420a1bc0f7
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:49 +00:00
8ac8cc88eb
ramips: consistently use 'firmware' name for sysupgrade partitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:48 +00:00
356abe23cf
ramips: fix a section mismatch warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:46 +00:00
e324614143
ramips: remove unused include from the common GPIO code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:44 +00:00
0e8f2c6cc6
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:41 +00:00
46cc717148
ramips: set cp0_perfcount_irq for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:40 +00:00
ed7f15e6cf
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-04 08:43:07 +00:00
729eb335e4
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:20:03 +00:00
8eb654c4ef
ramips: define GPIO chips separately for each SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:59 +00:00
2e1b24966f
ramips: move GPIO definitions into a separate header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:57 +00:00
878f3adcc0
ramips: setup GPIO chip functions on the fly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:51 +00:00
c31af34adb
ramips: use separate register base for GPIO chips
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:48 +00:00
2775635f6a
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:45 +00:00
337e5d8f01
ramips: enable MDIO on the HW550-3G board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:41 +00:00
3dbd1d3156
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:40 +00:00
f564424e07
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 16:34:52 +00:00
9ad6aac6db
ramips: register watchdog device on the rt288x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:52 +00:00
7c1dfa1706
ramips: add watchdog device for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:50 +00:00
777c494bef
ramips: register watchdog device on the rt305x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:47 +00:00
51c418f726
ramips: add watchdog device for RT305x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:46 +00:00
f141ac688e
ramips: add watchdog driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:41 +00:00
044ba6d28f
ramips: implement clock API for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:39 +00:00
0bd787a602
ramips: implement clock API for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:35 +00:00
baa05587d0
ramips: remove extern and __init from function prototypes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:33 +00:00
f8f6fc147b
ramips: ramips_esw: fix typos
...
Patch from #8577 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-04 13:44:05 +00:00
91714565c1
ramips: handle OTG interrupt on the RT305x SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:25 +00:00
ecee65d7f6
ramips: ramips_esw: add more definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:33 +00:00
c1bae026dc
ramips: ramips_esw: add helper function to set pvid
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:28 +00:00
dc512ca5aa
ramips: ramips_esw: add helper function to set vlan members
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:25 +00:00
858c6453a0
ramips: ramips_esw: add helper function to set VLAN id
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:22 +00:00
34c6ad037a
ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:16 +00:00
344bbc134e
ramips: ramips_esw: use rt305x_esw prefix in function names
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:14 +00:00
476af593dd
ramips: ramips_esw: coding style cleanup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:12 +00:00
420f65d3d6
ramips: ramips_esw: add defines for switch register offsets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:07 +00:00
5647401655
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:04 +00:00
418e052c05
ramips: ramips_esw: convert it to be a platform driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:00 +00:00
a0e968135a
ramips: ramips_esw: move hardware initialization into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:14:58 +00:00
cf67d0b29a
ramips: ramips_esw: use a private structure for the functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:14:54 +00:00
582dad46c0
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05 20:14:30 +00:00
231f17d61e
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:23 +00:00
404b68fcd2
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:18 +00:00
00bd3f47c4
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:16 +00:00
77a769e423
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:12 +00:00
be87c0dac9
ramips: Remove unnecessary skb_put
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:08 +00:00
e3647801e9
ramips: Allow ethernet interface to be taken down and up again
...
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05 14:10:34 +00:00
966de4fbd4
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
d572e1483f
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
62d8c17df5
ramips: register ethernet device on the RT-N15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:46 +00:00
5c7c1c3dba
ramips: add generic ethernet device for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:43 +00:00
69e79c381f
ramips: add mdio_cfg configuration for the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:40 +00:00
Gabor Juhos