3142770104
fix description for lantiq target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 17:37:57 +00:00
73fb225fd0
ramips: merge 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:10 +00:00
917bc25cb5
ramips: remove 2.6.37 stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:09 +00:00
665f2f5c28
ramips: switch to 2.6.39.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:07 +00:00
87fd3971df
ramips: add 2.6.39 support
...
Based on the patches from #9625
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:06 +00:00
3b2610cbf5
ramips: add hotplug script to extract eeprom for the rt2x00 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:01 +00:00
e81daf7520
ramips: specify eeprom file name on RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:02:00 +00:00
ebbad38d27
ramips: specify eeprom file name on RT288X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:59 +00:00
d7ae6a02cf
generic: add rt2x00_platform.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:57 +00:00
3f5722f308
ramips: add all supported boards to lib/ramips.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:56 +00:00
73ade95610
ramips: check the size of the uImage in image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:55 +00:00
40c6970c30
ramips: use lowercase partiion names on the WCR150GN board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:53 +00:00
00b5a5f8ad
ramips: use different partition names in the DIR-300-B1 image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:52 +00:00
a99c1d5c69
ramips: force word write on flashes with AMD cmdset ( #9252 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:51 +00:00
420a1bc0f7
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:49 +00:00
8ac8cc88eb
ramips: consistently use 'firmware' name for sysupgrade partitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:48 +00:00
356abe23cf
ramips: fix a section mismatch warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:46 +00:00
e324614143
ramips: remove unused include from the common GPIO code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:44 +00:00
25af94c585
ramips: disable watchdog on sysupgrade
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:43 +00:00
9c99259af6
ramips: swap target check in image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:42 +00:00
0e8f2c6cc6
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:41 +00:00
46cc717148
ramips: set cp0_perfcount_irq for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:40 +00:00
8a6ddb7ebf
[x86] target/patches: This has been sent upstream, but might not appear for a couple of weeks.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27373 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:20:04 +00:00
90f49c4e72
[x86] target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:53 +00:00
1e6c89025a
[x86] Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
...
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:51 +00:00
a661e5a1a8
Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:48 +00:00
fcee088c70
The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
...
Include this on Geos.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 02:59:00 +00:00
b56e4c784a
ar71xx: use 4k image only for the AP121 board
...
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 08:37:59 +00:00
60e1ac985f
[cns21xx]: cns21xx belongs to the Econa family, too
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 08:31:25 +00:00
4be0dd3b96
[etrax]: mark it broken
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 07:26:04 +00:00
5b13d0ebc8
[ar71xx] revert r27043 ( #9513 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:52:57 +00:00
dea51bb2f8
[ar71xx] revert r27341, it introduce wrong behaviour for other models
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:15:45 +00:00
08a25a3b26
[ar71xx] turn status LED off if device finished initializing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 18:39:53 +00:00
4499d09000
[avr32]: upgrade avr32 u-boot to 2011.06
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 11:32:01 +00:00
362b3e2231
[avr32]: upgrade to 2.6.39.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 11:31:08 +00:00
728809f04b
[cns3xxx]: preliminary 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 08:15:48 +00:00
0025637591
[target/generic/3.0]: add missing kernel symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 08:11:16 +00:00
efea8a29c9
fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 03:20:13 +00:00
2e69406167
ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
...
The config option has been removed in 2.6.39.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-30 12:15:33 +00:00
dcd4203ae6
brcm47xx: deactivate wndr3400 for now as this device will not boot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 17:42:34 +00:00
5af777bdf1
ar71xx: merge 2.6.39 patches
...
Also remove the old UART driver for ar933x.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:37 +00:00
ba7d104b8a
ar71xx: remove 2.6.37 support as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:36 +00:00
e3ddb93897
ar71xx: remove 2.6.38 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:34 +00:00
66550a7032
ar71xx: switch to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:33 +00:00
f15a427a56
ar71xx: add 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:32 +00:00
40dfb136e7
ar71xx: remove ar71xx_gpio_irq_set_type
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:30 +00:00
551199f23d
ar71xx: add separate handlers for IP3 interrupts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:29 +00:00
7253ea2cf7
ar71xx: use separate handlers for IP2 interrupts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:28 +00:00
4ef13c03c0
ar71xx: remove useless irq_desc.status initializations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:27 +00:00
2d2fa7b6ed
generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:25 +00:00
029d55e761
brcm47xx: generate image to flash on Netgear WNDR3400.
