026165ed70
brcm63xx: remove patches/configs for 2.6.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:46 +00:00
2bfbe9f602
[brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 01:15:47 +00:00
7c6472a3db
[brcm63xx] Generate images for RTA1320_16M-based routers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 14:31:36 +00:00
b2ae50ed27
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 12:18:25 +00:00
5fb18eaef8
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03 13:59:07 +00:00
5a76d52bf8
[brcm63xx] Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-31 06:16:23 +00:00
e844751afa
bcm63xx: Really fix the flash driver in 2.6.37
...
Read back the actual rootfs length from the image tag.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-07 16:55:01 +00:00
78f95daf33
[brcm63xx] fix patches after 2.6.37 update, patch from KanjiMonster
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-01 16:02:38 +00:00
7bfdfcc4bd
[brcm63xx] add support for 2.6.37, patches from KanjiMonster
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 19:59:22 +00:00
2ec15bd5be
[brcm63xx] add support for HW553 bcm6358-based boards ( #8844 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 15:44:06 +00:00
3cea035cac
[brcm63xx] add support for 'MAGIC' bcm6348-based board
...
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.
I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )
Thanks to KanjiMonster for the support on the IRC channel.
Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 12:44:27 +00:00
0a5005e824
[kernel] update to 2.6.35.11
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 12:44:16 +00:00
239a77ed96
[brcm63xx] fix T-Com Speedport W 500V default config
...
The device is called SPW500V, not SP500W.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-09 13:09:02 +00:00
405d9f27b2
[brcm63xx] fix build of brcm-wl
...
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-08 13:46:12 +00:00
4e2d90b5b8
[brcm63xx] give some credits to Tanguy Bouzeloc in the spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 02:11:08 +00:00
29481143bf
[brcm63xx] multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-29 16:19:59 +00:00
a6ec44df02
[brcm63xx] patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 08:10:32 +00:00
cec3802964
[brcm63xx] patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 04:05:04 +00:00
62f90595e1
[brcm63xx] spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 00:24:50 +00:00
ec103967cb
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:18:13 +00:00
dda75774e9
base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:18:04 +00:00
d93fac4436
mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:17:56 +00:00
16c44de3e9
[brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 18:59:58 +00:00
7b9da8d0b0
[brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:31 +00:00
de92064134
[brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:28 +00:00
374672d6c0
[brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:24 +00:00
75c9c63874
[brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 17:32:29 +00:00
b32148f92f
Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
...
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.
It belongs in generic not brcm63xx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 17:02:31 +00:00
cb1024cc90
[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T.
...
Thanks blunoise
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 16:42:23 +00:00
194d1e24c0
[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:54 +00:00
efe3905b6c
[brcm63xx] patches: Refreshed patches after led_count
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:51 +00:00
5ac34fd9f0
[brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:47 +00:00
903d1b5311
[brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:41 +00:00
5700d60a40
[brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 06:46:03 +00:00
6407278c23
[brcm63xx] board definition: Fixed CPVA642 LED definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 06:45:57 +00:00
a67ee8325d
[brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 04:31:23 +00:00
36114ce181
[bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 02:01:08 +00:00
9b5364abf2
[brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:13:00 +00:00
0c4e2c5526
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:44 +00:00
68981f5d8e
bcm63xx: Add board id override fixup.
...
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:40 +00:00
e96cc39f19
bcm63xx: Finalize support for DSL-274xB, rev C2.
...
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:36 +00:00
e21b57d529
bcm63xx: Allow 'colored' power leds.
...
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:30 +00:00
94a1adaf05
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
...
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:26 +00:00
f78d9eebba
bcm63xx: Add defconfigs.
...
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:19 +00:00
1ae1fb6b50
update to the latest stable kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 18:50:11 +00:00
ed589945f0
[brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 11:06:13 +00:00
53af0d5fbb
[brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 20:17:08 +00:00
4470bf532c
[brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-19 13:41:54 +00:00
caefcca898
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool.
...
