ede9030b02
ar71xx: add support for Compex WPE72/WPE72NX
...
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.
[juhosg: add support to 3.2 as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:41 +00:00
c82d70b34a
generic: add WPE72 ID to myloader.h
...
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 17:01:38 +00:00
ab13e563a8
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
...
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26 10:44:23 +00:00
e55bf8c335
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
...
This patch fixes the board detection of the TL-MR3020.
The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.
The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.
[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 07:44:45 +00:00
47e45167d9
ar71xx: TL-MR3020: fix GPIO polarity for button and switch
...
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-25 07:44:43 +00:00
cb51e6c0d7
ar71xx: use the lzma loader on the Planex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:10 +00:00
1c279ca34e
ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 20:12:08 +00:00
2ca85663ea
ar71xx: fix the AP/Router LED definitons on MZK-W300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:38 +00:00
0353e85c26
ar71xx: preset WLAN LED config on MZK-W300NH
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:36 +00:00
98cfb744db
ar71xx: remove hardcoded MTD layout from planex files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:34 +00:00
bd7d55d8ed
ar71xx: pass mtdlayout to Planex boards via command line
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:33 +00:00
352efddfa0
ar71xx: remove an unused header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 18:40:31 +00:00
bb3ee75edf
ramips: generate sysupgrade image for the ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:48 +00:00
34ce00adfd
ramips: add user-space support for ALL0256N
...
This adds uci-defaults and sysupgrade support for the ALL0256N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:47 +00:00
523eae8c33
ramips: add kernel support for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 11:48:45 +00:00
6536036506
ar71xx: nuke fs_all variable in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:25 +00:00
0ee87255f5
ar71xx: create interim kernel files in a separate dir
...
This reduces the size of the ImageBuilder tarball a lot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:23 +00:00
cb618e5c95
ar71xx: prebuild all loaders in Image/Prepare stage
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:22 +00:00
484156db8c
ImageBuilder: respect the PROFILE parameter
...
Based on a patch from #10766
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-24 09:47:20 +00:00
1bf0a3ebdf
ramips: scripts updates
...
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 10:23:32 +00:00
019a86ebc3
ar71xx: 3.2: fix build errors if PCI is not enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 08:52:21 +00:00
0dc4edde27
ar71xx: fix compiler warning if PCI is not enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-23 08:52:18 +00:00
fa34189a17
ar71xx: add initial support for 3.2
...
Tested on the following boards:
ALFA AP96
TL-MR3220 v1
TL-WR1043ND v1
TL-WR2543ND v1
TL-WR703N v1
TL-WR741ND v1
TL-WR741ND v4
WNDR3700 v1
WZR-HP-G300NH
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:38:19 +00:00
2899e54bd7
ar71xx: move arch specific files to files-2.6.39
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:38:11 +00:00
31ac2df946
ar71xx: build ALFA AP96 images with default profile as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 22:33:15 +00:00
835626f8de
generic: 3.2: allow to build myloader mtd parser for ATH79
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:43:39 +00:00
16b4bf4bc9
generic: allow to build myloader mtd parser for 3.2+
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:36:49 +00:00
f5db29305f
ramips fix f5d8235-v1 diag LED support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 18:11:39 +00:00
5a804a0710
ar71xx: wrt160nl_part: include module.h and fix compiler warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:38 +00:00
77681dfda2
ar71xx: tplinkpart: include module.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 17:55:36 +00:00
69c5ec5805
ar71xx: rename vsc7385 spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:57 +00:00
57182d0623
ar71xx: rename ap81 spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:56 +00:00
9c5fd0809f
ar71xx: rename rb4xx spi drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:54 +00:00
99e5d01717
ar71xx: rename the nxp_74hc153 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:52 +00:00
c72cb530b3
ar71xx: change board id of the UniFi board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:50 +00:00
0ddf352708
ar71xx: include linux/module.h in the micrel phy driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:51:49 +00:00
ba2cb89c06
ramips: add sysled and sysupgrade to wr512-3gn
...