...
The image will not boot because serial flash support is missing this is only for experts.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 22:23:21 +00:00
bf2c750b45
brcm47xx: add initial support for devices with bcma bus.
...
Ethernet and wifi are not working and this is highly experimental.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 22:21:57 +00:00
b1e50c66ea
kernel: refresh patches for kernel 3.0-rc5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 20:25:39 +00:00
9920424969
kernel: update ssb and bcma to linux-next next-20110628
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 19:33:50 +00:00
210af3e57c
kernel: update kernel to 2.6.39.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 19:30:58 +00:00
fe98667990
[cns3xxx]: ethernet cleanup and sata fix - thanks, Chris
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 06:54:20 +00:00
ca52517f61
brcm47xx: update kernel to version 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 21:29:20 +00:00
b5051f91ff
kernel: update ssb and bcma to linux-next next-20110627
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 21:28:40 +00:00
c866064533
brcm47xx: fix Linux-3.0 and fix clock rate detection.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 20:20:11 +00:00
3656bcaeb2
kernel: update ssb and bcma to linux-next next-20110627
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 20:18:49 +00:00
9f22101e62
[geos] remove remaining uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 01:42:31 +00:00
7df7c99364
[x86] geos: deprecate uci-defaults files
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:10 +00:00
af4c306ce6
[x86] alix2: add config files for bridging
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:05 +00:00
fa61065873
[brcm63xx] remove gpiodev, prefer sysfs gpio
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 19:26:17 +00:00
42b46dbbd5
ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:54:42 +00:00
1ce73d5bde
ar71xx: bring up secondary radio on wzr-hp-ag300h ( fixes #9608 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:48:47 +00:00
3958942342
[kernel] add missing linux-3.0 config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 11:43:30 +00:00
d72a90ee7b
[brcm63xx] register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-22 12:32:03 +00:00
16a2b890cf
[brcm63xx] fix tab damage in 141-led_count.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:58 +00:00
a104f95d05
[kernel] fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:53 +00:00
ef4775df74
kernel: refresh patches for kernel 3.0-rc4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 18:39:47 +00:00
46c6ee1ca7
[brcm63xx] use macros to generate SPI registers table and switches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 10:05:51 +00:00
585c56bd1a
[adm5120] fix usb mis-cleanup after r27162 ( #9581 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 10:04:53 +00:00
545cdca68e
[x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 23:05:21 +00:00
6f3abd061e
[PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+
...
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 22:48:53 +00:00
d2e81efd80
[brcm63xx] dev-spi.c checks for running CPU, not board code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:46:00 +00:00
35faebfc51
[brcm63xx] fixup patches after r27234
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:28:38 +00:00
333e68fdfd
[brcm63xx] remove accidental bcm6345 related patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:16:59 +00:00
f41477ce57
[brcm63xx] remove support for 2.6.37 and 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:14:22 +00:00
0103e97008
[brcm63xx] switch to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:12:45 +00:00
d55db8855e
[cobalt] remove 2.6.35 and 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:40 +00:00
4a130bc193
[ep93xx] remove pre 2.6.39 patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:00 +00:00
a057bc3de3
[au1000] remove 2.6.37 patches and config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:07:26 +00:00
191ba94ca2
ar71xx: cleanup AR933X UART driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:51 +00:00
3436ce6c87
ar71xx: fix uart clock frequency for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:50 +00:00
8382dd4891
brcm47xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:53:14 +00:00
791f4d23e2
kernel: update to kernel 2.6.38.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:52:15 +00:00
cbd8113c9f
brcm47xx: add support for kernel 3.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:24:44 +00:00
cc68b18430
ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-17 11:22:22 +00:00
6808613101
[kernel] add missing USBIP_CORE item in config-3.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:50 +00:00
5102806324
[malta] allow any console to be used
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:44 +00:00
ab7d434b54
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:40 +00:00
a3c7fb6d39
linux/generic: Add support for 3.0-rc3
...
