Commit Graph

754 Commits (0d7130a68ff89f2f5479b8d78e26fddfe7b9c665)

Author SHA1 Message Date
Florian Fainelli d558e58172 [kernel] add ignore_oc in struct ehci_hcd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-10 11:37:21 +00:00
Jonas Gorski 4c03d36b1b bcm63xx: add support for linux 3.1-rc1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27941 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-09 12:19:49 +00:00
Florian Fainelli fc87157651 [brcm63xx] add support for BCM6345 Ethernet DMA engine
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-02 18:55:55 +00:00
Florian Fainelli c6242377bd [brcm63xx] improve BCM6345 support
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-02 18:55:46 +00:00
Jonas Gorski 66421cdc87 bcm63xx: Fix SPI commands and register offsets for BCM6348
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-25 19:52:47 +00:00
Florian Fainelli f780ffc6fd [brcm63xx] add ehci support to DWV-S0 board (#9059)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-16 08:39:04 +00:00
Florian Fainelli 1218fd06fb [brcm63xx] fix GEN_SPI_RSET_BASE macro (#9697)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-13 09:33:11 +00:00
Florian Fainelli 88704d73bb [brcm63xx] move board_HW553 inside the ifdef ..BCM6358 .. endif block
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 10:00:39 +00:00
Daniel Dickinson 297aefe3b4 [brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 06:35:24 +00:00
Daniel Dickinson 81e08b77c2 [brcm63xx] profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06 06:35:22 +00:00
Florian Fainelli 5e1e039c45 [brcm63xx] hw553: fix missing has_uart0 in board definition (#9533)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04 15:04:58 +00:00
Hauke Mehrtens 210af3e57c kernel: update kernel to 2.6.39.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 19:30:58 +00:00
Hauke Mehrtens b5051f91ff kernel: update ssb and bcma to linux-next next-20110627
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 21:28:40 +00:00
Florian Fainelli fa61065873 [brcm63xx] remove gpiodev, prefer sysfs gpio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 19:26:17 +00:00
Florian Fainelli d72a90ee7b [brcm63xx] register SSB sprom after ethernet devices
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-22 12:32:03 +00:00
Florian Fainelli 16a2b890cf [brcm63xx] fix tab damage in 141-led_count.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:58 +00:00
Florian Fainelli a104f95d05 [kernel] fix and make usable kmod-pcmcia-rsrc
This module is also needed for e.g: kmod-bcm63xx-pcmcia

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:53 +00:00
Florian Fainelli 46c6ee1ca7 [brcm63xx] use macros to generate SPI registers table and switches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 10:05:51 +00:00
Florian Fainelli d2e81efd80 [brcm63xx] dev-spi.c checks for running CPU, not board code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:46:00 +00:00
Florian Fainelli 35faebfc51 [brcm63xx] fixup patches after r27234
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:28:38 +00:00
Florian Fainelli 333e68fdfd [brcm63xx] remove accidental bcm6345 related patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:16:59 +00:00
Florian Fainelli f41477ce57 [brcm63xx] remove support for 2.6.37 and 2.6.38
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:14:22 +00:00
Florian Fainelli 0103e97008 [brcm63xx] switch to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:12:45 +00:00
Florian Fainelli ab7d434b54 bcm63xx: Add support for Linux 3.0-rc3
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:40 +00:00
Florian Fainelli 8cdbf2c4b6 bcm63xx: Add support for 2.6.39
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:52 +00:00
Florian Fainelli 8dbfe7ca11 bcm63xx: Add support for 2.6.38
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:48 +00:00
Florian Fainelli e95dc4b5c1 [brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:53:00 +00:00
Florian Fainelli f1e6eb88e8 [brcm63xx] renumber patches accordingly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:52:56 +00:00
Florian Fainelli 9601ce7e1f [brcm63xx] renumber board patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 12:09:15 +00:00
Florian Fainelli 195f49f69c [brcm63xx] add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:25 +00:00
Florian Fainelli c24a32df6f [brcm63xx] add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:22 +00:00
Florian Fainelli 4b5cddfaca [brcm63xx] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:18 +00:00
Florian Fainelli a6aa5507e7 [brcm63xx] add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:15 +00:00
Florian Fainelli 764614896e [brcm63xx] add support for BT Voyager 2500 (#9070)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:07 +00:00
Florian Fainelli 05bf83accb [brcm63xx] add support for USR9108 LEDs (#9372)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:04 +00:00
Florian Fainelli 0da640db3b bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:34:14 +00:00
Florian Fainelli 93e4186e52 bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:50 +00:00
Florian Fainelli bc014cb9cd bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:45 +00:00
Florian Fainelli 2811523f2c bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:41 +00:00
Florian Fainelli b8f0b2b785 [kernel] fill maintainer infos for a couple of targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-06 12:37:36 +00:00
Hauke Mehrtens 580cad4b9b brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-05 14:05:21 +00:00
Hauke Mehrtens a6d76eb003 brcm47xx: add fallback sprom for pci devices without an own sprom.