* Rewrote commandline parsing code using gengetopt
- We now get long options
- We have more options including use of the info section for
board information (e.g. to add the same boardid but
different GPIOs on different routers)
* Added back the ability to write stock images (this is useful, for example,
when copying the firmware from the in-memory flash, and then being
able to create an image that will let you revert to/test stock firmware
* Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0)
* Added ability to use all sections of the imagetag, including custom magic
signatures (e.g. for the Telsey router I'm adding soon), info sections,
and reserved sections
* Added putting the router type (as defined in the image generating Makefile)
into the info1 section and the filesystem type in the info2 section.
This will be used by mtd (when I add the code) to return the name of
image used to flash this router. (As requested by Jo, as well as being
useful for same boardid different board scenario described above).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 06:46:53 +00:00
dcc7bd0d17
[brcm63xx] Add wps button on alice gate
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06 21:08:44 +00:00
a497060e39
update kernels to 2.6.32.25 and 2.6.35.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 09:01:08 +00:00
27c9658984
[brcm63xx] register uart driver on livebox ( #8013 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27 10:02:13 +00:00
b024c3f927
[brcm63xx] refresh 2.6.35 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27 10:02:08 +00:00
307bfbe677
[brcm63xx] Fix nxp_74hc164 driver compile error (builbot)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-24 16:10:41 +00:00
4701c8448b
[brcm63xx] fix platform_devices registration
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-18 19:49:54 +00:00
6591e5b4dd
[brcm63xx] add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 17:45:50 +00:00
f46ab7dcae
[brcm63xx] remove 2.6.32 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 16:32:35 +00:00
f320f07d40
[brcm63xx] fix SPI driver, move register out of driver code
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:30 +00:00
a52f0a386a
[brcm63xx] restore kernel oldconfig
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:24 +00:00
bfa00c8c0b
[brcm63xx] refresh patches
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:04 +00:00
5eb60cbbf7
[brcm63xx] refresh nb4 support. Register 74x164 device
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:57 +00:00
43a07c2197
[brcm63xx] add spi devices board info int bcm63xx_boards
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:51 +00:00
193172120b
[brcm63xx] add 74x164 SPI chip support
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:45 +00:00
7475affd50
[kernel] backport SPI master with no RXTX support (from 2.6.36)
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:39 +00:00
292e6071e4
[brcm63xx] register earlier extended platform devices
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:34 +00:00
dd2a52b3a0
[kernel] update 2.6.35.x to 2.6.35.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04 07:42:32 +00:00
2e243c343e
[brcm63xx] remove wpa-supplicant and iw from the Tecom GW6x00 profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-13 08:30:35 +00:00
36ab483f47
[brcm63xx] default to using 2.6.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:53 +00:00
97a561ae31
[brcm63xx] remove 2.6.33 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:47 +00:00
e79fccc1da
[brcm63xx] change the Tecom GW6x00 profile to use wl instead of b43
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:41 +00:00
61db512e5c
[brcm63xx] register udc and spi devices at the correct init level
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:35 +00:00
3506323f4a
[brcm63xx] refresh 2.6.35 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:29 +00:00
229d390a6c
[linux] enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-30 22:59:20 +00:00
79cda87dc5
[brcm63xx] add 2.6.35 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-25 19:56:08 +00:00
53fe275b46
[kernel] update to 2.6.32.20
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-22 17:07:37 +00:00
dfda352bca
[brcm63xx]: base-files: diag.sh: For power button as preinit status led, end with led left on, not off
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:33:08 +00:00
8b6a51edad
[brcm63xx] base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:32:59 +00:00
ba4b087197
[brcm63xx] patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:32:40 +00:00
514d70b175
[brcm63xx] reorder profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-26 18:58:35 +00:00
80edf72017
[brcm63xx] fix a typo in 040-bcm963xx_flashmap.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-25 00:10:37 +00:00
0b47979d12
update kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-19 11:34:03 +00:00
c8c989694d
[brcm63xx] fix alice gate2 internet:green led ( #6743 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-18 10:29:44 +00:00
1cff76c4b1
[brcm63xx] add required exports for wl.ko
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 17:03:56 +00:00
33990405fb
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12 14:06:13 +00:00
dc8d0d6700
[brcm63xx] add a wifi profile for proprietary wl
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01 01:39:04 +00:00
e5e370a876
[brcm63xx] add missing alice gate2 leds ( #6743 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-13 12:20:53 +00:00
924c09e04c
[brcm63xx] do not override cfg80211-related config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12 18:10:16 +00:00
93df402589
generic: move more common options to generic configuration
...