Also make linux identify itself properly as 3.0, not 3.0.0.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 21:31:01 +00:00
45622e7d60
bcm47xx: Remove kernel checks from image Makefile
...
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 21:11:49 +00:00
d26464abb6
[PATCH] 2.6.39.1: missing kernel symbols
...
If you turn on I2C, you'll need this symbol defined.
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 18:18:32 +00:00
5b8400b5d9
add missing kernel config symbols for usb on powerpc
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 18:07:26 +00:00
4a25af3b0d
[generic] backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 14:11:33 +00:00
24551f6d23
[generic] revert r26997, it does not apply against 2.6.36.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 13:51:57 +00:00
52500996fc
[cobalt] switch to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:13 +00:00
e044b85889
[cobalt] fix diag.sh with qube2 front led
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:09 +00:00
0fb925e78a
[cobalt] resync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:03 +00:00
2ad9f05361
[lantiq]
...
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.
Ticket #9547
Signed-off-by: Conor O'Gorman <conor at dna.ie>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 22:37:23 +00:00
86b69cccdc
[uml] replace unfortify patch with a better one
...
Thanks to Richard Weinberger for providing this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 12:45:12 +00:00
ebf969e6ef
ar71xx: use ar933x_uart.h in the AR933X serial driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 08:12:40 +00:00
f6d3520a90
ar71xx: update early_printk code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 08:12:38 +00:00
3d41f1652c
[adm5120] cleanup files using checkpatch.pl
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12 19:17:57 +00:00
e71f7633f7
[lantiq]
...
* move patches around
* add basic support for gigaset sx76x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12 08:56:26 +00:00
5bc0fb0253
[ar71xx] Remove trailing spaces, convert spaces to tabs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 19:30:50 +00:00
4d115d3804
[ledtrig-netdev]
...
we dont need 1024 bytes buffer. 128 bytes is enough.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 07:08:54 +00:00
fe5712255b
[atheros]
...
* revert accidental config change
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 05:10:18 +00:00
e558a1dec9
[lantiq]
...
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-08 17:57:55 +00:00
a7be639630
ar71xx: override inittab to enable login on ttyATH0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 17:07:10 +00:00
706c2323f0
[ep93xx] update to 2.6.39.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:14 +00:00
074247f869
[ep93xx] define UIMAGE for various rootfs targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:09 +00:00
8538c5d738
[ep93xx] use IMG_PREFIX for image name
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:04 +00:00
9378a9a8b4
[kernel] add more config symbols to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:00 +00:00
525ed5fc52
[uml] update to 2.6.39.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:26:54 +00:00
fbba97cc8b
[realview] update to 2.6.39.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:09 +00:00
e8ff7031dd
[malta] update to 2.6.39.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:05 +00:00
9a1730ac41
[kernel] add some missing 2.6.39 config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:00 +00:00
c8baad652d
[kernel] update to 2.6.39.1
...
patch from Peter Wagner
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:35:55 +00:00
552f0d1870
ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 12:30:10 +00:00
e21993eca6
ar71xx: select the internal antenna by default on the ZCN-1523H boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 12:30:09 +00:00
1184342f70
[au1000] update to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-02 13:45:20 +00:00
17d0d1aa06
Revert "ar71xx: only enable the rx engine after the link is up..."
...
