704e2ed39d
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-27 19:58:31 +00:00
103893f67e
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-05 20:58:59 +00:00
276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
0d1596f2c8
mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:18 +00:00
513d4fc9c9
mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:13 +00:00
66fd7561b3
mcs814x: remove PCI code
...
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-17 14:33:07 +00:00
61de74b7f5
mcs814x: implement MULTI_IRQ_HANDLER
...
Allows us to get rid of the IRQ entry point assembly
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:47 +00:00
4ac0d0408c
mcs814x: use the standard device tree binding to represent a PHY node
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-16 22:25:41 +00:00
d8c155dfc9
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18 12:42:53 +00:00
bf21e3818d
target: enable XZ BCJ decompressor code after r35097
...
Required to actually be able to mount squashfs xz compressed
filesystems.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14 16:34:25 +00:00
b0df2719d6
[mcs814x] do not call clk_put() on the timer clock
...
We don't support disabling the clock, but this is actually what it would do.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27 18:42:36 +00:00
da918e3b88
[mcs814x] do not list specific board compatible strings
...
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27 18:42:32 +00:00
2ed6a26a63
[mcs814x] remove unused variables from Makefile.boot
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-27 18:42:28 +00:00
e910e78dba
[mcs814x] nuport-mac: various fixes
...
- properly check for the link up condition in the phylib adjust callback
- do not assign skb->dev, eth_type_trans() already does it
- handle skb allocation failures in the refill path
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-15 21:03:57 +00:00
f004690f1a
[mcs814x] more convertions to {read,write}_relaxed I/O accessors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-03 16:10:47 +00:00
1b0eab1729
[mcs814x] add wmbus-repeater to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:56:50 +00:00
1cd6db74ac
[mcs814x] enable multicast and advanced ip routers configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:53:34 +00:00
c0a7d5c938
[mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 20:50:20 +00:00
df1e2bf058
generic: move GENERIC_PWM symbol into the generic config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13 06:38:31 +00:00
2daf0ae204
[mcs814x] use the recommended ARM I/O accessors
...
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08 09:51:05 +00:00
de8a1fe701
[mcs814x] add some ohci workarounds to make ohci work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05 20:19:29 +00:00
e6b1ba9d19
[mcs814x] enable CFI command set 0002 FORCE_WORD_WRITE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:51 +00:00
b1e622e776
[mcs814x] pad squashfs image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:46 +00:00
c5fa46dc5f
[mcs814x] add Generic and dLAN USB Extender profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 20:25:40 +00:00
a7b6531eea
[mcs814x] nuport-mac: disable MAC RX and TX during interface close
...
Fixes sporadic crashes while reconfiguring the network interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03 10:26:01 +00:00
11293837c8
[mcs814x] MCS8140 actually selects CPU_ARM926T
...
Should make inclusion for other MCS814x SoCs easier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-14 16:19:30 +00:00
e3d76e51c1
[mcs814x] only support 128KiB erase block sizes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:56:09 +00:00
8ace79f63d
[mcs814x] disable PCI support
...
None of the boards we support have PCI connectors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:56:00 +00:00
9aa2b5a4ec
[mcs814x] strip a bit more the kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:51 +00:00
4996999295
[mcs814x] properly advertise OHCI and EHCI capabilities
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:41 +00:00
c8edb6e5cc
[mcs814x] change partition names to be more in line with other OpenWrt devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:30 +00:00
7c6523e2fb
[mcs814x] generate upgrade files suffixed with filesystem type
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-11 12:55:15 +00:00
332fbc08a1
[mcs814x] nuport-mac: delay call to napi_start() until fully able to process RX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 07:04:21 +00:00
c4f48de8cc
[mcs814x] set a compatible command-line to boot from flash
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10 07:04:16 +00:00
8e1f8a2085
[mcs814x] nuport-mac: use dma_mapping_error() instead of checking pointers
...
Thanks Gabor for spotting this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-09 09:06:35 +00:00
9ded359521
[mcs814x] nuport-mac: rework PHY interrupt configuration to avoid races
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:18 +00:00
6f503e42e0
[mcs814x] nuport-mac: close possible race condition during start
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:13 +00:00
8aa941f17a
[mcs814x] nuport-mac: unmap the DMA buffer when closing device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:09 +00:00
c447469124
[mcs814x] nuport-mac: check dma_map_single address return values
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:04 +00:00
bd676f181a
[mcs814x] build a Devolo dLAN USB Extender specific image
...
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:51:00 +00:00
e0ed3cba8d
[mcs814x] cleanup image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-08 21:50:55 +00:00
a8facfad2a
[mcs814x] nuport-mac: properly protect the phy interrupt handler
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-02 18:13:17 +00:00
677ee8449a
[mcs814x] add missing netmask to the network config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 22:09:13 +00:00
031b03b3dd
[mcs814x] assume the link is up and full-duplex by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 21:56:54 +00:00
bf2807bdf2
[mcs814x] add a default and suitable network config file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 21:56:49 +00:00
fb8c91abdd
[mcs814x] resync defconfig enable XZ compression
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-01 12:01:27 +00:00
df6b8c9431
[mcs814x] properly generate squashfs, jffs2 and initramfs images and kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 23:09:50 +00:00
d85b408d9b
[mcs814x] set DEVICE_TYPE to other to avoid pulling unecessary packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:10:03 +00:00
b6ea2c7d2e
[mcs814x] add compatible property to pci node
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 14:09:40 +00:00
Florian Fainelli
Jonas Gorski
Steven Barth
Jo-Philipp Wich
Gabor Juhos