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an 
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-01 20:28:35 +00:00
Felix Fietkau 026165ed70 brcm63xx: remove patches/configs for 2.6.35
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 18:39:46 +00:00
Daniel Dickinson 2bfbe9f602 [brcm63xx] Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-17 01:15:47 +00:00
Daniel Dickinson 7c6472a3db [brcm63xx] Generate images for RTA1320_16M-based routers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 14:31:36 +00:00
Daniel Dickinson b2ae50ed27 bcm63xx: Move the OpenWrt rootfs length field
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 12:18:25 +00:00
Hauke Mehrtens 5fb18eaef8 kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03 13:59:07 +00:00
Daniel Dickinson 5a76d52bf8 [brcm63xx] Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-31 06:16:23 +00:00
Florian Fainelli e844751afa bcm63xx: Really fix the flash driver in 2.6.37
Read back the actual rootfs length from the image tag.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25938 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-07 16:55:01 +00:00
Florian Fainelli 78f95daf33 [brcm63xx] fix patches after 2.6.37 update, patch from KanjiMonster
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-01 16:02:38 +00:00
Florian Fainelli 7bfdfcc4bd [brcm63xx] add support for 2.6.37, patches from KanjiMonster
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 19:59:22 +00:00
Florian Fainelli 2ec15bd5be [brcm63xx] add support for HW553 bcm6358-based boards (#8844)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 15:44:06 +00:00
Florian Fainelli 3cea035cac [brcm63xx] add support for 'MAGIC' bcm6348-based board
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.

I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )

Thanks to KanjiMonster for the support on the IRC channel.

Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 12:44:27 +00:00
Florian Fainelli 0a5005e824 [kernel] update to 2.6.35.11
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 12:44:16 +00:00
Florian Fainelli 239a77ed96 [brcm63xx] fix T-Com Speedport W 500V default config
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-09 13:09:02 +00:00
Florian Fainelli 405d9f27b2 [brcm63xx] fix build of brcm-wl
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-08 13:46:12 +00:00
Florian Fainelli 4e2d90b5b8 [brcm63xx] give some credits to Tanguy Bouzeloc in the spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 02:11:08 +00:00
Florian Fainelli 29481143bf [brcm63xx] multiple SPI driver fixes
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts

Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-29 16:19:59 +00:00
Daniel Dickinson a6ec44df02 [brcm63xx] patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 08:10:32 +00:00
Daniel Dickinson cec3802964 [brcm63xx] patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 04:05:04 +00:00
Florian Fainelli 62f90595e1 [brcm63xx] spi driver: remove bcm_rset usage
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced  by
"bs->regs" field for all I/O operation.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-28 00:24:50 +00:00
Daniel Dickinson ec103967cb Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:18:13 +00:00
Daniel Dickinson dda75774e9 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:18:04 +00:00
Daniel Dickinson d93fac4436 mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26 04:17:56 +00:00
Daniel Dickinson 16c44de3e9 [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 18:59:58 +00:00
Daniel Dickinson 7b9da8d0b0 [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:31 +00:00
Daniel Dickinson de92064134 [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:28 +00:00
Daniel Dickinson 374672d6c0 [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 00:40:24 +00:00
Daniel Dickinson 75c9c63874 [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 17:32:29 +00:00
Daniel Dickinson b32148f92f Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 17:02:31 +00:00
Daniel Dickinson cb1024cc90 [brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T.
Thanks blunoise

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 16:42:23 +00:00
Daniel Dickinson 194d1e24c0 [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:54 +00:00
Daniel Dickinson efe3905b6c [brcm63xx] patches: Refreshed patches after led_count
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:51 +00:00
Daniel Dickinson 5ac34fd9f0 [brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:47 +00:00
Daniel Dickinson 903d1b5311 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07 15:15:41 +00:00
Daniel Dickinson 5700d60a40 [brcm63xx] base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 06:46:03 +00:00
Daniel Dickinson 6407278c23 [brcm63xx] board definition: Fixed CPVA642 LED definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 06:45:57 +00:00
Daniel Dickinson a67ee8325d [brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 04:31:23 +00:00
Daniel Dickinson 36114ce181 [bcm63xx] base-files: Added network defconfig because board only has one ethernet (4-port switch)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06 02:01:08 +00:00
Daniel Dickinson 9b5364abf2 [brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:13:00 +00:00
Daniel Dickinson 0c4e2c5526 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:44 +00:00
Daniel Dickinson 68981f5d8e bcm63xx: Add board id override fixup.
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:40 +00:00
Daniel Dickinson e96cc39f19 bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:36 +00:00
Daniel Dickinson e21b57d529 bcm63xx: Allow 'colored' power leds.
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:30 +00:00
Daniel Dickinson 94a1adaf05 bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:26 +00:00
Daniel Dickinson f78d9eebba bcm63xx: Add defconfigs.
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28 22:04:19 +00:00
Imre Kaloz 1ae1fb6b50 update to the latest stable kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 18:50:11 +00:00
Daniel Dickinson ed589945f0 [brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 11:06:13 +00:00
Daniel Dickinson 53af0d5fbb [brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 20:17:08 +00:00
Daniel Dickinson 4470bf532c [brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-19 13:41:54 +00:00
Daniel Dickinson caefcca898 [tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool.
* Rewrote commandline parsing code using gengetopt
		- We now get long options
		- We have more options including use of the info section for 
			board information (e.g. to add the same boardid but
			different GPIOs on different routers)
	* Added back the ability to write stock images (this is useful, for example,
		when copying the firmware from the in-memory flash, and then being
		able to create an image that will let you revert to/test stock firmware
	* Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0)
	* Added ability to use all sections of the imagetag, including custom magic 
	 	signatures (e.g. for the Telsey router I'm adding soon), info sections,
		and reserved sections
	* Added putting the router type (as defined in the image generating Makefile)
		into the info1 section and the filesystem type in the info2 section.
		This will be used by mtd (when I add the code) to return the name of
		image used to flash this router.  (As requested by Jo, as well as being
		useful for same boardid different board scenario described above).