It messes up the DMA state when the link goes down
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 18:15:43 +00:00
83cac6285d
ar71xx: init external_reset for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:30 +00:00
d2f1b74fdf
ar71xx: add external_reset field to ath9k_platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:28 +00:00
f3e2f1b8ba
ar71xx: init get_mac_revision on AR9330 rev 1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:27 +00:00
fe2f4cd7cc
ar71xx: add get_mac_revision to ath9k_platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:26 +00:00
c0f1df073d
ar71xx: export SoC revision
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:24 +00:00
6b89f2292c
[cns3xxx]: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 07:24:41 +00:00
a16a93621c
[cns3xxx]: fixup second led, patch from Chris
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 07:21:25 +00:00
d45f8cb7f6
ar71xx: add profile and image building code for wzr-hp-ag300h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:30 +00:00
7d86f5c169
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:26 +00:00
edb85626ef
fix a crash in mtd_concat when the .sync op is not implemented
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:22 +00:00
d94e059402
m25p80: add the chip id for the winbond w25q128 chip
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:18 +00:00
e8d8f5778b
[cns3xxx]: fixup pcie clock, thanks Chris
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 23:55:33 +00:00
2ca6db7bcb
ar71xx: build images for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:47 +00:00
5523ce3deb
ar71xx: add sysupgrade support for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:45 +00:00
3714608bb3
ar71xx: add default network config for the AP121 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:44 +00:00
627d352d70
ar71xx: add support for the AP121/AP121-MINI reference boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:43 +00:00
effd488adc
ar71xx: register UART for the AR933X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:42 +00:00
f16e2742f4
ar71xx: add serial driver for the AR933X UART
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:40 +00:00
57da5f9061
ar71xx: add WMAC initialization code for the AR933X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:39 +00:00
431a42fc3b
ar71xx: add ethernet initialization for the AR933X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:37 +00:00
032e6e7374
ar71xx: enable USB support for the AR933x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:36 +00:00
ec8c1d39e1
ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:35 +00:00
9a2d89381e
ar71xx: the watchdog uses the reference clock on the AR933x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:34 +00:00
2509e6a9dd
ar71xx: add AR933x specific glue code for IRQ initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:32 +00:00
949c26dd15
ar71xx: don't register 8250 UART on the AR933x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:31 +00:00
9f519d000a
ar71xx: enable GPIO support for the AR933x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:30 +00:00
63c4ff5ea4
ar71xx: add AR933x specific frequency initialization code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:29 +00:00
8fa9bf2dd7
ar71xx: add AR933x specific early_printk support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:27 +00:00
23388b4cd9
ar71xx: add preliminary support for the Atheros AR933x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:26 +00:00
0518d27878
ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
...
NETGEAR doesnt produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.
This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.
There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:25 +00:00
e0d562138a
ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:22 +00:00
6f14177314
ar71xx: Fix header offset for newer WRT160NL models
...
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:20 +00:00
e7a7ee1db1
ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:19 +00:00
208eb6ab2e
ar71xx: reduce the size of the squashfs-4k binaries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:18 +00:00
3097d45727
ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:15 +00:00
a89ae2138b
ar71xx: sync ath9k_platform_data.h with compat-wireless
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:14 +00:00
8a367348f9
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:13 +00:00
f6cccf1487
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:12 +00:00
a45026d4cb
ar71xx: ag71xx: make ring sizes configurable via ethtool
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:10 +00:00
4d55ed1dc2
ar71xx: ag71xx: prepare to make ring sizes configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:09 +00:00
abc7b65d39
ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
...
Reported-by: Dave Täht <dave.taht@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:07 +00:00
e53d127fa4
x86: add additional companion chip drivers to alix2 and geos
...
Add the MFGPT high precision timers, and integration into the schedule (clock events).
Use OHCI, not UHCI usb module.
Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 16:57:05 +00:00
5c83d117df
x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
...
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 16:57:01 +00:00
98395298e5
purge out CONFIG_CRYPTO* symbols out of target specific kernel configs
...
since OpenWrt is taking care of them
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 09:47:30 +00:00
424bed8c19
ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:08:01 +00:00
f3431736d5
ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:07:57 +00:00
2815868d4a
[cns3xxx]: upgrade to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 13:55:34 +00:00
9af744afe8
[lantiq]
...
* backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-29 21:19:26 +00:00
8cdbf2c4b6
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:52 +00:00
8dbfe7ca11
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:48 +00:00
e95dc4b5c1
[brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:53:00 +00:00
f1e6eb88e8
[brcm63xx] renumber patches accordingly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:52:56 +00:00
9601ce7e1f
[brcm63xx] renumber board patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 12:09:15 +00:00
c64a3e912a
kernel: exportfs: reallow building as a module
...