* CONFIG_ABX500_CORE
* CONFIG_ATOMIC64_SELFTEST
* CONFIG_BRIDGE_IGMP_SNOOPING
* CONFIG_CAIF
* CONFIG_CEPH_FS
* CONFIG_CRYSTALHD
* CONFIG_DEFAULT_SECURITY_SELINUX
* CONFIG_DEFAULT_SECURITY_SMACK
* CONFIG_DEFAULT_SECURITY_TOMOYO
* CONFIG_DT3155
* CONFIG_IP_MROUTE_MULTIPLE_TABLES
* CONFIG_L2TP
* CONFIG_LOGFS
* CONFIG_LPC_SCH
* CONFIG_MFD_JANZ_CMODIO
* CONFIG_MFD_RDC321X
* CONFIG_N_GSM
* CONFIG_RAMOOPS
* CONFIG_SERIAL_ALTERA_JTAGUART
* CONFIG_SERIAL_ALTERA_UART
* CONFIG_SERIAL_TIMBERDALE
* CONFIG_SM_FTL
* CONFIG_SQUASHFS_XATTRS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 10:45:51 +00:00
9ac326cb5e
generic: move some common symbols to generic configuration
...
* CONFIG_MUTEX_SPIN_ON_OWNER
* CONFIG_DEFAULT_HYDLA
* CONFIG_DEFAULT_VENO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 08:58:14 +00:00
26eef8e23a
generic: standardize CONFIG_INLINE_* symbols usage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 08:09:41 +00:00
9a6f5981fe
brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 02:04:56 +00:00
1f0332b969
brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:44:37 +00:00
03a1fd3779
brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:20 +00:00
d0f8de305f
brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:09 +00:00
f8e8dcf746
brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:58 +00:00
089ea4a93c
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:47 +00:00
de002a7d39
update linux kernel to 2.6.32.14
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-27 18:09:09 +00:00
6598259ef5
target/linux: refresh 2.6.32 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-24 20:35:46 +00:00
0710ef015d
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-23 13:16:51 +00:00
bc4ae75a7d
[brcm63xx] revert r21085, fixes #7282
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-04 08:07:39 +00:00
4a0dfb52df
[brcm63xx] do not write to per-port over-current register, which is bogus ( #6898 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-02 19:14:10 +00:00
ea459f4e40
[brcm63xx] rename reset_buttons to buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:54:24 +00:00
bcca3791ea
[brcm63xx] add WPS button support for nb4 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:51:41 +00:00
edea3f2ecf
[brcm63xx] fix gpio button key code, match button-hotplug code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:51:02 +00:00
7e2975d848
[brcm63xx] fix gpio_button device register
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:50:09 +00:00
b73d20640c
[brcm63xx] fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-28 12:30:32 +00:00
2c0aef5df7
[brcm63xx] extend bcm63xx_wdt driver for debugging purposes, thx Miguel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 15:45:03 +00:00
9c40666ff7
sync to kernel 2.6.32.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 14:30:08 +00:00
42c03f1014
[brcm63xx] add neufbox 4 board support, thx Miguel & Florian
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:49:31 +00:00
2d2a23e097
[brcm63xx] add NXP 74HC164 chip driver support, thx Miguel & Florian
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:48:26 +00:00
fc8e17eeed
[brcm63xx] add extended platform devices patch, thx Miguel & Florian
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:46:22 +00:00
6edaad0b91
[brcm63xx] fix spi chip select configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 13:33:48 +00:00
698761efeb
[brcm63xx] fix bcm6358 spi base register address ( #7234 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 09:22:27 +00:00
6ad5cee86b
[brcm63xx] the SPI_CMD register is 16-bits wide
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 09:22:23 +00:00
d96335b041
package/kernel: move PCMCIA modules to their own file & submenu
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 13:53:31 +00:00
ae9b96421b
package/kernel: move target specific modules to their own target files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 13:34:51 +00:00
3ac4c866a3
[brcm63xx] register spi controller, remove whitespaces
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:49 +00:00
593cba7b0a
[brcm63xx] resync 2.6.33 mtd patch with the one for 2.6.32
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:44 +00:00