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 06:46:53 +00:00
Claudio Mignanti dcc7bd0d17 [brcm63xx] Add wps button on alice gate
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06 21:08:44 +00:00
Imre Kaloz a497060e39 update kernels to 2.6.32.25 and 2.6.35.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 09:01:08 +00:00
Florian Fainelli 27c9658984 [brcm63xx] register uart driver on livebox (#8013)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27 10:02:13 +00:00
Florian Fainelli b024c3f927 [brcm63xx] refresh 2.6.35 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27 10:02:08 +00:00
Claudio Mignanti 307bfbe677 [brcm63xx] Fix nxp_74hc164 driver compile error (builbot)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-24 16:10:41 +00:00
Florian Fainelli 4701c8448b [brcm63xx] fix platform_devices registration
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-18 19:49:54 +00:00
Florian Fainelli 6591e5b4dd [brcm63xx] add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 17:45:50 +00:00
Florian Fainelli f46ab7dcae [brcm63xx] remove 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 16:32:35 +00:00
Florian Fainelli f320f07d40 [brcm63xx] fix SPI driver, move register out of driver code
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:30 +00:00
Florian Fainelli a52f0a386a [brcm63xx] restore kernel oldconfig
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:24 +00:00
Florian Fainelli bfa00c8c0b [brcm63xx] refresh patches
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:09:04 +00:00
Florian Fainelli 5eb60cbbf7 [brcm63xx] refresh nb4 support. Register 74x164 device
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:57 +00:00
Florian Fainelli 43a07c2197 [brcm63xx] add spi devices board info int bcm63xx_boards
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:51 +00:00
Florian Fainelli 193172120b [brcm63xx] add 74x164 SPI chip support
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:45 +00:00
Florian Fainelli 7475affd50 [kernel] backport SPI master with no RXTX support (from 2.6.36)
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:39 +00:00
Florian Fainelli 292e6071e4 [brcm63xx] register earlier extended platform devices
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 14:08:34 +00:00
Lars-Peter Clausen dd2a52b3a0 [kernel] update 2.6.35.x to 2.6.35.7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04 07:42:32 +00:00
Florian Fainelli 2e243c343e [brcm63xx] remove wpa-supplicant and iw from the Tecom GW6x00 profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-13 08:30:35 +00:00
Florian Fainelli 36ab483f47 [brcm63xx] default to using 2.6.35
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:53 +00:00
Florian Fainelli 97a561ae31 [brcm63xx] remove 2.6.33 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:47 +00:00
Florian Fainelli e79fccc1da [brcm63xx] change the Tecom GW6x00 profile to use wl instead of b43
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:41 +00:00
Florian Fainelli 61db512e5c [brcm63xx] register udc and spi devices at the correct init level
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:35 +00:00
Florian Fainelli 3506323f4a [brcm63xx] refresh 2.6.35 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:23:29 +00:00
Jo-Philipp Wich 229d390a6c [linux] enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-30 22:59:20 +00:00
Florian Fainelli 79cda87dc5 [brcm63xx] add 2.6.35 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-25 19:56:08 +00:00
Florian Fainelli 53fe275b46 [kernel] update to 2.6.32.20
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-22 17:07:37 +00:00
Daniel Dickinson dfda352bca [brcm63xx]: base-files: diag.sh: For power button as preinit status led, end with led left on, not off
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:33:08 +00:00
Daniel Dickinson 8b6a51edad [brcm63xx] base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:32:59 +00:00
Daniel Dickinson ba4b087197 [brcm63xx] patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 19:32:40 +00:00
Jo-Philipp Wich 514d70b175 [brcm63xx] reorder profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-26 18:58:35 +00:00
Jo-Philipp Wich 80edf72017 [brcm63xx] fix a typo in 040-bcm963xx_flashmap.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-25 00:10:37 +00:00
Imre Kaloz 0b47979d12 update kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-19 11:34:03 +00:00
Florian Fainelli c8c989694d [brcm63xx] fix alice gate2 internet:green led (#6743)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-18 10:29:44 +00:00
Jo-Philipp Wich 1cff76c4b1 [brcm63xx] add required exports for wl.ko
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 17:03:56 +00:00
Claudio Mignanti 33990405fb massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12 14:06:13 +00:00
Jo-Philipp Wich dc8d0d6700 [brcm63xx] add a wifi profile for proprietary wl
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01 01:39:04 +00:00
Florian Fainelli e5e370a876 [brcm63xx] add missing alice gate2 leds (#6743)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-13 12:20:53 +00:00
Florian Fainelli 924c09e04c [brcm63xx] do not override cfg80211-related config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12 18:10:16 +00:00
Gabor Juhos 93df402589 generic: move more common options to generic configuration
* CONFIG_ABX500_CORE
 * CONFIG_ATOMIC64_SELFTEST
 * CONFIG_BRIDGE_IGMP_SNOOPING
 * CONFIG_CAIF
 * CONFIG_CEPH_FS
 * CONFIG_CRYSTALHD
 * CONFIG_DEFAULT_SECURITY_SELINUX
 * CONFIG_DEFAULT_SECURITY_SMACK
 * CONFIG_DEFAULT_SECURITY_TOMOYO
 * CONFIG_DT3155
 * CONFIG_IP_MROUTE_MULTIPLE_TABLES
 * CONFIG_L2TP
 * CONFIG_LOGFS
 * CONFIG_LPC_SCH
 * CONFIG_MFD_JANZ_CMODIO
 * CONFIG_MFD_RDC321X
 * CONFIG_N_GSM
 * CONFIG_RAMOOPS
 * CONFIG_SERIAL_ALTERA_JTAGUART
 * CONFIG_SERIAL_ALTERA_UART
 * CONFIG_SERIAL_TIMBERDALE
 * CONFIG_SM_FTL
 * CONFIG_SQUASHFS_XATTRS


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 10:45:51 +00:00
Gabor Juhos 9ac326cb5e generic: move some common symbols to generic configuration
* CONFIG_MUTEX_SPIN_ON_OWNER
