 revison 3+
These switches are integrated in some recent BCM53XX and BCM47XX SoCs
like the BCM53572.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 13:29:14 +00:00
Hauke Mehrtens 38484f47f2 kernel: b53: use hard coded switch reset gpio on some boards.
The Linksys wrt310n v1 does not have a robo_reset config variable in 
nvram, but GPIO Pin 8 is the pin needed for resetting the external 
switch, Linksys hard coded it into their source code.

Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 16:17:36 +00:00
Hauke Mehrtens 1a3dd5a001 kernel: b53: add soft reset for BCM539x switches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 16:14:02 +00:00
Gabor Juhos 80dab3e93d generic/3.10: remove unused defines from the rootfs split patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 10:19:10 +00:00
Gabor Juhos 9c2201ca15 generic/3.10: reduce number of ifdefs in the rootfs split code
Use the config_enabled() macro where it is possible.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 10:19:09 +00:00
Gabor Juhos f15f26672e generic/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 17:29:14 +00:00
Gabor Juhos c347a765b9 generic/3.10: rename mtd patches
- change patch numbers to group the related stuff together,
  - add mtd prefix where it is missing,
  - use hyphens in the patch names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13 17:24:25 +00:00
Hauke Mehrtens 86cc5185d1 kernel: update bcma and ssb to wireless-testing master-2013-09-09
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12 22:03:45 +00:00
Luka Perkov 6cd1deaeaa kernel: add support for ESMT F25L32PA with upstream submission
Signed-off-by: Flavio Silveira <fggs@terra.com.br>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12 14:38:48 +00:00
Felix Fietkau 16f14cc21f kernel: align the skb padding to power of two
The skb is usually started by a padding which allows the protocols in the
network stack to add their headers in front of the payload. The skb can be
reallocated in case the preallocated padding is not large enough. This can for
example happen in the function __skb_cow which will check the requested extra
headroom and allocate more buffer when the requested headroom is bigger than
the available one. The extra buffer is aligned again to the multiple of the
NET_SKB_PAD of the target architecture.

The macro used to create the multiple of the NET_SKB_PAD is written in a way
which allows only values power two as alignment parameter. The currently used
value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The
extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80,
128, 144 and so on. The generated values are also not monotonic (48 requested
bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64
allocated bytes).

These unexpected small values result in more reallocations of the buffer. This
was noticed prominently during tests between two QCA9558 720 MHz devices which
were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each
other. The throughput PC-to-PC during iperf TCP runs increased reliable from
186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s
in the other direction. This is a performance increase of ~14% just by reducing
the amount of reallocations.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11 14:30:15 +00:00
Florian Fainelli 9e55caf75b kernel: fix broken depends syntax introduced in r37933
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11 12:45:24 +00:00
Florian Fainelli 370246f06f kernel: Fix FIQ code on VIVT CPUs (#14145)
Backport an upstream patch to fix FIQ code on VIVT CPUs

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11 12:08:44 +00:00
Luka Perkov ecd7cc93fa kernel: allow hwmon GSC driver for all targets
- enable using hwmon GSC driver on all targets
- add a kmod package for it

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10 22:26:30 +00:00
Felix Fietkau c07c8b6e3a kernel: fix arch-dependent bug in hso module
Currently, the module causes an oops at least on rt5350. These patches
have been accepted upstream at:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10 13:47:44 +00:00
Jonas Gorski df430c20c5 kernel: b53: support phy ids for BCM5365
BCM5365 (and probably other older variants) use a different phy id, so
the phy driver never attached for them.
Fix this by adding the appropriate phy id to the fixup and the phy
driver.