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.
see: https://patchwork.kernel.org/patch/812832/
Thank you Jonas Gorski for the patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 20:57:13 +00:00
7967debb9c
kernel: generic: Update 2.6.39 to final
...
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:51:40 +00:00
22ca381be8
kernel: some updates for kernel 2.6.39
...
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile
Thank you Peter Wagner for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:32:00 +00:00
0dbe62a718
brcm47xx: initial 2.6.39 support for brcm47xx
...
Thank you Peter Wagner for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:27:08 +00:00
e15963161a
[kernel] fix mtd warnings
...
Fixes for the following warnings:
drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type
In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:16:58 +00:00
7cd58d14eb
brcm47xx: remove old kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 18:05:54 +00:00
bee045c2a0
brcm47xx: fix partition layout on SimpleShare devices.
...
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.
This fixes #9323
Thank you Will Holmes for the patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 17:46:34 +00:00
5171c48102
[generic] Clean up patch not applying
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24 10:00:36 +00:00
195f49f69c
[brcm63xx] add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:25 +00:00
c24a32df6f
[brcm63xx] add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:22 +00:00
4b5cddfaca
[brcm63xx] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:18 +00:00
a6aa5507e7
[brcm63xx] add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:15 +00:00
a43c6cd743
[kernel] refresh 2.6.37 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:11 +00:00
764614896e
[brcm63xx] add support for BT Voyager 2500 ( #9070 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:07 +00:00
05bf83accb
[brcm63xx] add support for USR9108 LEDs ( #9372 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:04 +00:00
d4f8185d02
[ar7] add GT701 LEDs support ( #9382 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:00 +00:00
09f509497a
Simple typo for kmod- prefix in alix2 target makefile.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-19 04:29:40 +00:00
09e9c43c04
[omap35xx]: Remove override of max80211.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18 12:43:54 +00:00
994f5af4f0
[omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18 11:50:36 +00:00
a1ea2a188d
ar71xx: don't probe the LAN PHY
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:15:24 +00:00
c4c0ffb506
ar71xx: detect link on LAN ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:12:56 +00:00
f7044753af
[x86]
...
* adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 10:35:14 +00:00
60972ff36c
kernel: backport some ssb changes to support a mac80211 update
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-16 21:50:20 +00:00
2e938d5bb2
[generic] remove an accidentally copied comment from the option.ko device patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 21:28:12 +00:00
f1c0febd72
[generic] add definitions for Alcatel X220D and Huawai E173s to option.ko ( #9422 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 19:17:31 +00:00
f708e80573
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
...
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 17:23:02 +00:00
034b97f4d8
ar71xx: add link detection on Ubiquiti devices WAN port
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:31:50 +00:00
4fb23de559
use correct macros and frame size in ag71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:10:06 +00:00
7c9631696d
ar71xx: cosmetic fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:08:00 +00:00
ec135c3d34
[omap35xx]: Add new defconfig and profile for es variant
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 11:49:52 +00:00
4a58fa4ef6
[omap35xx] Squash uids
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 10:36:39 +00:00
7072b9d11f
[x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 07:23:11 +00:00
685efe5852
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 06:08:49 +00:00
6c5f918ef1
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 06:06:42 +00:00
0da640db3b
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:34:14 +00:00
93e4186e52
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:50 +00:00
bc014cb9cd
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:45 +00:00
2811523f2c
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:41 +00:00
71dba15746
[ep93xx] switch to 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:34 +00:00
78b21fc25c
[kernel] add missing 2.6.38 touchscreen config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:30 +00:00
3a033d5456
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
...
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09 15:21:58 +00:00
e7461a36ae
ar71xx: populate LED3 on the JA76PF board
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:51 +00:00
8dd1a353b7
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:49 +00:00
9ebade84cf
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:48 +00:00
5c94b9df01
ar71xx: remove superfluous fifo_cfg overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 21:38:46 +00:00
7775f5339e
[PATCH] ipv6: restore correct ECN handling on TCP xmit
...