fada783102
[brcm63xx] fix wrong refresh on flashmap patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:01 +00:00
2c1712ef73
[brcm63xx] re-instate SPI support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:51 +00:00
01085b1245
[brcm63xx] refresh 2.6.32 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:46 +00:00
15dd10237e
[brcm63xx] alwasy read imagetag with 64K erase block size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:42 +00:00
a0a67ed366
kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 07:12:09 +00:00
a471baeb22
tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-14 00:45:48 +00:00
9d42bb1a21
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12 23:15:56 +00:00
393df13165
[brcm63xx] do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 18:43:36 +00:00
9b32abb33e
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct
...
combining the elements so that it is no longer necessary to create an openwrt-only
tagid and tagcrc, and elimate the tagid detection and switch statements which
made dealing with imagetags overly complicated, especially since the logic would
need analogs in all code that touched the imagetag. Patch from cshore.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-01 21:20:43 +00:00
dc3662326e
[brcm63xx] move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 18:11:06 +00:00
8e67ddaccc
kernel: update to 2.6.32.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 10:45:25 +00:00
ec5ebe1160
[brcm63xx] drop support for 2.6.30 kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 10:12:48 +00:00
f98aab2b04
[brcm63xx] add support for D4PW board, patch from mexit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25 12:06:01 +00:00
26b6c87a9a
[brcm63xx] refresh 2.6.32 patches, fix livebox support ( #6821 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-14 16:21:28 +00:00
f71d2a3f8e
do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-11 09:50:11 +00:00
2abf2ff310
[brcm63xx] do not register devices in device_initcall level, this breaks the SSB SPROM registration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 21:49:37 +00:00
b49f5fd5b0
[brcm63xx] remove mail headers from patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 14:55:34 +00:00
5d3c2f9bf1
[brcm63xx] add support for 2.6.33
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 21:24:34 +00:00
cbe9203123
[brcm63xx] add support for 2.6.32, dropped the SPI patch for now
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 20:50:51 +00:00
4d33e84269
[brcm63xx] build images for RG100A (bcm6358-based boards) ( #6755 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:39 +00:00
ca64c45c76
[brcm63xx] fix gpio-leds registration for boards having less than 8 LEDs ( #6528 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-21 14:27:17 +00:00
f0e60800b4
[brcm63xx] fix the receiving of packets with a 1500 mtu and vlan enabled ( #6698 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 11:56:13 +00:00
66ee5acfff
clean up handling of some kernel symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-11 09:33:16 +00:00
0362ea3294
[brcm63xx] fix printing of mtd offsets, remove whitespaces.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 21:37:25 +00:00
a300ad427a
[brcm63xx] move files to files-2.6.30, to ease newer kernel integration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 21:00:50 +00:00
89c1c5f5f4
brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19361 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28 16:54:00 +00:00
9cc7c86126
replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-23 17:21:18 +00:00
c0c8556ba8
Fix typo in AGPF_S0 reset button definition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-16 03:13:56 +00:00
e17e2be08e
bcm63xx: add gpio leds to alice gate
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15 13:30:46 +00:00
2de49087ef
[kernel] update to 2.6.30, refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-04 14:52:45 +00:00
cceb3dffcf
kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-29 14:31:55 +00:00
29de13ad8f
[brcm63xx] add support for the RTA1025W_16 board ( #5979 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-22 14:53:20 +00:00
156fc688cb
some more Kconfig symbol move..
