Commit Graph

31753 Commits (0cc57816cfce504c4509adcc2e8c8ea8a7f67a08)

Author SHA1 Message Date
John Crispin bb8e04d927 procd: r42814 added a bad git version
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:27:31 +00:00
John Crispin c1447f8ac4 at91: remove support for TQMa9263
This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:08:40 +00:00
John Crispin 1946621665 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:08:30 +00:00
John Crispin 990c69bdc3 lantiq - vgv7519: enable pci bus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:08:18 +00:00
John Crispin d8f979919a lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:08:11 +00:00
John Crispin 908a10d1da lantiq - vgv7519: fix open-drain configuration for stp
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:08:04 +00:00
John Crispin 626dbb940e lantiq - vgv7519: add pci-rst entry into dts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:07:56 +00:00
John Crispin bd72aeacf3 lantiq - vgv7519: remove exin definition copied from dev-board dts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:07:45 +00:00
John Crispin 6357636275 lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:07:30 +00:00
John Crispin 030dbd493a lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:07:19 +00:00
John Crispin 4366c9b6cd lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:07:04 +00:00
John Crispin c3a6e0a58f lantiq: fix some alt function on pinctrl-xway
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:06:51 +00:00
John Crispin 06435798dc procd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:06:41 +00:00
John Crispin c38a6c5213 ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:06:26 +00:00
John Crispin f91238dc22 fstools: update to latest git
adds support for /dev/vd* virtual io

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:06:15 +00:00
John Crispin 0ebb798819 octeon: add patches which are not upstreamed yet
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:06:06 +00:00
John Crispin 47a7f680d5 octeon: remove kmod-ath9k from default packages
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:05:52 +00:00
John Crispin f45d8eb921 octeon: prepare elf kernel image and md5sum for usb copying
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:05:39 +00:00
John Crispin 5dc87ed592 octeon: fix serial console for 3.14 kernel
Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:05:29 +00:00
John Crispin a7658d45cd ralink: various i2c fixes
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 20:05:13 +00:00
Rafał Miłecki e7106c5746 kernel: add some warnings to the old (built-in) rootfs splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 15:07:54 +00:00
Rafał Miłecki aa7c9cf299 kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 14:02:06 +00:00
Rafał Miłecki 2fe5eba1d8 kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
We want to remove that old (built-in) splitter at some point.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 13:49:11 +00:00
Steven Barth bb49239274 odhcp6c: add route-workaround for broken IPv6-ISPs
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.

We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.

This workaround can be turned off with: option fakeroutes 0

Signed-off-by: Steven Barth <steven@midlink.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 11:19:33 +00:00
Steven Barth 415543620a nftables: bump to 2014-09-30, disable gmp
Signed-off-by: Steven Barth <steven@midlink.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 06:24:53 +00:00
John Crispin fef66999f8 base-files: make postinst script run inside a subshell
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 05:55:35 +00:00
Steven Barth 6a1dd4f0e7 libnftnl: bump to 2014-10-02
Signed-off-by: Steven Barth <steven@midlink.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 05:30:36 +00:00
John Crispin acb9d6b4e4 lantiq: led name has changed from adsl -> dsl
make the notify script aware of this.

https://dev.openwrt.org/ticket/18005

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 05:18:52 +00:00
John Crispin 0496c6a597 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:53:34 +00:00
John Crispin ac7e01ea5e ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:53:25 +00:00
John Crispin 8ae697d7f2 ar71xx: simplify TP-LINK model detection
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:53:20 +00:00
John Crispin 230b7ba04a Fix build when TAR_OPTIONS env variable is set
The build system sets a make variable TAR_OPTIONS to the unpacking
command, i.e. "-xf -". Now if an environment variable with the same
name is set, the make variable is automatically exported to the
environment. The make variable is added to the tar command in the
makefile, and tar adds the environment variable. This results in a
command like "tar -c /some/dir -xf - -xf -" which of course doesn't
work. It is also difficult to spot as the second "-xf -" is not
visible on the command line.
I suggest this is fixed by unexporting TAR_OPTIONS as I see no use
of the evironment variable, and it is changed from the original
value anyway.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:53:14 +00:00
John Crispin 2e9a3b28f2 iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:53:04 +00:00
John Crispin f44a320095 ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
Signed-off-by: Jaehoon You <teslamint@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:57 +00:00
John Crispin 09039308fa kernel: add rtc-ds1307 module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:51 +00:00
John Crispin 6e8e2303cb kernel: add ledtrig-transient module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:44 +00:00
John Crispin 23246db9e0 ramips: D-Link DIR-810L: make led naming consistent with other boards
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:36 +00:00
John Crispin 16c7f3c21e ralink: Add missing code to free GPIO on Ralink SoC
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:26 +00:00
John Crispin 3bf58c8249 hostapd: read missing parameter for dynamic VLANs
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:21 +00:00
John Crispin 1e7c3ba398 ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:13 +00:00
John Crispin 5f9a01b40f ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:07 +00:00
John Crispin 9584e3b28b firmware-utils: add NEXX factory image support
This patch adds support to encode and decode images for certain types of
NEXX routers.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:52:01 +00:00
John Crispin 37a33d7e8d sysupgrade: preserve symlinks in backups
Signed-off-by: Catalin Patulea <catalinp@google.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:51:56 +00:00
John Crispin 5416fbe6e0 ar71xx: fix reset button gpio for OM2P/OM2P-HS
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".

Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42782 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-06 04:51:51 +00:00
Felix Fietkau f53447947d build: remove useless quote stripping for KERNELNAME, add fallback for it in the kernel build command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 20:17:23 +00:00
Felix Fietkau 0a602b2b72 targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 20:17:19 +00:00
Felix Fietkau 40935a16aa lantiq: remove the useless ltqtapi.mk include file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 18:58:47 +00:00
Felix Fietkau a6ea8af642 gcc: remove version 4.8.0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 18:40:43 +00:00
Felix Fietkau 961d49f15b binutils: remove old versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42776 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 18:40:38 +00:00
Zoltan HERPAI 9c2be8be39 sunxi: re-add rootfs build when no profile is set, fixes #17980, thanks.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-05 17:32:36 +00:00