Thanks Dave Taht
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 17:08:06 +00:00
c7cf7f306b
ar71xx: ag71xx: make switch register access atomic
...
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 16:32:53 +00:00
2d8d374be2
ar71xx: ag71xx: fix section mismatch warnings
...
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:36 +00:00
0e24dd9f57
ar71xx: ag71xx: fix build error if debugfs is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:26 +00:00
08d7c16622
brcm47xx: update patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:49:17 +00:00
6373429682
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:34 +00:00
c37636c223
ar71xx: ag71xx: add timestamps to ag71xx_buf
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:28 +00:00
3c6c9f5866
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:26 +00:00
24b135c75c
ar71xx: ag71xx: use debugfs_remove_recursive
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:25 +00:00
a0ea29bf0a
ar71xx: override wmac device name for the AR934x SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 09:23:32 +00:00
67257aaa61
[ar7] remove useless patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-06 12:37:40 +00:00
b8f0b2b785
[kernel] fill maintainer infos for a couple of targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-06 12:37:36 +00:00
d9e9760f26
[malta] update to 2.6.38.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 16:35:44 +00:00
413bc6bef5
[kernel] add missing 2.6.38 symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 16:35:40 +00:00
580cad4b9b
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 14:05:21 +00:00
cf2a2e3ae2
brcm47xx: fix typo in patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 13:18:35 +00:00
24dc829d59
linux/ar71xx: add some missing symbols for nand/yaffs targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 07:19:46 +00:00
1a12aca40b
linux/generic: port yaffs to 2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04 09:35:06 +00:00
65d3f379ba
linux/rb532: use kernel and initramfs tags on image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04 08:47:00 +00:00
27f90228a7
[PATCH] geos: remove unneeded modules
...
The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03 21:18:12 +00:00
d78ee5b5be
[uml] update to 2.6.38
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-02 07:57:25 +00:00
b7a045a261
cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-02 00:28:30 +00:00
a6d76eb003
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-01 20:28:35 +00:00
ab43a6807e
cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-01 15:53:56 +00:00
bb19fcc01c
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 21:27:42 +00:00
a07b48aa05
ar8316: automatically detect whether port4 is used as PHY or as a switch port
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 21:27:37 +00:00
46b7759b8d
ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 19:30:49 +00:00
25ba52f012
ar8216: support AR8316 rev 0 devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-28 19:30:43 +00:00
2b26ad5fa3
linux/atheros: add 2.6.38 preliminary support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-27 17:18:03 +00:00
e0cb25837f
swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK
...
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-26 23:05:29 +00:00
97ee5a6724
linux/adm5120: update wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 13:18:33 +00:00
4665b24467
linux/ar71xx: update wget2nand script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 12:38:25 +00:00
9e885676d4
linux/ar71xx: add 2.6.38 preliminary support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-21 11:45:23 +00:00
b8430a83f7
uml: fix the kernel config name override
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 21:47:49 +00:00
9ad5c69e80
x86: remove 2.6.35 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:50 +00:00
026165ed70
brcm63xx: remove patches/configs for 2.6.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:46 +00:00
2a894af942
au1000: remove patches/configs for 2.6.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:42 +00:00
0a2d4909e8
ar7: remove patches/configs for old kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:38 +00:00
8811fd4b11
adm5120: remove patches/configs for unused kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:32 +00:00
d49cb1d62f
rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs.
...
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:32:28 +00:00
6431cd0853
Remove 2.6.35. It's not used anymore.
...
Signed-off-by: Jochen Friedrich <jochen@scram.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:32:21 +00:00
2bfbe9f602
[brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 01:15:47 +00:00
6a55f27446
ixp4xx: backport an upstream commit to fix gspca compile errors triggered by the buildbot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 21:30:48 +00:00
c99fe163b0
fix a typo in the kernel patch description
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 18:40:23 +00:00
bb7cacb10f
kernel: reorganize 2.6.37 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 18:31:21 +00:00
c19a05ddc7
kernel: reorganize 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 18:31:05 +00:00
80a4ffa1e2
kernel: reorganize 2.6.38 patches, clean up block2mtd patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 18:30:57 +00:00
a055978522
kernel: add a PATCHES text file describing the new patch categories
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 18:30:51 +00:00
f88701b528
kernel: backport the fix "net_sched: fix ip_tos2prio" for 2.6.37
...