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:52:41 +00:00
9d5ce6e269
another round of kernel config cleanups
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:42:24 +00:00
ff8305e702
sort all target config files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 09:27:13 +00:00
fee653c749
[brcm63xx] merge upstream fixes on mdio loop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-07 12:48:17 +00:00
26738bea21
[brcm63xx] images without tagid now fallback to the untouched partition layout ( #6093 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03 19:59:04 +00:00
03b0af7593
[kernel] remove no longer used configs and patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 09:55:53 +00:00
297d0b6536
[brcm63xx] do not generate trx images, this is useless
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 13:39:29 +00:00
23398f1831
[brcm63xx] remove 2.6.28 support, we never really used it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 21:13:46 +00:00
1a39f664cb
[brcm63xx] switch to 2.6.30.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 21:10:53 +00:00
d5ce9d0af9
[kernel] update to 2.6.27.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-23 09:12:17 +00:00
81ae5e6bed
[kernel] brcm63xx: fix cardbus support with BCM6358 ( closes : #5918 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-05 20:40:05 +00:00
e44c2d2d14
[generic-2.6] move IMAGE_CMDLINE_HACK default to generic from targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-05 17:05:34 +00:00
69a107aa04
update to latest 2.6.27 and 2.6.30 kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-17 11:22:33 +00:00
f699b39f6f
[kernel] update to 2.6.27.33
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-11 07:45:08 +00:00
822c6f29e0
kernel: get rid of the simple_prom_emulator, it is not really useful
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-10 18:30:20 +00:00
a1d5e060e3
kernel: add generic image_cmdline hack to MIPS targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-10 18:30:01 +00:00
ab91958046
[kernel] update to 2.6.27.32
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-09 07:13:09 +00:00
ddce282a1f
[brcm63xx] prevent gpio-buttons registration failure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-08 15:24:06 +00:00
c157373236
[brcm63xx] fix typos against the gpio buttons driver ( #5804 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-07 18:17:45 +00:00
31de48c7d8
[brcm63xx] add infrastructure to register gpio-input reset button
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-06 13:54:17 +00:00
af3d584ce7
[brcm63xx] fix reboot hang on bcm6345, thanks AndyI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-02 08:32:00 +00:00
02e19f8d5e
[kernel] switch to 2.6.27.30
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-17 09:17:06 +00:00
2371d7016c
[brcm63xx] add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-12 08:41:47 +00:00
cbd3f96b0d
[brcm63xx] fix typo, INT_MASK is writable, INT_STATUS is not
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-11 18:57:04 +00:00
6ad8618e31
[brcm63xx] more bcm63xx definition fixes, thanks AndyI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-11 18:50:07 +00:00
1c49507d80
[brcm63xx] add support for the Pirelli AG226G board ( #5337 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:19:47 +00:00
d7ff5b45f6
[brcm63xx] remove useless hard reset in the SPI controller driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:18:30 +00:00
6ed6216d1c
[brcm63xx] fix assignment instead of comparison in the mtd driver ( #5649 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:08:07 +00:00
32a9f72ea2
[brcm63xx] merge upstream fixes for bcm63xx_enet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-08 11:25:36 +00:00
033116d210
[brcm63xx] bcm6345 fixes from AndyI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 20:33:42 +00:00
3c0efe2dec
[brcm63xx] fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 18:53:44 +00:00
1bfab34d40
[brcm63xx] disable watchdog for bcm6345 until it gets fixed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 18:44:20 +00:00
c4ef19ed00
[brcm63xx] fix printing of offsets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-02 13:50:39 +00:00
8bbea0d1bc
[brcm63xx] add experimental support for 2.6.30.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-01 16:56:36 +00:00
af59e48234
[brcm63xx] more bcm6345 fixes and definitions, thanks to AndyI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 20:15:43 +00:00
20cf07cefb
[kernel] refresh 2.6.27 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 11:10:20 +00:00
c5be44cf5e
[kernel] update to 2.6.27.29
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 11:09:27 +00:00
8426afed36
[brcm63xx] generate images for RTA1025W_16-based routers ( #5594 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 10:47:00 +00:00
35815395ca
[brcm63xx] add experimental support for 2.6.28.10, tested on bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-30 21:29:25 +00:00
0ba41d0ebc
[brcm63xx] enable 6345 support now that it boots up to user-space
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 23:04:58 +00:00
fd243ab4c9