Patch from #10035 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 13:43:23 +00:00
0727d4bcb6
generic: 3.2: don't disable lockdep for OOT modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 09:57:39 +00:00
31a1cdad82
generic: rtl8366: add rtl8366_smi_write_reg_noack helper
...
After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21 22:44:09 +00:00
69ece6cfdc
brcm47xx: add support for pcie host controller on bcma based SoCs.
...
This also adds minimal support for the BCMA43224 pcie wireless card.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21 22:39:20 +00:00
5bb3996560
ramips: sysupgrade for ESR-9753
...
This patch add sysupgrade for Engenius ESR-9753
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20 10:49:26 +00:00
9435ae8d19
kernel: fix OCF for linux 3.2
...
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 19:51:54 +00:00
a2378e6918
[adm5120] add missing kernel symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 01:57:22 +00:00
d3cae4c425
Make the grub timeout configurable on x86 targets
...
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 01:14:45 +00:00
7b83cebba9
x86/config-3.2: add linux-3.2 symbols for x86
...
The following symbols are missing for x86, in sorted order.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 00:31:39 +00:00
14af639832
[kernel] fix thinko in 102-ehci_hcd_ignore_oc patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-18 07:56:02 +00:00
286f36a31d
[lantiq] gigaset 76x
...
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17 12:10:35 +00:00
b58ab60fff
ramips: Rework ramips_eth to not require irqsave locking anymore
...
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.
This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17 11:23:11 +00:00
50050af93c
brcm47xx: add support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15 21:18:34 +00:00
f1429085fb
brcm47xx: run kernel_oldconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15 14:53:32 +00:00
8f76568da9
[target/omap4]: add support for OMAP4 based boards, starting with the PandaBoard
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 23:02:56 +00:00
c4bc1f1ae3
[generic/3.2]: fixup arm xz support with recent changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 22:55:04 +00:00
a3072557cb
[generic/3.2]: add missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 22:53:28 +00:00
2b5ef1fd59
kernel: disable bridge igmp snooping in 3.2 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29747 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 14:57:03 +00:00
08351a2063
kernel: disable bridge igmp snooping by default to avoid multicast issues
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 13:50:25 +00:00
743fd0610a
kernel: ppc40x: ppc44x: add missing kernel config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29742 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-14 12:04:17 +00:00
818a4e7d60
brcm47xx: update usb driver
...
Add workarround for BCM5357 and BCM4749.
This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
kmalloc'ed is never freed anywhere while platform_device_add_resources
will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
CONFIG_PM is selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 20:11:23 +00:00
2a947c251e
[generic] rtl8366: fix rtl8366_smi_detect() after r29677
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 19:17:58 +00:00
4aabd3dd85
brcm63xx: add support for linux 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:59:50 +00:00
b49e97601b
kernel: add support for linux 3.2.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:55:07 +00:00
84370fc2d3
kernel: backport overlayfs v11 to 3.0 and 2.6.39
...
Should fix whiteout issues and missing files when using extroot.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:42:53 +00:00
348b4546eb
kernel: update linux 3.1 to 3.1.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:38:28 +00:00
b2e991c3b2
kernel: update linux 3.0 to 3.0.17
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13 14:10:44 +00:00
15d2a21702
ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured
...
this makes enable_vlan=0 practical for vlan passthrough
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12 10:15:11 +00:00
a556557bc7
ar8216: do not strip vlan tags when running with vlan_enable=0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-12 10:15:08 +00:00
cb544f1fd3
ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 18:00:50 +00:00
84cac8c91b
[brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 13:47:48 +00:00
510237b282
ar71xx: disable ath79 in order to get rid of Kconfig warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:19 +00:00
c7cf50257f
ar71xx: pb44_spi: add shutdown handler
...
This allows to access the flash from a kexec'd kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:18 +00:00
d4f8c16d01
ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:17 +00:00
a1de404466
ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:15 +00:00
aeeb859e58
ar71xx: ar71xx_spi: add shutdown handler
...