Fixes a bug that led to ECN enabled flows being de-prioritized by pfifo_fast
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 01:46:57 +00:00
7c6472a3db
[brcm63xx] Generate images for RTA1320_16M-based routers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 14:31:36 +00:00
b2ae50ed27
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 12:18:25 +00:00
9c505aa1f6
x86: missing kernel symbols
...
Please include these two missing kernel CONFIG_ symbols.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 04:56:49 +00:00
2e51480498
geos: Add PC speaker to kernel definitions
...
Add the PC speaker back to the Geos platform.
Add DMI support in BIOS.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 04:51:05 +00:00
a2f3d92663
adm5120: fix promiscuous mode handling (patch from #8581 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 00:20:59 +00:00
548b5b8921
ar71xx: enable the ip17xx PHY driver ( fixes #5193 , #8027 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-14 23:51:12 +00:00
eb9cdf6ae6
linux/adm5120: generate non-initramfs kernel images too
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-14 09:59:13 +00:00
1788923d17
linux/adm5120: preliminary 2.6.38 config options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-13 16:47:26 +00:00
8f846b5f2e
linux/adm5120: add 2.6.38 preliminary support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-13 16:42:03 +00:00
be846d62fe
ar71xx: replace the madwifi profile with an ath5k profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 21:10:45 +00:00
af192f49ce
[x86] gzip jffs2 images
...
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 20:48:47 +00:00
4c7ebaeff5
Enable padding of jffs2 images to user specified filesystem size
...
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 20:46:34 +00:00
4423030e55
solos: various upstreamed solos patches
...
These patches were submitted to netdev and will likely be out in 2.6.38.3.
In the meantime, they're needed in 2.6.37.6.
Patch by Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 19:50:15 +00:00
62100399e3
generic: Add support for 2.6.39
...
Add support for 2.6.39 based on rc3. Runtime tested on bcm63xx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 19:39:20 +00:00
e42bcaa50e
[omap35xx] Change partition table layout
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 14:16:32 +00:00
1a56f54c77
ar71xx: fix build error w/o CONFIG_PCI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 13:14:56 +00:00
29f15e70ca
ar71xx: don't hardcode console parameters in kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 13:14:53 +00:00
1fa235abdc
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:21 +00:00
fa7cdb26c4
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:10 +00:00
6c38894393
generic: rtl8366{s,rb}: remove the PHY driver.
...
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12 09:29:07 +00:00
08862255f8
generic: add support for the MX25L1606E SPI flash
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 17:37:13 +00:00
6f6bb8acd1
ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 17:37:08 +00:00
f529b06394
ar71xx: fix AR934X_WMAC_SIZE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 17:37:03 +00:00
58a05a1b96
atheros: use ath5k instead of madwifi
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 03:26:58 +00:00
3caff76cac
atheros: remove bogus wlan device mask checks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-11 03:25:59 +00:00
64b93ee3e9
[au1000] drop 005-au1000_phy_addr.patch, upstream is fixed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-10 18:25:56 +00:00
8c8c51f5d5
amazon: Upgrade amazon target to kernel 2.6.37
...
This was just a little bit tested on an SAMSUNG SMT-G3020 and pci and usb do not work like before.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-10 15:08:28 +00:00
f6e9af6f9d
at91: add some missing config options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09 23:36:26 +00:00
John Crispin
Gabor Juhos
Daniel Dickinson
Imre Kaloz
Jo-Philipp Wich
Felix Fietkau
Hauke Mehrtens
Florian Fainelli
Rod Whitby
Vasilis Tsiligiannis
Mirko Vogt
Hamish Guthrie
Matteo Croce
Travis Kemen
Alexandros C. Couloumbis