Florian Fainelli
435e5016da
[package] switch to newer CS5535 GPIO driver, patch from Philip Prindeville
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 19:59:29 +00:00
Florian Fainelli
d4ce1edb5a
[kernel] add two solos-releated patches from Philip Prindeville
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 19:59:25 +00:00
Florian Fainelli
bca0340476
[kernel] update to 2.6.32.29
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 12:44:23 +00:00
Jo-Philipp Wich
2b22e20663
[x86] geos: preconfig fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-30 21:07:39 +00:00
Felix Fietkau
3ec2817f23
x86/soekris: Add defconfig for soekris net4801 and net4826
...
Add default config file for net4801 and 4826 and initial script
to copy config file like it is done for other platforms.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 11:33:46 +00:00
Felix Fietkau
19622693b3
x86/soekris: Add script to detect soekris model
...
Add script to detect soekris board of net4801 and net4826.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 11:33:42 +00:00
Imre Kaloz
d12aecc922
platform specific patches don't belong here - take #2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-24 12:11:25 +00:00
John Crispin
953ddaaba7
[geos]
...
* Make sure that Geos baud-rate defaults correctly
Changeset 23414 somehow got reordered. The unconditional default trumps later settings.
contributed by Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-22 23:10:51 +00:00
John Crispin
c6adb53d79
[geos]
...
* adds sane default uci environment
* adds sane default package selection
contributed by Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-22 22:43:51 +00:00
Daniel Dickinson
0673e61005
[x86]: Missing symbols for CONFIG_xxx ..
...
Thanks Philip Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-17 05:49:02 +00:00
Hauke Mehrtens
738117eb86
kernel: update kernel versions
...
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-11 16:07:21 +00:00
Imre Kaloz
1ae1fb6b50
update to the latest stable kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 18:50:11 +00:00
Imre Kaloz
b62a003604
[target/x86]: move x86 back to .32 for now
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:58:31 +00:00
Imre Kaloz
c1725149e1
switch from ext2 to ext4 (w/o) journaling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:12:39 +00:00
Imre Kaloz
a75d08e09d
[target/x86]: additional Kconfig options for newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:34:45 +00:00
Imre Kaloz
a25f521af8
[target/x86]: we don't need microcode updates
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:33:25 +00:00
Felix Fietkau
d35807315d
x86: add missing l1 cache shift change
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 23:27:25 +00:00
Felix Fietkau
23aa86b653
x86: turn off CONFIG_X86_GENERIC for geos and net5501
...
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 22:56:33 +00:00
Felix Fietkau
a1d04e3c69
x86: refresh config, enable pci express support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-17 22:41:17 +00:00
Imre Kaloz
ade2af865c
[x86:rdc]: x86 kernels target bzImage by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-08 09:44:33 +00:00
Florian Fainelli
bd42bca2ae
[x86 net5501: make kmod-leds-net5501 work
...
Fixes dependencies, and properly labels the module as GPL (thanks, Felix!).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-08 07:31:40 +00:00
Florian Fainelli
a4e62a74a7
[buildroot] make targets provide their KERNELNAME
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-08 07:31:25 +00:00
Florian Fainelli
96647364b9
[x86] net5501: Add features to net5501 and remove HID support (unneeded)
...
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
all console access will be over a serial port.
Also add FEATURES to it as well.
Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-07 20:37:40 +00:00
Imre Kaloz
a497060e39
update kernels to 2.6.32.25 and 2.6.35.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 09:01:08 +00:00
Florian Fainelli
03d312bbb3
[package] add kmod-leds-net5501
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-30 22:35:59 +00:00
Florian Fainelli
6ffd3bd02c
[x86] resync config-default, enable gpio support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-30 22:35:50 +00:00
Florian Fainelli
313b48a4ec
[x86] add required symbols to allow building of 2.6.35.7
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-23 18:56:19 +00:00
Florian Fainelli
4179897a6d
[x86] Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms
...
Makes the builds run slightly faster on multicores.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 12:42:06 +00:00
Alexandros C. Couloumbis
5fe6b2b482
target/linux: fix Geos baudrate. (thank you Philip Prindeville)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-12 15:27:34 +00:00
Jo-Philipp Wich
e9b7a65dec
[Patch v2] Geos -- new x86 subtarget definition
...
This defines the Geos platform from Traverse Technologies in AUS.
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.
I'll add support for the LEDs separately.
Signed-off-by: Philip A. Prindeville
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-10 22:48:33 +00:00
Imre Kaloz
4bf29e323c
[kernel]: upgrade kernel versions to the latest stable ones
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04 10:40:41 +00:00
Felix Fietkau
2a1ba1dec5
x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-20 22:14:07 +00:00
Jo-Philipp Wich
611be597d9
[x86] add kvm_guest to subtarget list
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-13 17:00:37 +00:00
Jo-Philipp Wich
b9be9c0ce2
[x86] adjust image defaults for KVM
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-06 02:31:37 +00:00
Jo-Philipp Wich
46870ff9e2
[PATCH v5 3/4] x86: add kvm_guest subtarget
...
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22944 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-05 23:18:51 +00:00
Florian Fainelli
53fe275b46
[kernel] update to 2.6.32.20
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-22 17:07:37 +00:00
Andy Boyett
1ab07cd99b
[x86] image: use internal qemu-img for vmdk and vdi images
...
drop host dependencies on qemu-utils and VirtualBox
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-09 04:22:39 +00:00
Jo-Philipp Wich
f4aceedc24
[kernel] add missing symbols for 2.6.35
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06 01:33:23 +00:00
Imre Kaloz
0b47979d12
update kernel versions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-19 11:34:03 +00:00
Felix Fietkau
12abbd4d08
x86: build fully functional images on Mac OS X, now that grub is fixed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:48:21 +00:00
Nicolas Thill
de002a7d39
update linux kernel to 2.6.32.14
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-27 18:09:09 +00:00
Nicolas Thill
6598259ef5
target/linux: refresh 2.6.32 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-24 20:35:46 +00:00
Hauke Mehrtens
0710ef015d
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-23 13:16:51 +00:00
Nicolas Thill
c0eb3b3611
image/x86: fix typo when building on Mac OS X ( closes : #7303 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-08 12:46:25 +00:00
Nicolas Thill
d6cfedc7ca
target/x86: cleanup image config options
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-05 02:11:15 +00:00
Nicolas Thill
711491bad1
target/x86: use common config items for options shared between generic and olpc targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-05 02:07:38 +00:00
Nicolas Thill
560f2614b5
images: rename CONFIG_TARGET_ROOTFS_FSPART to CONFIG_TARGET_ROOTFS_PARTSIZE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-05 01:52:54 +00:00
Nicolas Thill
443cf0e427
package/grub: build a host grub and a target grub ( #7269 )
...
- use the host grub binary for grub install, but with target stage files
- disable SSP (-fno-stack-protector) & Compile Time Buffer Checks (-U_FORTIFY_SOURCE) if appropriate
- create a target grub package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-02 17:32:25 +00:00
Nicolas Thill
8aea0611d9
target/x86: add to changes missed from [21246] preventing .vdi & .vmdk image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-30 18:43:39 +00:00
Nicolas Thill
ac838e71ff
target/x86: various image changes
...
* add a -combined suffix for grub+kernel+rootfs images and -rootfs for root filesystem only images
* change ext from .image to .img
* fix perms on VirtualBox .vdi image
* gzip ext2 rootfs image as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-29 03:03:47 +00:00