 * CONFIG_DEFAULT_HYDLA
 * CONFIG_DEFAULT_VENO


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 08:58:14 +00:00
Gabor Juhos 26eef8e23a generic: standardize CONFIG_INLINE_* symbols usage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-10 08:09:41 +00:00
Daniel Dickinson 9a6f5981fe brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 02:04:56 +00:00
Daniel Dickinson 1f0332b969 brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:44:37 +00:00
Daniel Dickinson 03a1fd3779 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:20 +00:00
Daniel Dickinson d0f8de305f brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:33:09 +00:00
Daniel Dickinson f8e8dcf746 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:58 +00:00
Daniel Dickinson 089ea4a93c brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 01:32:47 +00:00
Nicolas Thill de002a7d39 update linux kernel to 2.6.32.14
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-27 18:09:09 +00:00
Nicolas Thill 6598259ef5 target/linux: refresh 2.6.32 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-24 20:35:46 +00:00
Hauke Mehrtens 0710ef015d kernel: update kernel to version 2.6.32.13 and 2.6.33.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-23 13:16:51 +00:00
Florian Fainelli bc4ae75a7d [brcm63xx] revert r21085, fixes #7282
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-04 08:07:39 +00:00
Florian Fainelli 4a0dfb52df [brcm63xx] do not write to per-port over-current register, which is bogus (#6898)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-02 19:14:10 +00:00
Raphaël HUCK ea459f4e40 [brcm63xx] rename reset_buttons to buttons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:54:24 +00:00
Raphaël HUCK bcca3791ea [brcm63xx] add WPS button support for nb4 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:51:41 +00:00
Raphaël HUCK edea3f2ecf [brcm63xx] fix gpio button key code, match button-hotplug code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:51:02 +00:00
Raphaël HUCK 7e2975d848 [brcm63xx] fix gpio_button device register
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 12:50:09 +00:00
Raphaël HUCK b73d20640c [brcm63xx] fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-28 12:30:32 +00:00
Raphaël HUCK 2c0aef5df7 [brcm63xx] extend bcm63xx_wdt driver for debugging purposes, thx Miguel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis 9c40666ff7 sync to kernel 2.6.32.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 14:30:08 +00:00
Raphaël HUCK 42c03f1014 [brcm63xx] add neufbox 4 board support, thx Miguel & Florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:49:31 +00:00
Raphaël HUCK 2d2a23e097 [brcm63xx] add NXP 74HC164 chip driver support, thx Miguel & Florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:48:26 +00:00
Raphaël HUCK fc8e17eeed [brcm63xx] add extended platform devices patch, thx Miguel & Florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-27 13:46:22 +00:00
Florian Fainelli 6edaad0b91 [brcm63xx] fix spi chip select configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 13:33:48 +00:00
Florian Fainelli 698761efeb [brcm63xx] fix bcm6358 spi base register address (#7234)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21163 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 09:22:27 +00:00
Florian Fainelli 6ad5cee86b [brcm63xx] the SPI_CMD register is 16-bits wide
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 09:22:23 +00:00
Nicolas Thill d96335b041 package/kernel: move PCMCIA modules to their own file & submenu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 13:53:31 +00:00
Nicolas Thill ae9b96421b package/kernel: move target specific modules to their own target files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 13:34:51 +00:00
Florian Fainelli 3ac4c866a3 [brcm63xx] register spi controller, remove whitespaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:49 +00:00
Florian Fainelli 593cba7b0a [brcm63xx] resync 2.6.33 mtd patch with the one for 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:44 +00:00
Florian Fainelli fada783102 [brcm63xx] fix wrong refresh on flashmap patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 16:35:01 +00:00
Florian Fainelli 2c1712ef73 [brcm63xx] re-instate SPI support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:51 +00:00
Florian Fainelli 01085b1245 [brcm63xx] refresh 2.6.32 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:46 +00:00
Florian Fainelli 15dd10237e [brcm63xx] alwasy read imagetag with 64K erase block size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 15:27:42 +00:00
Gabor Juhos a0a67ed366 kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 07:12:09 +00:00
Daniel Dickinson a471baeb22 tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-14 00:45:48 +00:00
Nicolas Thill 9d42bb1a21 define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12 23:15:56 +00:00
Florian Fainelli 393df13165 [brcm63xx] do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 18:43:36 +00:00
Florian Fainelli 9b32abb33e [brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct
combining the elements so that it is no longer necessary to create an openwrt-only
tagid and tagcrc, and elimate the tagid detection and switch statements which
made dealing with imagetags overly complicated, especially since the logic would
need analogs in all code that touched the imagetag. Patch from cshore.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-01 21:20:43 +00:00
Florian Fainelli dc3662326e [brcm63xx] move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 18:11:06 +00:00
Gabor Juhos 8e67ddaccc kernel: update to 2.6.32.10
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 10:45:25 +00:00
Florian Fainelli ec5ebe1160 [brcm63xx] drop support for 2.6.30 kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 10:12:48 +00:00
Florian Fainelli f98aab2b04 [brcm63xx] add support for D4PW board, patch from mexit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25 12:06:01 +00:00