This allows to access the flash from a kexec'd kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:14 +00:00
ad96a5a37b
ar71xx: ar71xx_spi: save and restore regs from probe/remove
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:13 +00:00
55412d0e9e
ar71xx: ar71xx_wdt: add shutdown handler
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-11 09:14:11 +00:00
06a14f561a
ar71xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:43 +00:00
f9d78517ad
ar71xx: add a profile and build images for the TL-WR2543N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:42 +00:00
8782a469c8
ar71xx: add initial support for the TL-WR2543N/ND board
...
The WLAN LEDs are not working yet.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:35 +00:00
ce48dfe9f2
ar71xx: allow to specify max read size for m25p80
...
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.
Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:33 +00:00
dcb14852cf
generic: add driver for the RTL8367R/M switches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:31 +00:00
7005c737ab
generic: rtl8366: preparing for RTL8367 support
...
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:30 +00:00
8ac68711cc
generic: rtl8366_smi: add timeout message
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 19:36:25 +00:00
c64226d2ad
ar71xx: local mac support on the wndr3700
...
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.
This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.
Patch-by: Dave Taht <dave.taht@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 17:24:44 +00:00
1f6caadd70
generic: improve MIPS kexec support
...
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/
Now the kernel can use the command line parameter from kexec-tools.
Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07 16:29:16 +00:00
363361428e
ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 15:54:59 +00:00
a128548072
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:59 +00:00
4052a864ee
ar71xx: fix RB-750 network configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-06 07:20:54 +00:00
881581493f
ar71xx: fix sections mismatch warnings in the nand drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:33 +00:00
9bcaf204ee
ar71xx: fix LED configuration on the RB-750
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-05 18:08:28 +00:00
df72f38897
ar71xx: create profile and build image for the ALFA AP96 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:57 +00:00
2d696ce97e
ar71xx: add inital support for the ALFA Network AP96 board
...
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 21:13:54 +00:00
5c8819fc34
ar71xx: specify console kernel parameter for the Compex boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:59 +00:00
3eeb7b7a5b
ar71xx: allow to use the command line hack on compex devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:58 +00:00
97682e0944
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:57 +00:00
a53822baf4
ar71xx: show correct model name on TL-WA701N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:55 +00:00
e1cde7e2f2
ar71xx: add profile and build image for the TL-WA701N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:54 +00:00
d18016e1c8
ar71xx: fix network configuration for the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:52 +00:00
bf40a234de
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:50 +00:00
0baf809de3
ar71xx: add default LED configuration for the TL-MR3020
...
Also use the system LED for diagnostic.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:49 +00:00
2526c08008
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
4be5cd66f3
ar71xx: use the new om-watchdog package for OM2P
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:41 +00:00
43711bfa75
[netfilter] remove current RTSP support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 00:29:29 +00:00
bfb3d1c93e
[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels ( #9802 )
...
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-03 23:08:15 +00:00
70c438bb93
ar71xx: add profile and build factory image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:29 +00:00
c3f617ef35
ar71xx: build images for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:28 +00:00
674aa34176
ar71xx: add support for the ALFA Network N2/N5 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-01 19:30:25 +00:00
859e59397b
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:46 +00:00
118232a591
ar71xx: enable SWCONFIG_LEDS
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:40 +00:00
fa9d5491b5
kernel: swconfig: introduce a generic switch LED trigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:30 +00:00
9bf3904856
ar71xx: ag71xx: implement get_port_{link,stats} callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:26 +00:00
ce5c3edbfe
kernel: swconfig: add get_port_{link,stats} callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:24 +00:00
be7cbae844
ar71xx: fix LEDs on the WRT400N
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 13:54:11 +00:00
8c1f52f521
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:43 +00:00
6d8bc6597d
ramips: rt288x: change base address and window size of flash bank 0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:36 +00:00
51a587a8b0
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-28 08:43:32 +00:00
8a4dd9c10f
ar71xx: enable sysupgrade support for airrouter
...
