ff4567f7fe
Remove bogus zero-length ohci-ssb.c in generic-2.6/files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:55:06 +00:00
653cf2c078
enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29 12:55:44 +00:00
4bfaf896cb
allow bigger packets in the marvell switch (does not fix the mtu problems yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 21:59:06 +00:00
cc8a466cb1
fix vlan mapping for cpu port on the marvell switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24 01:09:47 +00:00
c29df87d31
clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23 16:28:05 +00:00
e62fdae016
Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 08:29:01 +00:00
3c2c1b1b69
Add stub driver for ADM6996F switches (configured through MII)
...
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 02:53:04 +00:00
04b8b09c2f
[package] move spi_gpio driver into the kernel, clean-up SPI modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-15 07:33:43 +00:00
a257340a3e
[kernel] modules/gpio-buttons: fix build error on older kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 11:49:22 +00:00
9ac8ae9d85
ssb-mips: Fix IRQ routing on the MIPS core.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 09:15:53 +00:00
546725acb2
[kernel] add a polled GPIO buttons input driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07 19:54:44 +00:00
c7393b9e65
GPIODEV: Fix open-count race condition.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19 11:32:08 +00:00
f1e06a1597
add new led trigger for network traffic, fixes #2776
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-07 21:25:02 +00:00
a5c9687c1f
ssb: Update to latest upstream version of ssb.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:24:18 +00:00
d3bbaf965b
b43: Make probing of NPHY devices possible.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18 22:21:29 +00:00
f165889337
"default-on" LED Trigger
...
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.
Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.
Particular thanks to Rod Whitby for all his help with this.
Signed-off-by: Nick Forbes <nick.forbes@incepta.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02 01:21:54 +00:00
b6ed86f4c2
add userspace tool for gpio_dev
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 04:24:05 +00:00
f346e7a030
remove binary file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:17:35 +00:00
bfa7d43bee
add generic gpio char dev for CONFIG_GENERIC_GPIO archs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:16:11 +00:00
613ab757a3
LED driver for PCEngines ALIX boards
...
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.
The driver is also added to the Alix profile.
Signed-off-by: Petr Liebman <petrliebman@gmail.com>
--
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-14 00:52:15 +00:00
851416db8a
Forgot removing that file while applying patch from #2757
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 17:52:27 +00:00
d2354353d1
make morse LED trigger available as a package, and fix it to compile with 2.6.23
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-20 14:32:13 +00:00
939d828c8f
sync ssb with upstream
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-14 02:47:36 +00:00
74840fb58d
back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:21:24 +00:00
0634c9c679
add patches for 2.6.23 on brcm47xx (not enabled yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:04:37 +00:00
eb77c1aa6e
add missing file from [9055]
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-28 20:08:55 +00:00
12aa23e200
Move SSB out of brcm47xx target into generic-2.6 target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-01 22:44:05 +00:00
Peter Denison
Felix Fietkau
Gabor Juhos
Michael Büsch
John Crispin
Florian Fainelli