[brcm63xx] fix typo for the flash start address on bcm6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 22:31:28 +00:00
dcd1e5acd9
[kernel] switch to 2.6.27.28
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 10:01:33 +00:00
d5ddfb1048
[brcm63xx] fix malformed patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-25 16:18:02 +00:00
ad41f0188a
[brcm63xx] bcm6345 does not seem to handle r4k_wait correctly, disable it ( #5474 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-24 20:25:31 +00:00
78b101cefc
[kernel] use 2.6.27.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-24 17:03:03 +00:00
349a74df53
[brcm63xx] fix typos introduced in 16942
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-21 12:22:01 +00:00
cf6b6ea15b
[brcm63xx] make the ethernet driver compile with newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-21 11:48:08 +00:00
668b85c3ed
[brcm63xx] request irq with the platform driver name instead of bus_id which is being removed in newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-20 10:52:08 +00:00
f085bee463
[brcm63xx] we are using the default-on trigger for power LEDs, no need to change their state from userspace
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 09:27:33 +00:00
c6ab7daf85
[brcm63xx] register GPIO-connected LEDs for known boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 00:40:23 +00:00
e68a9dd226
[brcm63xx] mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-17 15:58:06 +00:00
4907e1e896
[brcm63xx] fix comment only valid for bcm6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-17 15:57:09 +00:00
5017612ffd
[brcm63xx] resync kernel configuration and enable kexec
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-12 11:31:00 +00:00
f292ca7950
[brcm63xx] add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-06 11:28:34 +00:00
8592d505b5
[brcm63xx] add a profile with no Wi-Fi drivers enabled, useful for bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-06 11:21:22 +00:00
5c6d0f4dbd
[kernel] update to latest 2.6.27.26 stable kernel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-03 09:31:52 +00:00
4bbd24f57f
[brcm63xx] add the infrastructure to use a MPI/GPIO connected VoIP DSP
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-01 21:00:41 +00:00
7bba3b72d7
[brcm63xx] fixes for the bcm6338 clocks, thanks Maxime
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-01 13:49:20 +00:00
1850996a1b
[brcm63xx] a couple of more fixes to get 6345 booting up to the console handover
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-30 13:45:49 +00:00
73821328e6
[brcm63xx] shared DMA zone is twice smaller on 6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 20:06:44 +00:00
9f14950a67
[brcm63xx] turn on size optimization for bcm63xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 20:06:13 +00:00
61bd4183a5
[brcm63xx] off-by-one gpio numbers for bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 04:23:11 +00:00
93039fd66e
[brcm63xx] bcm6338 can support PCI since it has MPI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 21:43:55 +00:00
c6eb086771
[brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 20:32:43 +00:00
d0c0b1b484
[brcm63xx] fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:58:00 +00:00
53035bf4e2
[brcm63xx] fix a stupid typo preventing the board from being detected
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:30:45 +00:00
d1867359ac
[brcm63xx] prevent bcm6338 and bcm6345 from crashing very early
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:23:58 +00:00
79422ea720
[brcm63xx] only register fallback sprom and enable PCI if we actually have support for PCI
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 16:17:18 +00:00
ed819b628a
[brcm63xx] do not bloat the kernel with experimental bcm6345 for now
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 15:52:03 +00:00
b89b571a5a
[brcm63xx] more missing register definitions for bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 15:51:27 +00:00
e430ad8740
[brcm63xx] more bcm6338 and bcm6345 related fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 12:34:35 +00:00
5857eee187
[brcm63xx] define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 11:08:12 +00:00
076ac8ee88
[brcm63xx] generate images for the bcm6338w
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 10:27:37 +00:00
9fb3d8efcb
[brcm63xx] add board definitions for the bcm6338w
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 10:27:13 +00:00
e951c62e47
[brcm63xx] add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson ( #5364 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-18 15:00:32 +00:00
3135ca9da0
[brcm63xx] generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17 13:16:59 +00:00
f5818c9e93
[kernel] use 2.6.27.5
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17 08:46:47 +00:00
ee96d3dee8
use the same i/o schedulers for all targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-15 20:43:02 +00:00
2af8093895
[brcm63xx] use build system REVISION variable ( #5317 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 13:43:48 +00:00
2670ed1229
The attached patch adds building of firmware
...