Works for me! ;-)
Patch-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:59:43 +00:00
22e9d33e1c
ar71xx: fix sysupgrade on PB42/PB44 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:57:01 +00:00
eef3b4c418
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-27 16:56:30 +00:00
30126e9579
[generic] add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-25 13:33:18 +00:00
6916e5eec4
brcm47xx: fix usb on more recent bcma based devices.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 17:21:52 +00:00
c9bc227e9d
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:16 +00:00
20b3755c63
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:10 +00:00
f3f765817f
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-23 14:27:05 +00:00
5f97cea3f0
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 05:43:53 +00:00
a5fdbc09b3
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
26415b5f86
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id ( #10649 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 01:27:48 +00:00
1d37e5d523
brcm47xx: remove patch starting adding brcm4716 to ssb
...
brcm4716 is supported by bcma now we do not need this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:55:20 +00:00
0803c1b511
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
...
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:39:13 +00:00
a8b46480d3
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:33:03 +00:00
a4209940db
brcm47xx: remove support for kernel 2.6.39
...
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:26:15 +00:00
7e96983fe1
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 09:04:15 +00:00
b809bbc100
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
3894ae522a
ar71xx: use 64kraw template on more TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 18:49:55 +00:00
e5d5ffcbc2
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
10a219ed66
ar71xx: add defines for the AR934X GMAC interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:36 +00:00
2b1b2e492f
ar71xx: fix GMAC1 interface speed on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:35 +00:00
56a02cffed
ar71xx: ag71xx: fix switch port setup for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:32 +00:00
5039a01b61
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:30 +00:00
59e650a276
ar71xx: ag71xx: setup switch interface mode on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:29 +00:00
3f45ffd8f2
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:28 +00:00
01036f2eae
ar71xx: allow to attach the internal switch for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:22 +00:00
691b20bcaf
ar71xx: introduce ar71xx_switch_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:11 +00:00
1c234742d6
ar71xx: build images for TL-WR741N/ND v2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:48 +00:00
ac0030116e
ar71x: use raw squashfs images for TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:46 +00:00
178dfb1db9
ar71xx: create a template for using unpadded squashfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:45 +00:00
3b391aa04c
ar71xx: put squash image right after the kernel on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:44 +00:00
c0f856759b
ar71xx: tplinkpart: allow to detect JFFS2 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:40 +00:00
bc40f1dc75
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:23 +00:00
b480583892
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:21 +00:00
58bcc09552
ar71xx: ag71xx: nuke ar7240sw_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:20 +00:00
c1ff55ab84
ar71xx: fix mac addresses on jjPlus devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:18 +00:00
97ebf387ba
ar71xx: build image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:11 +00:00
1b89ef9b2c
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
9d5225b963
ar71xx: add GPIO function bit defines for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:07 +00:00
8a07cba2b5
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:51:26 +00:00
df79552a2b
ar71xx: fix gpio count for ar7241/ar7242
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:47:24 +00:00
f3906a190c
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:42 +00:00
af0dd984dc
ath9k: add support for registering extra leds connected to the wmac gpio lines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:36 +00:00
74dbf6c823
ar71xx: get rid of squashfs-4k images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 20:41:24 +00:00
a4e54ee1c8
generic: disable 'small sector' erase in m25p80 driver
...
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 20:41:22 +00:00
af9ac63fda
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:14:59 +00:00
f5ed3d653f
ar71xx: fix wireless led on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:00:43 +00:00
2329eaffac
ar71xx: enable AR9341 support at setup.c
...
Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:43 +00:00
041a6265f8
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:40 +00:00
9db5641019
ar71xx: add gpios and usb for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 13:33:44 +00:00
c9fcfa6fba
ar71xx: use RedBoot parser on PB44
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-11 15:52:47 +00:00
2d08ff0a1b
[atheros] convert to gpiolib
...
Signed-off-by: karlp@tweak.net.au
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-09 07:52:10 +00:00
589a8dfc24
ar71xx: fix WNDR3x00 factory image generation
...
