Felix Fietkau
d5f92195e6
comgt: remove old network scripts
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 12:59:11 +00:00
Felix Fietkau
94b38ec0fd
enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 23:33:35 +00:00
John Crispin
3ae3351ffd
comgt: Add scripts to comgt to retrieve the IMSI and CNUM to identify the SIM card.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-30 14:16:44 +00:00
Felix Fietkau
a1c6024381
comgt: add missing file ( fixes #10301 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-28 11:30:21 +00:00
Felix Fietkau
a4d6c9c077
comgt: fix pin code config option
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 20:29:14 +00:00
Felix Fietkau
f964407745
comgt: delay 3g bringup for sierra wireless cards until the card has locked on to the carrier, this helps with avoiding firmware hangs (thx, chris)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 20:29:10 +00:00
Felix Fietkau
d624e7ea5d
comgt: port 3g.sh to netifd
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 20:29:00 +00:00
Felix Fietkau
24aa501714
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 08:47:19 +00:00
Jo-Philipp Wich
d417801714
[package] comgt: add tty hotplug remove handling, only iterate each tty once ( #9211 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-04 08:19:07 +00:00
Jo-Philipp Wich
b1d9016ac7
[package] comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03 19:45:55 +00:00
Jo-Philipp Wich
4d8958b11d
[package] comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug ( #9211 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-03 19:39:13 +00:00
Jo-Philipp Wich
15c3dfda84
[package] comgt: handle ttyHS* devices in usb hotplug, fix typo ( #9046 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15 09:09:05 +00:00
Florian Fainelli
de5b1d7d6a
[package] comgt: add ACM hotplug
...
This adds in support for ttyACM devices in the 3g hotplug script.
Signed-off-by: Matthew Eaton <wrt at divinehawk.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25621 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 17:24:25 +00:00
Nicolas Thill
8ddd70bcff
package/comgt: only set pincode if it's supplied ( closes : #7334 ), bump release number
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-09 16:55:56 +00:00
Markus Wigge
d4e110704c
LED handling fixes for WRT54-G3Gv2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-02 10:32:39 +00:00
Jo-Philipp Wich
a5dd7363e3
[package] comgt: add usb hotplug handler to bring up 3g ifaces on boot or when the dongle is attached
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-04 18:11:34 +00:00
Jo-Philipp Wich
e49c6bc4d7
[package] comgt: remove obsolete iptables support code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-26 20:14:42 +00:00
Jo-Philipp Wich
29da0b6c6c
[package] comgt:
...
- localize variables
- bring scripts in sync with updated ppp logic
- bump package revision
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-01 18:01:36 +00:00
Jo-Philipp Wich
f799ec128c
[package] cleanup Makefiles ( #7212 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-23 11:27:29 +00:00
Gabor Juhos
436c00dd9e
package/comgt: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 14:27:58 +00:00
Felix Fietkau
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
Andy Boyett
0865b3bfcc
change LEDs on wrt54g3g only
...
/proc/diag is not available on x86, so check for existance to avoid
errors... Thanks Markus Wigge
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-15 18:02:08 +00:00
Travis Kemen
3b0936087a
This series of patches closes the support gap on one of the explicitly
...
supported platforms (WRT54G3G) by adding direct support for the Sierra
Wireless 3G modems.
Signed-off-by: RB <aoz.syn@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 20:36:16 +00:00
Felix Fietkau
85ae437eae
fix the 3g interface configuration
...
The first problem is the "chat" command which misses "-E", so the
environment variable addressed inside the script is never used and
the script breaks.
The second problem is the that you cannot assume an Option card when
you did "not discover a Novatel".
In my case the script tried to set the mode with the Option
AT-command which failed on the Huawei stick.
Unfortunaltely I don't have a correct command for that device, so I
just want to start the connection without any mode set before thus using
the defaults.
Signed-off-by: Markus Wigge <mwigge@marcant.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-09 15:35:34 +00:00
Florian Fainelli
f6759a2625
Allow more ttyUSB<N> devices to use the 3g script ( #3098 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-05 15:43:33 +00:00
Felix Fietkau
2a189e94a6
Add CDMA/EVDO support to comgt package
...
This patch adds a chat script and makes some modifications to
/lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in
addition to the existing GPRS/UMTS support. Modifications to 3g.sh
are:
- Added 'chat' variable to point at the appropriate script
- Added 'evdo' and 'cdma' as acceptable 'service' values, and skip
the whole gcom initialization bit
- Changed pppd connection speed from 460800 to more widely supported
115200; in my experience, this is not your actual connection speed,
but at what speed pppd sends setup commands to the interface.
This kinda eliminates the need for /etc/ppp/3g.connect - I think I've
replaced that functionality, but in a slightly more standardized
method, using the 'connect' variable understood by PPP.
Signed-off-by: RB<aoz.syn@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02 01:21:31 +00:00
Florian Fainelli
c640a3ab2d
Allow /dev/ttyUSB2 as wan device for 3g ( #2269 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 18:41:49 +00:00
Nicolas Thill
2180fa92a1
move package description to a separate definition, remove it when DESCRIPTION=TITLE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 08:34:51 +00:00
Felix Fietkau
12a81e859f
refresh all package patches in the buildroot using quilt
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-04 11:25:53 +00:00
Felix Fietkau
713863458d
add file type autodetection for the unpack command and nuke PKG_CAT:= in lots of places
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-16 20:21:39 +00:00
Felix Fietkau
ae39d6a370
nuke mdev and replace it with hotplug2 :)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-04 20:31:53 +00:00
Florian Fainelli
bbb3cb3a3c
Upgrade comgt to 0.32 ( #1347 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-02-19 11:17:13 +00:00
Felix Fietkau
5a32593057
replace lots of manual install commands with INSTALL_* variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 00:29:07 +00:00
Felix Fietkau
1388b6313a
comgt: make firewalling changes when umts goes up or down
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-09 05:40:27 +00:00
Felix Fietkau
f3d45e2f17
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 00:21:54 +00:00