Florian Fainelli 26b6c87a9a [brcm63xx] refresh 2.6.32 patches, fix livebox support (#6821)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-14 16:21:28 +00:00
Nicolas Thill f71d2a3f8e do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-11 09:50:11 +00:00
Florian Fainelli 2abf2ff310 [brcm63xx] do not register devices in device_initcall level, this breaks the SSB SPROM registration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 21:49:37 +00:00
Florian Fainelli b49f5fd5b0 [brcm63xx] remove mail headers from patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 14:55:34 +00:00
Florian Fainelli 5d3c2f9bf1 [brcm63xx] add support for 2.6.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 21:24:34 +00:00
Florian Fainelli cbe9203123 [brcm63xx] add support for 2.6.32, dropped the SPI patch for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 20:50:51 +00:00
Florian Fainelli 4d33e84269 [brcm63xx] build images for RG100A (bcm6358-based boards) (#6755)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:39 +00:00
Florian Fainelli ca64c45c76 [brcm63xx] fix gpio-leds registration for boards having less than 8 LEDs (#6528)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-21 14:27:17 +00:00
Florian Fainelli f0e60800b4 [brcm63xx] fix the receiving of packets with a 1500 mtu and vlan enabled (#6698)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 11:56:13 +00:00
Imre Kaloz 66ee5acfff clean up handling of some kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-11 09:33:16 +00:00
Florian Fainelli 0362ea3294 [brcm63xx] fix printing of mtd offsets, remove whitespaces.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 21:37:25 +00:00
Florian Fainelli a300ad427a [brcm63xx] move files to files-2.6.30, to ease newer kernel integration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 21:00:50 +00:00
Daniel Dickinson 89c1c5f5f4 brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19361 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28 16:54:00 +00:00
Felix Fietkau 9cc7c86126 replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-23 17:21:18 +00:00
Daniel Dickinson c0c8556ba8 Fix typo in AGPF_S0 reset button definition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-16 03:13:56 +00:00
Claudio Mignanti e17e2be08e bcm63xx: add gpio leds to alice gate
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-15 13:30:46 +00:00
Florian Fainelli 2de49087ef [kernel] update to 2.6.30, refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-04 14:52:45 +00:00
Felix Fietkau cceb3dffcf kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-29 14:31:55 +00:00
Florian Fainelli 29de13ad8f [brcm63xx] add support for the RTA1025W_16 board (#5979)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-22 14:53:20 +00:00
Imre Kaloz 156fc688cb some more Kconfig symbol move..
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:52:41 +00:00
Imre Kaloz 9d5ce6e269 another round of kernel config cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:42:24 +00:00
Imre Kaloz ff8305e702 sort all target config files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 09:27:13 +00:00
Florian Fainelli fee653c749 [brcm63xx] merge upstream fixes on mdio loop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-07 12:48:17 +00:00
Florian Fainelli 26738bea21 [brcm63xx] images without tagid now fallback to the untouched partition layout (#6093)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03 19:59:04 +00:00
Florian Fainelli 03b0af7593 [kernel] remove no longer used configs and patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30 09:55:53 +00:00
Florian Fainelli 297d0b6536 [brcm63xx] do not generate trx images, this is useless
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 13:39:29 +00:00
Florian Fainelli 23398f1831 [brcm63xx] remove 2.6.28 support, we never really used it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 21:13:46 +00:00
Florian Fainelli 1a39f664cb [brcm63xx] switch to 2.6.30.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25 21:10:53 +00:00
Florian Fainelli d5ce9d0af9 [kernel] update to 2.6.27.35
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-23 09:12:17 +00:00
Nicolas Thill 81ae5e6bed [kernel] brcm63xx: fix cardbus support with BCM6358 (closes: #5918)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-05 20:40:05 +00:00
Andy Boyett e44c2d2d14 [generic-2.6] move IMAGE_CMDLINE_HACK default to generic from targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-05 17:05:34 +00:00
Imre Kaloz 69a107aa04 update to latest 2.6.27 and 2.6.30 kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-17 11:22:33 +00:00
Florian Fainelli f699b39f6f [kernel] update to 2.6.27.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-11 07:45:08 +00:00
Gabor Juhos 822c6f29e0 kernel: get rid of the simple_prom_emulator, it is not really useful
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-10 18:30:20 +00:00
Gabor Juhos a1d5e060e3 kernel: add generic image_cmdline hack to MIPS targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-10 18:30:01 +00:00
Florian Fainelli ab91958046 [kernel] update to 2.6.27.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-09 07:13:09 +00:00
Florian Fainelli ddce282a1f [brcm63xx] prevent gpio-buttons registration failure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-08 15:24:06 +00:00
Florian Fainelli c157373236 [brcm63xx] fix typos against the gpio buttons driver (#5804)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-07 18:17:45 +00:00
Florian Fainelli 31de48c7d8 [brcm63xx] add infrastructure to register gpio-input reset button
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-06 13:54:17 +00:00
Florian Fainelli af3d584ce7 [brcm63xx] fix reboot hang on bcm6345, thanks AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-02 08:32:00 +00:00
Florian Fainelli 02e19f8d5e [kernel] switch to 2.6.27.30
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-17 09:17:06 +00:00
Florian Fainelli 2371d7016c [brcm63xx] add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-12 08:41:47 +00:00
Florian Fainelli cbd3f96b0d [brcm63xx] fix typo, INT_MASK is writable, INT_STATUS is not