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05 20:30:34 +00:00
Imre Kaloz 3300cb9b15 Add missing symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05 10:08:59 +00:00
Hauke Mehrtens 4fb01f7d91 kernel: b53: allow access the MIB counters on BCM5365
b53_no_ops has no elements and b53_port_ops has one element, this makes 
the code access some random memory when trying to access the mib 
counter functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04 16:15:10 +00:00
Gabor Juhos 0977e4452f kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 19:12:54 +00:00
Gabor Juhos 9b82f8e7aa generic: remove linux version checks from myloader.c
The myloader partition parser code uses ifdef wrappers
to make the code usable on kernels below version 3.2.
All targets are using kernel 3.3 at least so the wraper
is not needed. Remove that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02 16:33:13 +00:00
Felix Fietkau 7a22238d85 kernel: fix booting issues on imx23 and imx6 targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28 07:38:36 +00:00
Gabor Juhos 1cca5b1fec kernel: don't hide the 'Warning: unable to open an initial console' message
The 'Warning: unable to open an initial console' message
indicates an error in the rootfs. Remove the patch which
hides the warning.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27 12:03:01 +00:00
Gabor Juhos d6f3fb1793 kernel: ensure that /dev/console exists in initramfs
Linux expects that the /dev/console node is present
in the rootfs image. Create the node in initramfs,
in order to make std{in,out,err} usable even in early
init process.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27 12:02:54 +00:00
Felix Fietkau 6007ed4fa8 kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-26 17:47:14 +00:00
Gabor Juhos 1b2ea64f5a kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23 17:31:04 +00:00
Gabor Juhos e92011ca00 generic: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23 17:31:02 +00:00
Gabor Juhos 1331b3cd5b kernel/3.10: backport of_pci_get_devfn function from 3.11
Fixes the following build error on ramips/rt3883:

  arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \
  'of_pci_get_devfn' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors

Although the function is only used by the PCI driver
of the RT3883 SoC but at the moment but it might be
useful for other targets as well.

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23 17:07:20 +00:00
Felix Fietkau edc8daeffe kernel: crashlog: Avoid out-of-bounds write
vsnprintf returns the number of chars that would have been written, not
the actual number of chars written. This can lead to crashlog_buf->len
being too big which in turn can lead to get_maxlen() returning negative
numbers. The length argument of kmsg_dump_get_buffer will be casted to
a size_t which makes a negative input a big positive number allowing
kmsg_dump_get_buffer to write out of bounds.

Fix this by using vscnprintf which returns the actually written number
of chars.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-21 20:59:25 +00:00
Felix Fietkau e3ef8379a6 kernel: add back missing declaration in the MIPS DMA patch that broke octeon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18 05:49:57 +00:00
Luka Perkov 18e14911f8 kernel: drop dead pwm code
The files have last been used with 2.6.x kernel.

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18 01:25:41 +00:00
Luka Perkov 9cc31e17e8 kernel: drop dead glamo code
The code is not used since the s3c24xx target was removed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-18 01:25:40 +00:00
Luka Perkov 9b1c28f304 kernel: replace local m25p80 patches with upstream submission
http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html
http://patchwork.ozlabs.org/patch/268019/

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17 23:54:41 +00:00
Luka Perkov d3984f8fde kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patch
The patch in question has been accepted upstream in commit:

55bf75b7dd8ec875d048824f3cdecf8254e292e5

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17 22:29:05 +00:00
Luka Perkov 76574756e7 kernel: drop 110-fix_mtd_include.patch
Kernel builds just fine without this patch so we can just remove it.

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-17 17:09:41 +00:00
Felix Fietkau 1d6c8fac17 kernel: fix a small #ifdef bug in the noncoherent dma check rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15 09:29:53 +00:00
Felix Fietkau c03bfe942c kernel: improve dma ops inlining patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-15 09:23:07 +00:00
Felix Fietkau ec784b7356 ocf: switch MODULE_LICENSE from BSD to "Dual BSD/GPL" to make the kernel recognize modules as GPL-compatible
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 08:52:19 +00:00
Felix Fietkau 8f544d257d kernel: add patch to inline mips dma mapping functions - reduces code size and improves performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 17:26:08 +00:00
Felix Fietkau b10717fee9 rtl8367: add support for configuring the VLAN FID
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-12 17:25:25 +00:00
Florian Fainelli b6c1885f91 kernel: add some missing config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 20:58:05 +00:00
Hauke Mehrtens 0b5bdf9b5e kernel: fix DMA error when BCM4331 is connected to BCM4706
The BCM4331 supports a PCIe max request size of 512 bytes and uses 
that, but the PCIe controller in the BCM4706 just supports 128 Bytes 
and that causes a DMA error for packages bigger than 126 bytes. This 
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 16:17:05 +00:00
John Crispin b09bb5279a generic: make the module reloc pacth work on mips64
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-04 13:54:42 +00:00
Hauke Mehrtens 76cf5e5ba6 kernel: add missing config options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 20:13:54 +00:00
Hauke Mehrtens e437208b48 kernel: add missing config option
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 16:51:47 +00:00
Hauke Mehrtens bbce689cd3 kernel: add missing config option
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-02 16:16:23 +00:00