ad1f4fa94d
[PATCH] add input subsystem to hotplug rules
...
This patch adds the input subsystem to the hotplug rules, making it possible to
react on the addition of input devices (e.g. USB numpads).
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-14 22:00:10 +00:00
a4a8c8116f
[package] hotplug2 depends on udevtrigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-26 21:29:06 +00:00
1619fc6917
[package] hotplug2: mark /etc/hotplug2.rules as conffile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05 17:16:12 +00:00
63d74b179a
[package] hotplug2: bump pkg release after hotplug fixes in r20679-r20685
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-10 19:33:56 +00:00
97f8380385
[package] hotplug2: Refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:29:37 +00:00
d03a4c5d8c
[package] hotplug2: Fix event blocking when there are no available children ( #6958 , #7030 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:29:32 +00:00
b6a5e28a76
[package] hotplug2: Always fork rules flagged as slow
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:15:42 +00:00
5b5b531c57
[package] hotplug2: Fix forking ( #7033 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:09:14 +00:00
77a1b5673c
[package] hotplug2: Cancel firmware loading on file openning errors
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:09:09 +00:00
4b03e12f5c
[package] hotplug2: Fix sysfs path ( #7031 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 18:09:04 +00:00
6189513013
package/hotplug2: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 14:28:25 +00:00
2ee3482123
Fix a memory leak in hotplug2 environment handling.
...
Bump hotplug2 to the latest svn revision, remove obsolete patches.
Memory leak is caused by the way hotplug2 handles environment variables,
using setenv() and unsetenv(). setenv() creates copies of the supplied
strings, but, due to a POSIX blunder, these copies are never destroyed
by unsetenv(), neither in glibc nor uclibc - not until the program
terminates.
Since some events are handled directly in the main process, even when
configured with the "fork" worker, hotplug2 memory usage will keep
growing over time. This can be observed by running "udevtrigger" and
noting the increase in hotplug2 VmRSS after each run.
This patch uses putenv() instead, which leaves storage management to
the caller, so that we can explicitly delete stuff when it's no longer
needed.
Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09 18:50:49 +00:00
3c635449d3
hotplug2: get rid of the unnecessary reference to libdl as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-20 20:59:40 +00:00
7a230fb6be
hotplug2: compile in the worker module statically, saves >20k uncompressed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-20 20:49:44 +00:00
15551bacbf
hotplug2: fix "MALLOC FAILURE!" message caused by a missing return code check on recv()
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-19 02:39:02 +00:00
803c46476c
[package] update hotplug2 to r199, fixes build failures on brcm-2.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-03 18:33:52 +00:00
1777ea4ac0
[package] hotplug2 may need -fPIC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-29 23:11:29 +00:00
c8804f6367
[hotplug2] added back atm rule
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28 13:31:30 +00:00
0cbd8a942f
[hotplug2] add hotplug2 v1.0
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28 13:21:58 +00:00
6bb5dc043e
[hotplug2] Move hotplug2 v0.9 to hotplug2-old
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-28 13:20:54 +00:00
580f0a8d67
[package] allow hotplug events to be triggered with the atm subsystem ( #2996 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-26 09:30:45 +00:00
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
c47c1e353e
Use block events for the mounting/unmounting of external storage devices.
...
This handles both USB and IEEE1394 devices. It removes /sbin/usb-storage in
favor of using the block hotplug event. There are dummy scripts to handle the
plug in/out of USB and IEEE1394 devices for updating LEDs. Storage devices
are mount as a sub-directory under /mnt.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-30 20:48:42 +00:00
25a9217e02
[package] hotplug2: add platform hotplugging
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-28 20:01:11 +00:00
8929c4a880
remove warning from hotplug2, which pops up 10 times during boot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-04 08:04:16 +00:00
13ab5b86e6
fix hotplug2 event processing deadlock
...
when bringing up ethernet on ixp4xx, the driver may request
a firmware while hotplug2 waits for the netdev bringup to complete.
change the event processing loop to keep an event backlog to allow
unthrottled events to pass through while throttled events are being waited for
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-30 19:02:01 +00:00
1bc0fad874
move hotplug2 & udevtrigger to base section
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-21 22:31:07 +00:00
8422957bae
refactor hotplug2 rules, make sure that the default button rule is only used during the init (should fix #2772 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-01 17:08:04 +00:00
6ad5c919ce
bump package versions after updates
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 20:41:57 +00:00
2180fa92a1
move package description to a separate definition, remove it when DESCRIPTION=TITLE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 08:34:51 +00:00
d4f61b29bc
reduce watchdog trigger from 10 to 5 seconds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-01 21:01:09 +00:00
e1ec900c8e
add watchdog start patch from #1967
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-23 02:51:42 +00:00
86b2e4df0e
fix two small bugs in the hotplug2 rule parser ( #2085 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-18 07:23:40 +00:00
07db8f80f9
move firmware loading to hotplug2-init.rules (should fix #2056 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-13 02:32:32 +00:00
a7e1a7ae99
hotplug2 update - include hotplug2-init.rules from hotplug2.rules, fix permissions of various devices ( fixes #2052 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-09 00:13:47 +00:00
b1840ac964
replace the hotplug2 fork handling hack with a better solution implemented in upstream (thanks, iSteve)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-30 11:05:14 +00:00
c16aa532fe
hotplug2: add fork handling optimization (also fixes that pesky pppoe race condition in #1655 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 09:47:58 +00:00
923e4ce031
update to hotplug2 svn version (recommended by iSteve)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 09:46:37 +00:00
c209060116
fix failsafe on broadcom, send netlink events in diag when running linux 2.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 08:32:25 +00:00
21e832921c
hotplug2: add a missing cflag, allow hotplug events that are not 'add'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 07:08:35 +00:00
f0f5892884
make hotplug2 use the build system cflags
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 06:30:36 +00:00
a989402037
added usb-storage hotpluging
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-20 22:05:15 +00:00
12a81e859f
refresh all package patches in the buildroot using quilt
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-04 11:25:53 +00:00
8d2dd06e4c
Fix alsa-lib on 2.6 kernels, add an hotplug rule to populate /dev with the sound peripherals ( #1677 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-15 08:20:31 +00:00
629985c5aa
fix firmware loading
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-06 16:03:38 +00:00
4e4050b160
use hotplug2 for serializing hotplug events on 2.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-05 18:33:18 +00:00
713863458d
add file type autodetection for the unpack command and nuke PKG_CAT:= in lots of places
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-16 20:21:39 +00:00
c70cfb3d1a
add a default for PKG_BUILD_DIR and PKG_INSTALL_DIR (will use KERNEL_BUILD_DIR if kernel.mk is included, BUILD_DIR otherwise)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-16 19:18:55 +00:00
7c5ca4e5de
make hotplug2 depend on udevtrigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-04 20:15:32 +00:00
91a5b05b8c
add hotplug2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-04 19:55:47 +00:00
Jo-Philipp Wich
Florian Fainelli
Vasilis Tsiligiannis
Gabor Juhos
Felix Fietkau
Hamish Guthrie
Jose Vasconcellos
John Crispin
Nicolas Thill