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-11 18:57:04 +00:00
Florian Fainelli 6ad8618e31 [brcm63xx] more bcm63xx definition fixes, thanks AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-11 18:50:07 +00:00
Florian Fainelli 1c49507d80 [brcm63xx] add support for the Pirelli AG226G board (#5337)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:19:47 +00:00
Florian Fainelli d7ff5b45f6 [brcm63xx] remove useless hard reset in the SPI controller driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:18:30 +00:00
Florian Fainelli 6ed6216d1c [brcm63xx] fix assignment instead of comparison in the mtd driver (#5649)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 10:08:07 +00:00
Florian Fainelli 32a9f72ea2 [brcm63xx] merge upstream fixes for bcm63xx_enet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-08 11:25:36 +00:00
Florian Fainelli 033116d210 [brcm63xx] bcm6345 fixes from AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 20:33:42 +00:00
Florian Fainelli 3c0efe2dec [brcm63xx] fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 18:53:44 +00:00
Florian Fainelli 1bfab34d40 [brcm63xx] disable watchdog for bcm6345 until it gets fixed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-06 18:44:20 +00:00
Florian Fainelli c4ef19ed00 [brcm63xx] fix printing of offsets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-02 13:50:39 +00:00
Florian Fainelli 8bbea0d1bc [brcm63xx] add experimental support for 2.6.30.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-01 16:56:36 +00:00
Florian Fainelli af59e48234 [brcm63xx] more bcm6345 fixes and definitions, thanks to AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 20:15:43 +00:00
Florian Fainelli 20cf07cefb [kernel] refresh 2.6.27 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 11:10:20 +00:00
Florian Fainelli c5be44cf5e [kernel] update to 2.6.27.29
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 11:09:27 +00:00
Florian Fainelli 8426afed36 [brcm63xx] generate images for RTA1025W_16-based routers (#5594)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 10:47:00 +00:00
Florian Fainelli 35815395ca [brcm63xx] add experimental support for 2.6.28.10, tested on bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-30 21:29:25 +00:00
Florian Fainelli 0ba41d0ebc [brcm63xx] enable 6345 support now that it boots up to user-space
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 23:04:58 +00:00
Florian Fainelli fd243ab4c9 [brcm63xx] fix typo for the flash start address on bcm6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 22:31:28 +00:00
Florian Fainelli dcd1e5acd9 [kernel] switch to 2.6.27.28
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-27 10:01:33 +00:00
Florian Fainelli d5ddfb1048 [brcm63xx] fix malformed patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-25 16:18:02 +00:00
Florian Fainelli ad41f0188a [brcm63xx] bcm6345 does not seem to handle r4k_wait correctly, disable it (#5474)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-24 20:25:31 +00:00
Florian Fainelli 78b101cefc [kernel] use 2.6.27.7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-24 17:03:03 +00:00
Florian Fainelli 349a74df53 [brcm63xx] fix typos introduced in 16942
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-21 12:22:01 +00:00
Florian Fainelli cf6b6ea15b [brcm63xx] make the ethernet driver compile with newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-21 11:48:08 +00:00
Florian Fainelli 668b85c3ed [brcm63xx] request irq with the platform driver name instead of bus_id which is being removed in newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-20 10:52:08 +00:00
Florian Fainelli f085bee463 [brcm63xx] we are using the default-on trigger for power LEDs, no need to change their state from userspace
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 09:27:33 +00:00
Florian Fainelli c6ab7daf85 [brcm63xx] register GPIO-connected LEDs for known boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 00:40:23 +00:00
Florian Fainelli e68a9dd226 [brcm63xx] mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-17 15:58:06 +00:00
Florian Fainelli 4907e1e896 [brcm63xx] fix comment only valid for bcm6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-17 15:57:09 +00:00
Florian Fainelli 5017612ffd [brcm63xx] resync kernel configuration and enable kexec
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-12 11:31:00 +00:00
Florian Fainelli f292ca7950 [brcm63xx] add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-06 11:28:34 +00:00
Florian Fainelli 8592d505b5 [brcm63xx] add a profile with no Wi-Fi drivers enabled, useful for bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-06 11:21:22 +00:00
Florian Fainelli 5c6d0f4dbd [kernel] update to latest 2.6.27.26 stable kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-03 09:31:52 +00:00
Florian Fainelli 4bbd24f57f [brcm63xx] add the infrastructure to use a MPI/GPIO connected VoIP DSP
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-01 21:00:41 +00:00
Florian Fainelli 7bba3b72d7 [brcm63xx] fixes for the bcm6338 clocks, thanks Maxime
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-01 13:49:20 +00:00
Florian Fainelli 1850996a1b [brcm63xx] a couple of more fixes to get 6345 booting up to the console handover
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-30 13:45:49 +00:00
Florian Fainelli 73821328e6 [brcm63xx] shared DMA zone is twice smaller on 6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 20:06:44 +00:00
Florian Fainelli 9f14950a67 [brcm63xx] turn on size optimization for bcm63xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 20:06:13 +00:00
Florian Fainelli 61bd4183a5 [brcm63xx] off-by-one gpio numbers for bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-28 04:23:11 +00:00
Florian Fainelli 93039fd66e [brcm63xx] bcm6338 can support PCI since it has MPI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 21:43:55 +00:00
Florian Fainelli c6eb086771 [brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 20:32:43 +00:00
