Felix Fietkau
fd4ddfd240
add preinit modularization work by Daniel Dickinson (cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
Jo-Philipp Wich
6392c009d2
[brcm-2.4] add support for OvisLink WL-1600GL
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-21 23:48:23 +00:00
Felix Fietkau
37216e75b4
add WRT300N v1.1 support (patch from #6379 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-24 10:58:09 +00:00
Jo-Philipp Wich
06f69358e6
[brcm-2.4] fix typo in switch config migration script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-05 12:39:28 +00:00
Jo-Philipp Wich
d28b1e9d75
[brcm-2.4] add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-15 23:19:39 +00:00
Jo-Philipp Wich
48b86bd36e
[brcm-2.4] change switch config to swconfig style format to remain consistent accross platforms
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-15 18:43:46 +00:00
Andy Boyett
1cef2e5054
[brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-01 01:09:56 +00:00
John Crispin
ef50787039
make etehrent work on wrt350n, thx sn9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 21:26:36 +00:00
Felix Fietkau
cc1804f719
Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)
...
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16 18:14:29 +00:00
Felix Fietkau
af309feb53
rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-04 09:35:55 +00:00
Felix Fietkau
d8d22d5816
Asus WL-330gE Support
...
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.
Signed-off-by: David Cooper <dave@kupesoft.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 18:45:39 +00:00
Gabor Juhos
1c27b38613
[brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network configuration ( closes #2788 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26 16:10:44 +00:00
Felix Fietkau
0c1bbd505a
(3/6) bcm57xx: preinit
...
This patch allows the bcm57xx module to work correctly with failsafe mode.
insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately. This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.
The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.
Tested on wrt350n.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:10:13 +00:00
Felix Fietkau
7675a31a53
(2/6) bcm57xx: netconfig
...
Update the netconfig script to support boardtype 0x478. I've tested this
on the wrt350n, hopefully it will match the 600n as well.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:09:49 +00:00
Travis Kemen
d62655369c
This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-08 01:30:14 +00:00
Andy Boyett
1e63aa3206
Add support for the WL-500gP v2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31 08:04:56 +00:00
Florian Fainelli
e1826d74ea
Add back Sitecom WL-105b support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-08 14:27:48 +00:00
Gabor Juhos
9233c3cdb9
get rid of per-profile base-files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-29 14:27:54 +00:00
Tim Yardley
3249931be4
commit profile support for base-files... patches still need to be done
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-02 18:17:40 +00:00
Felix Fietkau
599cf4f524
Add WL-700gE support (based on work by jr)
...
Includes kernel/diag patch and a new target profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-20 12:35:00 +00:00
Felix Fietkau
14b000385c
don't exit from failsafe mode after the console shell quits (some devices don't have /dev/console)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-07 17:38:29 +00:00
Felix Fietkau
2202b0ef1e
add a netconfig override for the wl-500g ( fixes #1116 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-07 15:41:47 +00:00
Felix Fietkau
b5a7213ae4
better network config support for bcm94704
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-12 23:55:14 +00:00
Felix Fietkau
0cbe723631
move platform specific base-files into target/linux/<targetname>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-22 23:27:29 +00:00