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.
This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:50 +00:00
dbdb71ce8b
ar71xx: fix WNDR3x00 model detection
...
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:39 +00:00
bee30c2698
ramips: fix mac addresses on the DIR-300/600 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 20:06:08 +00:00
77eea315ca
linux: update 3.1 to 3.1.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 19:50:30 +00:00
4baeaf652e
linux: update 3.0 to 3.0.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 19:50:25 +00:00
4636ce7f8a
ar71xx: create firmware image for the TL-WR740N/ND v4 boards
...
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:44 +00:00
33322c055c
ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:43 +00:00
8244420b66
ar71xx: fix TL-MR3x20 profile names in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 13:53:21 +00:00
554d2c4504
ar71xx: cleanup TP-Link profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 10:29:25 +00:00
bdfd4b5e5f
ar71xx: add TP-Link board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:11:01 +00:00
10ebaf63a7
ar71xx: use correct mac on the lan interface on several TP-LINK devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:58 +00:00
9501b2cf37
ar71xx: allow to pass negative offset values for ar71xx_init_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:55 +00:00
8caa31435f
ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:21:15 +00:00
e8c0dabf9a
ar71xx: verify hardware id of firmware images on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:11:51 +00:00
287e495fdd
ramips: set mac addresses for the NBG-419N
...
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:07 +00:00
306d52b8da
ramips: set preinit interface mac on the hw550-3g board
...
Based on a patch by Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:06 +00:00
953b52d306
ramips: use ramips_get_mac_* functions in the preinit script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:04 +00:00
dcaa1e228c
ramips: move ramips_get_mac_* functions to lib/ramips.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:03 +00:00
f2e2c7bc03
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:02 +00:00
d0e8df7341
ramips: fix network configuration setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 16:54:48 +00:00
6356c4e99d
ar71xx: reclaim some unused space on TP-Link boards
...
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:36 +00:00
bb48c3c03e
ar71xx: check squashfs signature in TP-Link mtd parser
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:33 +00:00
c9f52e0adc
ar71xx: use the lzma-loader on TP-Link boards w/o lzma support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:28 +00:00
f59dd2dc3e
ar71xx: add lzma loader
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:25 +00:00
037fc54211
ar71xx: add preliminary support for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:51 +00:00
0eb86d9380
ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:44 +00:00
a86d2fb99b
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
40cbea9b54
[ar71xx] add some missing wndr3800 base-files definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:21 +00:00
65d271e73a
ar71xx: change user-space board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:20 +00:00
32baf22378
ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:47:53 +00:00
0dd3da8e65
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-04 15:24:57 +00:00
e4bdc2f753
ar71xx: use the tp-link parser on the tp-link boards
...
Also remove static partition maps.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:31 +00:00
dc7ac75841
ar71xx: add mtd partition parser for the TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:27 +00:00
f91daa7486
ar71xx: run the RedBoot parser only on the RedBoot based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:25 +00:00
c4126790b7
ar71xx: run the MyLoader parser only on the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:23 +00:00
2216dd22b0
ar71xx: run the wrt160nl parser only on the WRT160NL board
...
Also remove static mtd partition definitions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:20 +00:00
b6c404e141
ar71xx: allow to pass part_probe types to the m25p80 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:18 +00:00
c7c70fbb89
ar71xx: create initramfs images for the newer TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:57:23 +00:00
f706282640
ar71xx: remove swconfig and wpad-mini from custom profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:41 +00:00
e008acff75
ar71xx: add uboot-envtools to the default package list
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:40 +00:00
0f72e36a61
ar71xx: reclaim unused space in WNDR3700/3800 images
...
Patch by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:38 +00:00
d55531f7b7
ar71xx: add a profile and build image for the OM2P board
...
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:05 +00:00
897691c597
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
64834fd3a6
ar71xx: configure default led behavior for the OM2P
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:59 +00:00
7e3d291cee
ramips: enable sysupgrade on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:58 +00:00
15b6e5575c
ramips: wrap long line in platform upgrade script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:57 +00:00
85c9f9860b
ramips: add profile for the Asus RT-N15
...