Florian Fainelli d0c0b1b484 [brcm63xx] fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:58:00 +00:00
Florian Fainelli 53035bf4e2 [brcm63xx] fix a stupid typo preventing the board from being detected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:30:45 +00:00
Florian Fainelli d1867359ac [brcm63xx] prevent bcm6338 and bcm6345 from crashing very early
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 18:23:58 +00:00
Florian Fainelli 79422ea720 [brcm63xx] only register fallback sprom and enable PCI if we actually have support for PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 16:17:18 +00:00
Florian Fainelli ed819b628a [brcm63xx] do not bloat the kernel with experimental bcm6345 for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 15:52:03 +00:00
Florian Fainelli b89b571a5a [brcm63xx] more missing register definitions for bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 15:51:27 +00:00
Florian Fainelli e430ad8740 [brcm63xx] more bcm6338 and bcm6345 related fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 12:34:35 +00:00
Florian Fainelli 5857eee187 [brcm63xx] define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 11:08:12 +00:00
Florian Fainelli 076ac8ee88 [brcm63xx] generate images for the bcm6338w
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 10:27:37 +00:00
Florian Fainelli 9fb3d8efcb [brcm63xx] add board definitions for the bcm6338w
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-26 10:27:13 +00:00
Florian Fainelli e951c62e47 [brcm63xx] add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-18 15:00:32 +00:00
Florian Fainelli 3135ca9da0 [brcm63xx] generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17 13:16:59 +00:00
Florian Fainelli f5818c9e93 [kernel] use 2.6.27.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17 08:46:47 +00:00
Imre Kaloz ee96d3dee8 use the same i/o schedulers for all targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-15 20:43:02 +00:00
Florian Fainelli 2af8093895 [brcm63xx] use build system REVISION variable (#5317)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 13:43:48 +00:00
Florian Fainelli 2670ed1229 The attached patch adds building of firmware
images for more routers based on the brcm63xx chipset.

Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 08:24:13 +00:00
Florian Fainelli 9e9714f004 [brcm63xx] cleanup the watchdog driver a bit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 21:35:51 +00:00
Florian Fainelli 1726b10d08 [brcm63xx] fix the watchdog driver and enable it by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 21:28:15 +00:00
Florian Fainelli 3339e02ed8 [brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known
imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 08:04:52 +00:00
Florian Fainelli f012e61a4f [brcm63xx] remove this line which got accidentaly succesfully applied, but should not have (#5285)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-08 13:42:11 +00:00
Florian Fainelli da93c74c84 [brcm63xx] fix ethernet driver removal
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:04:53 +00:00
Florian Fainelli dbbeab5dbd [brcm63xx] fix pcmcia device removal
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:04:11 +00:00
Florian Fainelli 93ac56d798 [brcm63xx] add missing null entry in pcmcia driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:03:41 +00:00
Florian Fainelli e41524a298 [brcm63xx] request gpio pins and set direction correctly for pcmcia
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:03:03 +00:00
Florian Fainelli 6f2968d917 [brcm63xx] be SMP safe even with gpiolib
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:02:23 +00:00
Florian Fainelli 5d27e16f2e [brcm63xx] cache gpio values in gpio_set
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:01:55 +00:00
Florian Fainelli b904d67782 [brcm63xx] use the correct number of GPIOs for bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 10:01:03 +00:00
Florian Fainelli b86d85140f [brcm63xx] register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-04 09:59:28 +00:00
Florian Fainelli 11d0b7ea0a [brcm63xx] merger mtu/802.1q related fixes:
bcm63xx integrated ethernet mac supports receiving and sending frames
bigger than 1500 bytes, this patch adds support for changing MTU.

This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-03 08:55:18 +00:00
Florian Fainelli 693f304923 [brcm63xx] backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-01 18:27:51 +00:00
Florian Fainelli bc947f05ed [brcm63xx] include wpa-supplicant iw in the default profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-29 15:33:14 +00:00
Florian Fainelli ca28a81e80 [brcm63xx] also include the SPI driver in the gw6x00 profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-26 11:15:27 +00:00
Florian Fainelli 852a43eef9 [brcm63xx] include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-26 10:25:55 +00:00
Florian Fainelli 90a0ecd275 [brcm63xx] add the Tecom GW6x00 (6000 and 6200) board profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-25 16:14:13 +00:00
Florian Fainelli 13242dd7c2 [kernel] update to new stable 2.6.27.24
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-20 09:00:09 +00:00
Florian Fainelli 78aacb8183 [kernel] disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-19 18:15:19 +00:00
Imre Kaloz 69d2976c5d even more config file cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-18 13:21:25 +00:00
Florian Fainelli 5e4b863164 [brcm63xx] add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-18 11:11:23 +00:00
Florian Fainelli d30d9400c0 [brcm63xx] add support for sysupgrade (#5117)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-17 16:53:57 +00:00
Imre Kaloz c8c98cdd14 config cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 10:40:04 +00:00
Imre Kaloz 4977bd6134 cardbus != pcmcia -- disable it in b43
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 08:58:02 +00:00
Florian Fainelli 7136fa07ee [brcm63xx] add missing configuration symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-15 07:04:32 +00:00
Imre Kaloz cbd1b567a8 some additional config file cleanup..