images for more routers based on the brcm63xx chipset.
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 08:24:13 +00:00
9e9714f004
[brcm63xx] cleanup the watchdog driver a bit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 21:35:51 +00:00
1726b10d08
[brcm63xx] fix the watchdog driver and enable it by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 21:28:15 +00:00
3339e02ed8
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known
...
imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987 ).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 08:04:52 +00:00
f012e61a4f
[brcm63xx] remove this line which got accidentaly succesfully applied, but should not have ( #5285 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-08 13:42:11 +00:00
da93c74c84
[brcm63xx] fix ethernet driver removal
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:04:53 +00:00
dbbeab5dbd
[brcm63xx] fix pcmcia device removal
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:04:11 +00:00
93ac56d798
[brcm63xx] add missing null entry in pcmcia driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:03:41 +00:00
e41524a298
[brcm63xx] request gpio pins and set direction correctly for pcmcia
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:03:03 +00:00
6f2968d917
[brcm63xx] be SMP safe even with gpiolib
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:02:23 +00:00
5d27e16f2e
[brcm63xx] cache gpio values in gpio_set
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:01:55 +00:00
b904d67782
[brcm63xx] use the correct number of GPIOs for bcm6358
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:01:03 +00:00
b86d85140f
[brcm63xx] register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 09:59:28 +00:00
11d0b7ea0a
[brcm63xx] merger mtu/802.1q related fixes:
...
bcm63xx integrated ethernet mac supports receiving and sending frames
bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-03 08:55:18 +00:00
693f304923
[brcm63xx] backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-01 18:27:51 +00:00
bc947f05ed
[brcm63xx] include wpa-supplicant iw in the default profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-29 15:33:14 +00:00
ca28a81e80
[brcm63xx] also include the SPI driver in the gw6x00 profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-26 11:15:27 +00:00
852a43eef9
[brcm63xx] include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-26 10:25:55 +00:00
90a0ecd275
[brcm63xx] add the Tecom GW6x00 (6000 and 6200) board profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-25 16:14:13 +00:00
13242dd7c2
[kernel] update to new stable 2.6.27.24
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-20 09:00:09 +00:00
78aacb8183
[kernel] disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-19 18:15:19 +00:00
69d2976c5d
even more config file cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-18 13:21:25 +00:00
5e4b863164
[brcm63xx] add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-18 11:11:23 +00:00
d30d9400c0
[brcm63xx] add support for sysupgrade ( #5117 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-17 16:53:57 +00:00
c8c98cdd14
config cleanups
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 10:40:04 +00:00
4977bd6134
cardbus != pcmcia -- disable it in b43
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 08:58:02 +00:00
7136fa07ee
[brcm63xx] add missing configuration symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 07:04:32 +00:00
cbd1b567a8
some additional config file cleanup..
