Commit Graph

19050 Commits (140a67149ab8bad8939f5b1dddf69b9791b0e4de)

Author SHA1 Message Date
Jo-Philipp Wich 0ab7f53ebf [ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30 02:04:57 +00:00
Jo-Philipp Wich 1e03d225f0 [kernel] backport two changes from kernel.org:
65e9b62d4503849b10bedfc29bff0473760cc597
ipv6: add special mode accept_ra=2 to accept RA while configured as router

c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8
ipv6: add special mode forwarding=2 to send RS while configured as router


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30 01:52:51 +00:00
Jo-Philipp Wich 1c91659cec [package] base-files: disable ipv6 on bridge ports, this prevents stray RA assigned and link local addresses on bridge member devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30 00:46:21 +00:00
Daniel Dickinson 9b5364abf2 [brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:13:00 +00:00
Daniel Dickinson 0c4e2c5526 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:44 +00:00
Daniel Dickinson 68981f5d8e bcm63xx: Add board id override fixup.
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:40 +00:00
Daniel Dickinson e96cc39f19 bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:36 +00:00
Daniel Dickinson e21b57d529 bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:30 +00:00
Daniel Dickinson 94a1adaf05 bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:26 +00:00
Daniel Dickinson f78d9eebba bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:19 +00:00
Felix Fietkau d2fb3cf3f7 ath9k: fix software retry counter tracking - should fix 802.11n stability issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24183 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:28:19 +00:00
Felix Fietkau 9419300d8a mac80211: merge the new version of the throughput led trigger patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:28:12 +00:00
Florian Fainelli 5ac80d9e71 [ar7] refresh patches and remove trailing whitespaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:14:34 +00:00
Florian Fainelli b12f4b416e [ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:03:56 +00:00
Florian Fainelli 6545f6b800 [ar7] refresh 973-cpmac_handle_mvswitch.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:03:48 +00:00
Florian Fainelli 2fe72098a1 [ar7] refresh and refine vlynq patch, patch from sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 18:03:42 +00:00
Hauke Mehrtens bdbecf3d94 brcm47xx: remove support for old kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 14:08:04 +00:00
Hauke Mehrtens 45eb335e69 brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 14:05:31 +00:00
Hauke Mehrtens 56c62549fd kernel: add missing config symbols for 2.6.37-rc3
Thank you maddes for reporting. (closes #8323)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 11:14:25 +00:00
Felix Fietkau de52043720 ath9k: fix module reload on ar713x based systems with ar92xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 22:51:03 +00:00
Hauke Mehrtens dda4cd04a8 brcm47xx: reorder patches like they were commitet upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 22:47:11 +00:00
Felix Fietkau 12bf8a15b8 remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 22:40:26 +00:00
Felix Fietkau a93481dbe9 kernel: remove the bogus ext2/ext3 dependency on linux 2.6.30/31 - some people still want to use those modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 22:33:08 +00:00
Felix Fietkau 4a12b0531a mac80211: add pending patches for throughput based led blinking and replace the broken ath9k blinking code with it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 22:11:13 +00:00
Hauke Mehrtens 6816f4207d kernel: add missing config option
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27 16:08:41 +00:00
Alexandros C. Couloumbis 7a94d57241 package/ncurses: fix freebsd install issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-26 17:51:14 +00:00
Alexandros C. Couloumbis d5634c554b tools/pkg-config: update to version 0.25
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 18:56:19 +00:00
Jo-Philipp Wich 1b985d993d [package] opkg: ship pkg.m4, this fixes building on FreeBSD
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 18:02:36 +00:00
Hauke Mehrtens 7148a451d8 mac80211: cfg80211 should not depend on rfkill.
If rfkill is build as an module CONFIG_RFKILL_MODULE is set and cfg80211 will also depend on that.
Now all modules build from compat-wireless will not use rfkill.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 14:45:18 +00:00
Florian Fainelli 4f39e2f98f [ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 12:18:41 +00:00
Florian Fainelli c4d03cfab4 [ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 12:18:36 +00:00
Florian Fainelli 4f1f8daf3d [ar7] handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and Wipster
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 11:58:02 +00:00
Florian Fainelli 59f852dc1a [ar7] handle new revisions of vlynq wrt reset sequence, patch from sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 11:57:57 +00:00
Florian Fainelli c2162a4e4d [ar7] increase flash window size to 32MiB, patch from sn9.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 11:57:52 +00:00
Florian Fainelli c6104d4859 [ar7] update acx-mac80211 to 20101030 snapshot, patch from sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25 11:57:48 +00:00
Imre Kaloz 1ae1fb6b50 update to the latest stable kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 18:50:11 +00:00
Jo-Philipp Wich 553b131fe8 [package] mtd: whitespace cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 16:21:25 +00:00
Jo-Philipp Wich e293c3e32d [package] mtd: fix r24132
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24134 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 16:18:34 +00:00
Jo-Philipp Wich 8c43fbff92 [package] opkg: write error messages to stdout
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 14:54:26 +00:00
Alexandros C. Couloumbis 7989ca19b5 package/mtd: (enhancement) add option to prevent erase when writing to flash. (closes #8308)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 14:10:01 +00:00
Felix Fietkau 438fd77049 change the recursive dependency template to use more make evaluation - the shell command got so long that it triggered "Argument list too long" on some systems (#8231)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 14:07:12 +00:00
Alexandros C. Couloumbis 62c721aac1 tools/e2fsprogs: fix freebsd compile issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 14:00:36 +00:00
Alexandros C. Couloumbis 0dd88d0a3b tools/mtd-utils: update to mtd-utils-20101124
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 12:05:06 +00:00
Alexandros C. Couloumbis 28ab38511e tools/e2fsprogs: update to e2fsprogs-1.41.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 11:59:51 +00:00
Daniel Dickinson ed589945f0 [brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 11:06:13 +00:00
Gabor Juhos 231f17d61e ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:23 +00:00
Gabor Juhos 8120006c05 generic: add rtl8366rb switch vlan fid support
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:21 +00:00
Gabor Juhos 404b68fcd2 ramips: Use NET_IP_ALIGN instead of hardcoding 2
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:18 +00:00
Gabor Juhos 00bd3f47c4 ramips: DMA map the correct RX skb size
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:16 +00:00
Gabor Juhos 77a769e423 ramips: Don't trigger BUG_ON due to skb allocation failure
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:12 +00:00