623e6025a8
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:47 +00:00
02f1075b0a
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:43 +00:00
276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
d5e9696c49
adm5120: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:26 +00:00
75d0271704
[adm5120] do no longer rename amba-pl010 serial devices names
...
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-03 16:18:40 +00:00
d75509fe4d
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-10 12:16:41 +00:00
ca5eb9dd8f
add timeserver config to target specific system configs as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-04 12:53:35 +00:00
f5e644ebab
sysupgrade works on the wp54
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-21 16:52:14 +00:00
bcc1c50eb9
[adm5120] add default network/leds config ( #6759 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 21:49:42 +00:00
734780f950
[adm5120] add support for generic eb214a, thanks cezary ( #7027 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-18 10:29:58 +00:00
f165cba5c1
adm5120: Added preinit script to set vars based on cpuinfo during preinit main; This fixes a bug in which the per-board vars were not set due to cpuinfo not being mounted when the adm5120.sh was run
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21633 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 03:20:38 +00:00
f3d7a5138d
adm5120: Fixed name of preinit_iface scriptlet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-30 03:20:27 +00:00
aaddec14d1
preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28 19:28:02 +00:00
fd4ddfd240
add preinit modularization work by Daniel Dickinson (cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
56b43ecd25
adm5120: improve sysupgrade support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-03 12:14:17 +00:00
e811173345
adm5120: fix board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-03 12:14:14 +00:00
eeb604beb9
adm5120: add kmod-leds-gpio and kmod-ledtrig-adm5120-switch to the default packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02 15:07:39 +00:00
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
50f58f29b8
sysupgrade for adm5120
...
Sysupgrade adapted from the bcm47xx one.
Add a hook to disable watchdog before upgrading.
Signed-off-by: Frédéric Moulins <ffrrrr@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-25 11:29:04 +00:00
672d15d39e
[adm5120] add initial failsafe support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08 06:38:26 +00:00
9233c3cdb9
get rid of per-profile base-files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-29 14:27:54 +00:00
66cf26e641
[adm5120] add initial diagnostic support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-27 15:02:19 +00:00
6bcd07afdd
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
92558d67a4
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
John Crispin
Steven Barth
Gabor Juhos
Florian Fainelli
Jo-Philipp Wich
Travis Kemen
Daniel Dickinson
Felix Fietkau