This uses previously submitted rtl8366 kernel packages.
[juhosg: The kmod-gpio-dev package has been removed from the package list.]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:55 +00:00
d1754575ec
ramips: setup default network configuration for RT-N15
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:54 +00:00
68c76b9f54
ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
...
It is needed by the RT-N15 board.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:53 +00:00
0aaf068e51
ramips: remove default network configuration, and generate that from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:51 +00:00
cebe9384fa
ramips: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:48 +00:00
c2898515e9
ar71xx: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:47 +00:00
46cb8a93ff
ramips: simplify uci-defaults/network script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:45 +00:00
1c16097588
ramips: setup mac and network interfaces from separate functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:43 +00:00
33678d2d30
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:42 +00:00
f25326846b
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:41 +00:00
a253c0d6fb
ramips: fix package name of kmod-input-gpio-buttons
...
Based on a patch from Omnima Limited.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:39 +00:00
12ebf7f0a8
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:38 +00:00
c42e834587
ramips: setup bc2 mac addresses from the generic network script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:37 +00:00
576ea7dee8
ramips: combine network setup for all boards in one file
...
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.
[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:35 +00:00
2b4010111d
omap24xx: bump to 3.1.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28 12:46:18 +00:00
35fe83070a
lantiq: bump to 3.1.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28 10:22:58 +00:00
c2bdcfd9f2
targets: fix CONFIG_USB_STORAGE_* inconsistency
...
* all options were switched from bool to tristate in 2.6.30
* add/change/move them to generic, disabled by default
* remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
* remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
* cleanup ordering
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-25 20:47:44 +00:00
dcab0017e4
ar71xx: modify phy mask of the WP543 board
...
This fixes ethernet on newer boards. Based on a patch from #9702 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:43 +00:00
dc19d51869
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:38 +00:00
1df32b6140
ar71xx: copy atheros initramfs images to the image directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:35 +00:00
f738f055b7
ar71xx: specify mtd layout in command line for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:32 +00:00
78a3a35804
lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
...
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-23 12:22:15 +00:00
3e358d18e2
lantiq:
...
* fixes ath5k eeprom handling
* fixes sx76x
* adds sx76x to userland api
* minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-22 18:50:51 +00:00
3361c4d1bf
[brcm63xx] don't package gpioctl by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-21 16:36:39 +00:00
29e5ed5992
target/uml: export atomic64_* functions on 32-bit x86
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-21 14:28:33 +00:00
4c134d64ea
ar71xx: set GE0 phy_mask for AR933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-20 11:30:10 +00:00
d724cd4a24
[brcm63xx] fix D-Link DSL-2650U image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19 21:34:51 +00:00
16fd48e131
linux: update 3.0 to 3.0.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19 18:39:12 +00:00
7d6a631816
[brcm63xx] build images for D-Link DSL-2650U ( #9003 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-18 10:37:03 +00:00
71954c593e
omap24xx: Fix cbus nested IRQ acking
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 22:31:27 +00:00
b22066dc6f
omap24xx: Fix initialization of software IRQ mask
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 21:02:00 +00:00
d976d63d95
omap24xx: Update 3.1 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 19:35:57 +00:00
53f6feb557
omap24xx: Some retu/tahvo IRQ fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 18:06:19 +00:00
48937bced2
omap24xx: Add basic kexec fixes.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 14:57:34 +00:00
46a5094e4e
omap24xx: Add workaround for omapfb locking bug.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 22:34:38 +00:00
0da89768b6
Revert r29193
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:03:23 +00:00
cf42d675f5
omap24xx: Set platform specific optimization flags
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:02:12 +00:00
59676bb6a3
n810: Add xmodmap to profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:01:19 +00:00
60662c31e9
[rdc] include bridge and 8021q modules by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 22:24:22 +00:00
c8c032629a
lantiq: add runtime generation of /etc/config/network
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 18:21:00 +00:00
8f83f4a62f
lantiq: fix falcon build breakage
...
