ar71xx: ar913x_wmac device support into a separate file

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18820 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/config-2.6.30

@@ -4,6 +4,7 @@ CONFIG_AG71XX=y
 CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
 CONFIG_AR71XX_DEV_AP94_PCI=y
+CONFIG_AR71XX_DEV_AR913X_WMAC=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y

target/linux/ar71xx/config-2.6.31

@@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
 CONFIG_AR71XX_DEV_AP94_PCI=y
+CONFIG_AR71XX_DEV_AR913X_WMAC=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y

target/linux/ar71xx/config-2.6.32

@@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
 CONFIG_AR71XX_DEV_AP94_PCI=y
+CONFIG_AR71XX_DEV_AR913X_WMAC=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -5,15 +5,18 @@ menu "Atheros AR71xx machine selection"
 config AR71XX_MACH_AP81
 	bool "Atheros AP81 board support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_AP83
 	bool "Atheros AP83 board support"
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_DIR_615_C1
 	bool "D-Link DIR-615 rev. C1 support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_DIR_825_B1
@@ -49,6 +52,7 @@ config AR71XX_MACH_WP543
 config AR71XX_MACH_WRT160NL
 	bool "Linksys WRT160NL board support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_WRT400N
@@ -69,16 +73,19 @@ config AR71XX_MACH_WNDR3700
 config AR71XX_MACH_WNR2000
 	bool "NETGEAR WNR2000 board support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_MZK_W04NU
 	bool "Planex MZK-W04NU board support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_MZK_W300NH
 	bool "Planex MZK-W300NH board support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_TL_WR741ND
@@ -89,16 +96,19 @@ config AR71XX_MACH_TL_WR741ND
 config AR71XX_MACH_TL_WR941ND
 	bool "TP-LINK TL-WR941ND support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_TL_WR1043ND
 	bool "TP-LINK TL-WR1043ND support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_TEW_632BRP
 	bool "TRENDnet TEW-632BRP support"
 	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
 	default y
 
 config AR71XX_MACH_UBNT
@@ -114,4 +124,7 @@ config AR71XX_DEV_M25P80
 config AR71XX_DEV_AP94_PCI
 	def_bool n
 
+config AR71XX_DEV_AR913X_WMAC
+	def_bool n
+
 endif

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 obj-$(CONFIG_PCI)			+= pci.o
 
 obj-$(CONFIG_AR71XX_DEV_AP94_PCI)	+= dev-ap94-pci.o
+obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)	+= dev-ar913x-wmac.o
 obj-$(CONFIG_AR71XX_DEV_M25P80)		+= dev-m25p80.o
 
 obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar913x-wmac.c

@@ -0,0 +1,63 @@
+/*
+ *  Atheros AR913x SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "dev-ar913x-wmac.h"
+
+static struct resource ar913x_wmac_resources[] = {
+	{
+		.start	= AR91XX_WMAC_BASE,
+		.end	= AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= AR71XX_CPU_IRQ_WMAC,
+		.end	= AR71XX_CPU_IRQ_WMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ath9k_platform_data ar913x_wmac_data;
+
+static struct platform_device ar913x_wmac_device = {
+	.name		= "ath9k",
+	.id		= -1,
+	.resource	= ar913x_wmac_resources,
+	.num_resources	= ARRAY_SIZE(ar913x_wmac_resources),
+	.dev = {
+		.platform_data = &ar913x_wmac_data,
+	},
+};
+
+void __init ar913x_add_device_wmac(void)
+{
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	memcpy(ar913x_wmac_data.eeprom_data, ee,
+	       sizeof(ar913x_wmac_data.eeprom_data));
+
+	ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	platform_device_register(&ar913x_wmac_device);
+}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar913x-wmac.h

@@ -0,0 +1,19 @@
+/*
+ *  Atheros AR913x SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AR913X_WMAC_H
+#define _AR71XX_DEV_AR913X_WMAC_H
+
+void ar913x_add_device_wmac(void) __init;
+
+#endif /* _AR71XX_DEV_AR913X_WMAC_H */

target/linux/ar71xx/files/arch/mips/ar71xx/devices.c

@@ -18,7 +18,6 @@
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
-#include <linux/ath9k_platform.h>
 
 #include <asm/mach-ar71xx/ar71xx.h>
 
@@ -777,46 +776,6 @@ void __init ar71xx_parse_mac_addr(char *mac_str)
 				"\"%s\"\n", mac_str);
 }
 
-static struct resource ar91xx_wmac_resources[] = {
-	{
-		.start	= AR91XX_WMAC_BASE,
-		.end	= AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= AR71XX_CPU_IRQ_WMAC,
-		.end	= AR71XX_CPU_IRQ_WMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ath9k_platform_data ar91xx_wmac_data;
-
-static struct platform_device ar91xx_wmac_device = {
-	.name		= "ath9k",
-	.id		= -1,
-	.resource	= ar91xx_wmac_resources,
-	.num_resources	= ARRAY_SIZE(ar91xx_wmac_resources),
-	.dev = {
-		.platform_data = &ar91xx_wmac_data,
-	},
-};
-
-void __init ar91xx_add_device_wmac(void)
-{
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	memcpy(ar91xx_wmac_data.eeprom_data, ee,
-	       sizeof(ar91xx_wmac_data.eeprom_data));
-
-	ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
-	mdelay(10);
-
-	ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
-	mdelay(10);
-
-	platform_device_register(&ar91xx_wmac_device);
-}
-
 static struct platform_device ar71xx_dsa_switch_device = {
 	.name		= "dsa",
 	.id		= 0,

target/linux/ar71xx/files/arch/mips/ar71xx/devices.h

@@ -54,8 +54,6 @@ void ar71xx_add_device_uart(void) __init;
 
 void ar71xx_add_device_wdt(void) __init;
 
