Gabor Juhos
208fa63215
ar71xx: create profile and build image for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:20 +00:00
Felix Fietkau
dacb6839c0
ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:22:04 +00:00
Felix Fietkau
95a748c5b8
ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 19:37:49 +00:00
Felix Fietkau
bd86f88b0a
ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:01 +00:00
Gabor Juhos
4243897bf7
ar71xx: fix TL-WR1041 image size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
Gabor Juhos
d9f7205aa4
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
Gabor Juhos
5b7d0a95c8
ar71xx: add profile and build image for the TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05 17:02:41 +00:00
Gabor Juhos
571d6c4766
ar71xx: image: build initramfs images for the WHR boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-06 06:45:08 +00:00
Gabor Juhos
2082a166ec
ar71xx: image: build initramfs images for more boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:13 +00:00
Gabor Juhos
4251611f6f
ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:11 +00:00
Gabor Juhos
2f5d4465f9
ar71xx: image: pass mtdlayout variables by value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:10 +00:00
Gabor Juhos
a25b939eac
ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:08 +00:00
Gabor Juhos
bc6cbb5644
ar71xx: remove the built-in MTD map of the AP96 board
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:07 +00:00
Gabor Juhos
35c72f864e
ar71xx: remove the built-in MTD map of the PB92 board
...
Pass the mtd_layout via the kernel command line instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:05 +00:00
Gabor Juhos
1f4578115c
ar71xx: remove the built-in MTD map of the Zcomax devices
...
Pass the mtd_layout via the kernel command line instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:04 +00:00
Gabor Juhos
8aca9f5db2
ar71xx: reclaim the 'user_property' partition on WHR-* boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:02 +00:00
Gabor Juhos
902c08b7e6
ar71xx: add profile and generate image for the JA76PF2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-16 18:00:40 +00:00
Gabor Juhos
3cd6cb21cd
ar71xx: stop image building if a loader is missing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11 14:03:28 +00:00
Gabor Juhos
04b9bc61e1
ar71xx: use v6.0.0 in UBTN-XM firmwares ( closes #11038 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-24 20:41:38 +00:00
Gabor Juhos
390cbbcf32
ar71xx: fix image signature for UBNT-XM boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 14:45:52 +00:00
Daniel Dickinson
37d73823be
[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:38:33 +00:00
Daniel Dickinson
3be148b333
[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:29:26 +00:00
Daniel Dickinson
190f75f104
[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:24:45 +00:00
Gabor Juhos
1c8bb38b68
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:58 +00:00
Gabor Juhos
c09040c80d
ar71xx: add profile and build image for the TEW-673GRU board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-08 16:26:27 +00:00
Gabor Juhos
780aecc9ca
ar71xx: support for D-LINK DIR-615 rev. E4
...
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.
It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.
[juhosg: add 3.2 support]
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:09 +00:00
Gabor Juhos
0e45b3367c
ar71xx: add support for TP-Link TL-MR11U
...
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.
Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade
[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]
Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:37:01 +00:00
Gabor Juhos
f25655b13b
ar71xx: compress kernel binaries in Image/Prepare stage
...
The lzma compressed kernel is used by one of the loaders.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31 18:36:54 +00:00
Florian Fainelli
c003d83f1a
[ar71xx] add support for the Atheros AP113 reference board
...
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 13:19:49 +00:00
Gabor Juhos
c82034b4c9
ar71xx: use 64k block size for WZR-HP-AG300H
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-27 10:42:41 +00:00
Gabor Juhos
1727dca60a
ar71xx: fix sysupgrade image building of atheros boards after r29899
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-27 07:51:09 +00:00
Gabor Juhos
9ae562846f
ar71xx: create the temporary directory before building initramfs images
...
Thanks to Florian for reporting.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 21:28:34 +00:00
Gabor Juhos
d8bb980f47
ar71xx: create a profile and build images for Compex WPE72
...
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:44 +00:00
Gabor Juhos
cb51e6c0d7
ar71xx: use the lzma loader on the Planex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:10 +00:00
Gabor Juhos
1c279ca34e
ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:08 +00:00
Gabor Juhos
bd7d55d8ed
ar71xx: pass mtdlayout to Planex boards via command line
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:33 +00:00
Gabor Juhos
6536036506
ar71xx: nuke fs_all variable in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:25 +00:00
Gabor Juhos
0ee87255f5
ar71xx: create interim kernel files in a separate dir
...
This reduces the size of the ImageBuilder tarball a lot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:23 +00:00
Gabor Juhos
cb618e5c95
ar71xx: prebuild all loaders in Image/Prepare stage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:22 +00:00
Gabor Juhos
31ac2df946
ar71xx: build ALFA AP96 images with default profile as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:33:15 +00:00
Gabor Juhos
c72cb530b3
ar71xx: change board id of the UniFi board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:50 +00:00
Gabor Juhos
f9d78517ad
ar71xx: add a profile and build images for the TL-WR2543N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:42 +00:00
Gabor Juhos
a128548072
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
Gabor Juhos
df72f38897
ar71xx: create profile and build image for the ALFA AP96 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:57 +00:00
Gabor Juhos
5c8819fc34
ar71xx: specify console kernel parameter for the Compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:59 +00:00
Gabor Juhos
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
Gabor Juhos
e1cde7e2f2
ar71xx: add profile and build image for the TL-WA701N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:54 +00:00
Gabor Juhos
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
Gabor Juhos
70c438bb93
ar71xx: add profile and build factory image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:29 +00:00
Gabor Juhos
c3f617ef35
ar71xx: build images for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:28 +00:00