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 13:32:34 +00:00
Imre Kaloz db8d9304dc unify congestion control options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 12:42:07 +00:00
Imre Kaloz 476b993379 make kernels use /etc/preinit by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-14 10:20:53 +00:00
Florian Fainelli 3da36e0eb2 [brcm63xx] also supports pcmcia
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-07 15:25:15 +00:00
Imre Kaloz 402c71c452 some more kernel config cleanup.. last for today :)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 20:57:02 +00:00
Imre Kaloz 68cfaed479 more cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 20:31:47 +00:00
Imre Kaloz 6172bcc2e3 cleanup MTD option handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 19:13:43 +00:00
Imre Kaloz 16600ec90d move MFD stuff to the generic kernel configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 13:51:29 +00:00
Imre Kaloz 13f29a0f22 refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-04 11:35:08 +00:00
Imre Kaloz 3f40c20af9 upgrade to newest stable kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-03 16:58:06 +00:00
Florian Fainelli 76377332a4 [brcm63xx] now that we register gpiodev, also include gpioctl in the default image
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 14:09:45 +00:00
Florian Fainelli ca100df2da [brmc63xx] register gpiodev
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 14:09:01 +00:00
Florian Fainelli b1b869ec99 [brcm63xx] fix redundant driver name printing in probe function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:32:54 +00:00
Florian Fainelli fb6c465ea7 [brcm63xx] make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:18:48 +00:00
Felix Fietkau 5bdd866100 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
Florian Fainelli 44b90dc6a2 [kernel] do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-12 12:54:38 +00:00
Florian Fainelli c1c91b95fc [brcm63xx] some more fixes to the SPI controller driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-08 08:52:57 +00:00
Florian Fainelli 7206f21b0a [brcm63x] imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-07 13:22:32 +00:00
Florian Fainelli 20c283eff0 [brcm63xx] override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:22:07 +00:00
Hauke Mehrtens 2094a9de3e [kernel] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:09:20 +00:00
Hauke Mehrtens a4260b52e9 [kernel] update to kernel version 2.6.27.21
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:05:51 +00:00
Florian Fainelli a35170087e [brcm63xx] enable all blocks on 6338 and uart clock on 6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-21 10:50:44 +00:00
Florian Fainelli 718972f840 [brcm63xx] add support for bcm6345 SoC, needs testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-20 15:08:02 +00:00
Florian Fainelli 1675d3bed9 [brcm63xx] fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 11:28:54 +00:00
Florian Fainelli 1a7f8acef6 [brcm63xx] add the CFE offset command line option to the imagetag utility, closes (#4366)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-16 12:29:11 +00:00
Florian Fainelli 4750ec9396 [brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 08:54:04 +00:00
Florian Fainelli 4b5f21833c [brcm63xx] do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-11 10:32:44 +00:00
Florian Fainelli 6ee24eaca7 [brcm63xx] make SPI work in full-duplex mode by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-10 15:28:29 +00:00
Florian Fainelli 83c9f9cae5 [brcm63xx] include kmod-switch in the default images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09 21:58:49 +00:00
Florian Fainelli ec86a16556 [brcm63xx] package the bcm63xx-spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 19:21:55 +00:00
Florian Fainelli cfd563d0c0 [brcm63xx] add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 15:27:46 +00:00
Florian Fainelli 59da47705d [brcm63xx] fix SPI accessors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 14:20:15 +00:00
Florian Fainelli 4d87772497 [brcm63xx] fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:43:13 +00:00
Florian Fainelli 2c319b5f1f [brcm63xx] compile and register SPI controller device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:18:26 +00:00
Florian Fainelli 9fb383ef35 [brcm63xx] make bcm6358 consistend with the other boards naming
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:17:19 +00:00
Florian Fainelli fc26c7a305 [brcm63xx] fix some SPI register definitions and platform-device registration code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-08 12:13:52 +00:00
Florian Fainelli 8aa93e0c26 [brcm63xx] prepare for SPI controller driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:15:00 +00:00
Florian Fainelli fa5dbdf2dc [brcm63xx] fix SPI register definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-06 01:13:10 +00:00
Florian Fainelli a7d3754b11 [brcm63xx] fix a bcm963xx-flash warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-02 18:55:47 +00:00
Florian Fainelli 757c9f0080 [brcm63xx] provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:48:23 +00:00
Florian Fainelli 9d8922c2f6 [brcm63xx] move the device registration to an earlier initcall level, required for fallback SPROM to work
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-27 15:18:34 +00:00
Felix Fietkau dbefaf4f75 disable all kernel config options that are set to =m
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 04:44:24 +00:00
Hauke Mehrtens 8acc4624ee [kernel] update to 2.6.28.7 and 2.6.27.19
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-21 18:53:05 +00:00
Gabor Juhos d0c16b318e [kernel] update to 2.6.27.17
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-15 07:47:12 +00:00
Florian Fainelli a6c4982789 [brcm63xx] always select kmod-ssb, pci is supported
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-13 00:13:39 +00:00
Florian Fainelli ca905ca3b2 [brcm63xx] do not overried 802.1q and PHY kernel configuration symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-10 17:53:52 +00:00
Gabor Juhos 3926620fcd [kernel] update to 2.6.27.15
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-08 12:32:39 +00:00
Florian Fainelli 17d6172311 [brcm63xx] resync kernel configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-03 19:59:01 +00:00
Florian Fainelli 2f386223ed [brcm63xx] add support for user9102 boards (#4537)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31 16:01:20 +00:00
Florian Fainelli a476b91064 [brcm63xx] generate images for old CFE based boards like the Davolink DV201
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 14:56:45 +00:00
Florian Fainelli 32c15d9663 [brcm63xx] Add board definitions for the Davolink DV201AMR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 14:54:13 +00:00
Gabor Juhos 61af435bbc [kernel] update to 2.6.27.13
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-25 18:33:19 +00:00