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 13:32:34 +00:00
db8d9304dc
unify congestion control options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 12:42:07 +00:00
476b993379
make kernels use /etc/preinit by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 10:20:53 +00:00
3da36e0eb2
[brcm63xx] also supports pcmcia
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-07 15:25:15 +00:00
402c71c452
some more kernel config cleanup.. last for today :)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 20:57:02 +00:00
68cfaed479
more cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 20:31:47 +00:00
6172bcc2e3
cleanup MTD option handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 19:13:43 +00:00
16600ec90d
move MFD stuff to the generic kernel configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 13:51:29 +00:00
13f29a0f22
refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 11:35:08 +00:00
3f40c20af9
upgrade to newest stable kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-03 16:58:06 +00:00
76377332a4
[brcm63xx] now that we register gpiodev, also include gpioctl in the default image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 14:09:45 +00:00
ca100df2da
[brmc63xx] register gpiodev
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 14:09:01 +00:00
b1b869ec99
[brcm63xx] fix redundant driver name printing in probe function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:32:54 +00:00
fb6c465ea7
[brcm63xx] make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson ( #4909 , #4943 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:18:48 +00:00
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
44b90dc6a2
[kernel] do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module ( #4659 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-12 12:54:38 +00:00
c1c91b95fc
[brcm63xx] some more fixes to the SPI controller driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-08 08:52:57 +00:00
7206f21b0a
[brcm63x] imagetag's -k argument is expected to be hexadecimal instead of decimal ( #4885 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-07 13:22:32 +00:00
20c283eff0
[brcm63xx] override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:22:07 +00:00
2094a9de3e
[kernel] refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:09:20 +00:00
a4260b52e9
[kernel] update to kernel version 2.6.27.21
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:05:51 +00:00
a35170087e
[brcm63xx] enable all blocks on 6338 and uart clock on 6345
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-21 10:50:44 +00:00
718972f840
[brcm63xx] add support for bcm6345 SoC, needs testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-20 15:08:02 +00:00
1675d3bed9
[brcm63xx] fix SPI register switch and prepare for UDC, thanks to Henk Vergonet ( #4783 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 11:28:54 +00:00
1a7f8acef6
[brcm63xx] add the CFE offset command line option to the imagetag utility, closes ( #4366 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-16 12:29:11 +00:00
4750ec9396
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 08:54:04 +00:00
4b5f21833c
[brcm63xx] do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-11 10:32:44 +00:00
6ee24eaca7
[brcm63xx] make SPI work in full-duplex mode by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-10 15:28:29 +00:00
83c9f9cae5
[brcm63xx] include kmod-switch in the default images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09 21:58:49 +00:00
ec86a16556
[brcm63xx] package the bcm63xx-spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 19:21:55 +00:00
cfd563d0c0
[brcm63xx] add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 15:27:46 +00:00
59da47705d
[brcm63xx] fix SPI accessors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 14:20:15 +00:00
4d87772497
[brcm63xx] fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:43:13 +00:00
2c319b5f1f
[brcm63xx] compile and register SPI controller device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:18:26 +00:00
9fb383ef35
[brcm63xx] make bcm6358 consistend with the other boards naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:17:19 +00:00
fc26c7a305
[brcm63xx] fix some SPI register definitions and platform-device registration code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:13:52 +00:00
8aa93e0c26
[brcm63xx] prepare for SPI controller driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:15:00 +00:00
fa5dbdf2dc
[brcm63xx] fix SPI register definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:13:10 +00:00
a7d3754b11
[brcm63xx] fix a bcm963xx-flash warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-02 18:55:47 +00:00
757c9f0080
[brcm63xx] provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:48:23 +00:00
9d8922c2f6
[brcm63xx] move the device registration to an earlier initcall level, required for fallback SPROM to work
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:18:34 +00:00
dbefaf4f75
disable all kernel config options that are set to =m
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 04:44:24 +00:00
8acc4624ee
[kernel] update to 2.6.28.7 and 2.6.27.19
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-21 18:53:05 +00:00
d0c16b318e
[kernel] update to 2.6.27.17
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-15 07:47:12 +00:00
Felix Fietkau
Daniel Dickinson
Hauke Mehrtens
Florian Fainelli
Imre Kaloz
Claudio Mignanti
Lars-Peter Clausen
Jo-Philipp Wich
Gabor Juhos
Nicolas Thill
Raphaël HUCK
Alexandros C. Couloumbis
Andy Boyett