-void ar91xx_add_device_wmac(void) __init;
-
 void ar71xx_add_device_dsa(unsigned int id,
 			   struct dsa_platform_data *d) __init;
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c

@@ -19,6 +19,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define AP81_GPIO_LED_STATUS	1
 #define AP81_GPIO_LED_AOSS	3
@@ -133,7 +134,7 @@ static void __init ap81_setup(void)
 					ARRAY_SIZE(ap81_gpio_buttons),
 					ap81_gpio_buttons);
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c

@@ -23,6 +23,7 @@
 #include <asm/mach-ar71xx/ar91xx_flash.h>
 
 #include "devices.h"
+#include "dev-ar913x-wmac.h"
 
 #define AP83_GPIO_LED_WLAN	6
 #define AP83_GPIO_LED_POWER	14
@@ -217,7 +218,7 @@ static void __init ap83_generic_setup(void)
 
 	ar71xx_add_device_usb();
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 
 	platform_device_register(&ap83_flash_device);
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c

@@ -20,6 +20,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define DIR_615C1_GPIO_LED_ORANGE_STATUS 1	/* ORANGE:STATUS:TRICOLOR */
 #define DIR_615C1_GPIO_LED_BLUE_WPS	3	/* BLUE:WPS */
@@ -148,7 +149,7 @@ static void __init dir_615c1_setup(void)
 					ARRAY_SIZE(dir_615c1_gpio_buttons),
 					dir_615c1_gpio_buttons);
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "D-Link DIR-615 rev. C1", dir_615c1_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c

@@ -20,6 +20,7 @@
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-ar913x-wmac.h"
 
 #define MZK_W04NU_GPIO_LED_USB		0
 #define MZK_W04NU_GPIO_LED_STATUS	1
@@ -167,7 +168,7 @@ static void __init mzk_w04nu_setup(void)
 					mzk_w04nu_gpio_buttons);
 	ar71xx_add_device_usb();
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "Planex MZK-W04NU", mzk_w04nu_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c

@@ -20,6 +20,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define MZK_W300NH_GPIO_LED_STATUS	1
 #define MZK_W300NH_GPIO_LED_WPS		3
@@ -153,7 +154,7 @@ static void __init mzk_w300nh_setup(void)
 	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
 				       ARRAY_SIZE(mzk_w300nh_gpio_buttons),
 				       mzk_w300nh_gpio_buttons);
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "Planex MZK-W300NH", mzk_w300nh_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c

@@ -19,6 +19,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define TEW_632BRP_GPIO_LED_STATUS	1
 #define TEW_632BRP_GPIO_LED_WPS		3
@@ -123,7 +124,7 @@ static void __init tew_632brp_setup(void)
 					ARRAY_SIZE(tew_632brp_gpio_buttons),
 					tew_632brp_gpio_buttons);
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TRENDnet TEW-632BRP", tew_632brp_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c

@@ -19,6 +19,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define TL_WR1043ND_GPIO_LED_SYSTEM     2
 #define TL_WR1043ND_GPIO_LED_QSS        5
@@ -118,7 +119,7 @@ static void __init tl_wr1043nd_setup(void)
 	ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
 					tl_wr1043nd_gpio_buttons);
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c

@@ -19,6 +19,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define TL_WR941ND_GPIO_LED_SYSTEM	2
 #define TL_WR941ND_GPIO_LED_QSS		5
@@ -131,7 +132,7 @@ static void __init tl_wr941nd_setup(void)
 	ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(tl_wr941nd_gpio_buttons),
 					tl_wr941nd_gpio_buttons);
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TP-LINK TL-WR941ND", tl_wr941nd_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c

@@ -21,6 +21,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define WNR2000_GPIO_LED_PWR_GREEN	14
 #define WNR2000_GPIO_LED_PWR_AMBER	7
@@ -143,7 +144,7 @@ static void __init wnr2000_setup(void)
 					wnr2000_gpio_buttons);
 
 
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 }
 
 MIPS_MACHINE(AR71XX_MACH_WNR2000, "NETGEAR WNR2000", wnr2000_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c

@@ -18,6 +18,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
 
 #define WRT160NL_GPIO_LED_POWER		14
 #define WRT160NL_GPIO_LED_WPS_AMBER	9
@@ -124,7 +125,7 @@ static void __init wrt160nl_setup(void)
 	ar71xx_add_device_m25p80(&wrt160nl_flash_data);
 
 	ar71xx_add_device_usb();
-	ar91xx_add_device_wmac();
+	ar913x_add_device_wmac();
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
 					wrt160nl_leds_gpio);