407d63b431
mac80211: fix compile error on rt2x00 when buildin for SoC
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:46 +00:00
f1b4824c86
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:37 +00:00
d2642de749
lantiq: Tune the XWAY subtarget cflags
...
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:15 +00:00
1c19298315
lantiq: set mips16 support.
...
Set mips16 support in XWAY subtarget.
This patch is based in changeset #36600
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:07 +00:00
94d75044c4
lantiq: Fix ARV7518 DTS definitions
...
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:03 +00:00
1b9e69e5a8
base-files: module loading is now handled by ubox/kmodloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:59 +00:00
bd2c9d64a6
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:55 +00:00
5fe321461a
base-files: drop 2 pointless hotplug trigger stubs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:51 +00:00
623e6025a8
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:47 +00:00
02f1075b0a
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:43 +00:00
dd3bdf1617
base-files: procd is now the init process
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:38 +00:00
c37af8ea6a
busybox: procd is now the init process
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:30 +00:00
97520d989f
base-files: procd init is now the default, remove files.old
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:26 +00:00
422c9d08dc
procd: update to latest git revision
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:22 +00:00
7d60f42c2e
procd: fix hotplug rule to not return on default makedev trigger
...
this allows the subsystem trigger to also be called
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:19 +00:00
d88dd83d90
brcm47xx: dont manually insmod switch drivers
...
Signed-off-by: John Crispin <bloic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:15 +00:00
ce0ccca1f7
ar71xx: drop procd_init console hack
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:11 +00:00
eaa7932386
hostapd: remove old button hotplug script
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:07 +00:00
d9da5fe227
ubox: update to latest git version
...
add block mount / extroot support
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:03 +00:00
7664baab52
block-mount: drop package, ubox now does the job for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:00 +00:00
11b33f6d64
hotplug2: procd does the hotplugging now
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:52:56 +00:00
6501c4d0da
util-linux: move package to package/system/utils
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:52:52 +00:00
b7ca061d02
util-linux: fix endianess bug and stage libraries properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:52:48 +00:00
abf153ccd0
libubox: update to latest version, fixes utf-8 corruption issues in blobmsg_json
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 15:19:31 +00:00
85abb58578
ath9k_htc: fix idle mode handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 10:57:35 +00:00
d20937ac5b
[ppc40x]: increase kernel partition size to fix boot issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 10:57:05 +00:00
28f17b5ff9
6relayd: Fix DHCPv6-PD assignment logic
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 06:15:09 +00:00
6fe1c0b459
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
...
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-20 18:47:36 +00:00
65914db872
mac80211: add rt2x00-mmio package to store the common parts for SoC and PCI access
...
This should fix a build error on ramips.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-20 15:03:28 +00:00
1183ac2997
ath9k: fix cabq depth accounting
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-20 13:10:31 +00:00
71915880cd
acx-mac80211: make it compile with the new backports mac80211
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 21:37:56 +00:00
7c6fb560a9
mac80211: libertas-sd depends on mmc
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 21:36:52 +00:00
4b4690d27e
mac80211: copy the backport-include files to staging_dir
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 21:36:22 +00:00
f8295a8ac6
mac80211: do not use CPTCFG_SSB and CPTCFG_BCMA
...
ssb and bcma are not build by compat-wireless / backports and the
config symbols are also not taken from there. Use the in kernel config
symbols. This fixes a build error in brcmsmac/led.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 21:33:31 +00:00
5a1584f8d9
mac80211: do not build RT2X00_LIB_XXX when XXX is not available in the kernel.
...
It was possible to select RT2X00_LIB_PCI without PCI being selected.
This closes #13720
mrkiko thanks for testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 21:29:34 +00:00
ae618e0e3e
6relayd: correctly set downstream routes for DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-19 13:08:33 +00:00
79d96c9361
linux-3.8: backport a leds-gpio.c crash fix ( fixes #13721 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 22:23:38 +00:00
40f43fbb47
tools/mkimage: add back a fixed version of 040-include_order.patch to fix build errors on some systems ( #12232 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 21:53:46 +00:00
3ce3b38c70
netifd: update to latest version, fixes a NULL pointer deref bug
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 16:24:48 +00:00
85f4e54cbe
firewall: update to git head
...
- fixes misprocessing of unknown symbolic protocol names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 14:30:51 +00:00
b403f780e9
firewall: update to git head
...
- fixes calculation of IPv4 netmasks derived from 0.0.0.0/0 CIDRs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 14:14:35 +00:00
a84a14bb3b
odhcp6c: Add option to override interface identifier in RA-client
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 12:51:14 +00:00
fcf2609605
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:54:28 +00:00
4c0b484f86
brcm63xx: provide a default sane MAC address for Cable Modem devices
...
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:54:24 +00:00
9a035029ca
libubox: update to latest version, fixes uloop recursion issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:52:40 +00:00
05d17a1895
ustream-ssl: update to latest version, fixes uhttpd infinite loop issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-18 10:52:33 +00:00
23a7a4a036
brcm63xx: create initramfs HCS images
...
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 22:57:04 +00:00
28aeb64578
netifd: IPv6: Fix sorting order in last commit.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 21:29:14 +00:00
89fe8241e4
netifd: Satisfy IPv6 assignments ordered by prefix length
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 21:16:22 +00:00
9e3b17277e
brcm63xx: simplify HCS image creation
...
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-17 19:32:56 +00:00
John Crispin
Felix Fietkau
Imre Kaloz
Steven Barth
Florian Fainelli
Hauke Mehrtens
Jo-Philipp Wich