dev-wifi-rt2x00 fails to build on falcon due to missing pci
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 18:55:58 +00:00
0ec8a8b387
ar71xx: fix USB LED on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:15 +00:00
a8b9399527
ar71xx: add a function for selecting output signal on a given GPIO pin
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:14 +00:00
cee3153f01
ar71xx: fix GPIO function handling on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:13 +00:00
2db6e74505
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:11 +00:00
de3ee69258
ar71xx: merge nand scan patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:10 +00:00
1fdbb4fcbd
ar71xx: fix a compiler warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:47 +00:00
33c5c80fa5
ar71xx: fix GPIO count for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:45 +00:00
54d08f41c9
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:53 +00:00
546895e938
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:51 +00:00
a921ab0827
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:49 +00:00
ed73833a62
ar71xx: add an irq parameter for ar724x_pcibios_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:47 +00:00
6e87fe5dc5
ar71xx: remove hardwired interface parameters from mach-* files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:09 +00:00
6f6b552473
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:07 +00:00
75a8898840
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:05 +00:00
fb3e9ac6b0
[brcm63xx] build images for Pirelli A226M ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:22 +00:00
150feffb3b
[brcm63xx] register uart0 on DWV-S0 boards ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:18 +00:00
dea0392387
[kernel] refresh 3.0 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:14 +00:00
9efe7cdbb7
[kernel] refresh 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:10 +00:00
f849b5a225
[brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:05 +00:00
351f04672c
[rdc] fix typo, load ip17xx switch module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 18:41:26 +00:00
562bd7628c
ar71xx: enable has_gbit flag on AR724{0,1}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 17:36:36 +00:00
81359fd675
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:03 +00:00
23823d7a65
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:01 +00:00
8e7450e3c2
ar71xx: ag71xx: add support for getting switch port link status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:04 +00:00
25722074a3
ar71xx: remove mii_ctrl resources of the ethernet devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:03 +00:00
0e2b6d0d25
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:01 +00:00
f0a3d94dff
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:00 +00:00
51b1d36e03
ar71xx: set MII interface speed from the set_speed callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:59 +00:00
0839b18e6f
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:57 +00:00
7e0c585208
ar71xx: ag71xx: remove MII interface setup code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:56 +00:00
b28f1d9516
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:54 +00:00
819f6df245
ar71xx: fix occasional kernel hangs during boot on AR934x
...
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:52 +00:00
003cbe35e2
ar71xx: refresh kernel patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:51 +00:00
e30803b3df
linux: update 3.1 to 3.1.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 10:48:05 +00:00
b94c5c5031
lantiq: add uci-defaults code for handling leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:21 +00:00
508789fa68
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:16 +00:00
39c1578720
lantiq: rename leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:12 +00:00
a7830ac4e2
lantiq: split compat headers out of bsp header patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:07 +00:00
4d22bffe5b
lantiq: adds hotplug handler for loading rt2x00 firmware
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:01 +00:00
e685dc989d
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:39:56 +00:00
5d23a8d4b2
lantiq: cleanup default package selection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:39:51 +00:00
a6a4c7a38a
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 18:41:15 +00:00
be0c011b6e
kernel: ar8216: add support for the AR8236 switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 14:09:52 +00:00
663c9eaaa1
kernel: ar8216: move port vlan setup into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 14:09:50 +00:00
96e3c5d0b8
ar71xx: use the button for WPS control on the DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:20 +00:00
0b8f0e8e22
ar71xx: register the second ethernet interface on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:19 +00:00
547b567ada
ar71xx: implement SoC specific phy interface setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:18 +00:00
Gabor Juhos
Hauke Mehrtens
Jonas Gorski
Jo-Philipp Wich
Florian Fainelli
John Crispin
Imre Kaloz
Felix Fietkau
Daniel Dickinson
Nicolas Thill
Michael Büsch