Upgrade busybox to 1.7.2

- clean up insmod crap - add some lineno/programname fixes for awx - clean up awk getopt stuff - remove unnecessary patches git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-05 00:27:49 +00:00 · 2007-10-05 00:27:49 +00:00 · f6327aee63
parent 7d70e0ec58
commit f6327aee63
48 changed files with 1965 additions and 1303 deletions
--- a/package/busybox/Makefile
+++ b/package/busybox/Makefile
@ -9,13 +9,13 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=busybox
-PKG_VERSION:=1.4.2
+PKG_VERSION:=1.7.2
 PKG_RELEASE:=3

 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://www.busybox.net/downloads \
 		http://distfiles.gentoo.org/distfiles/
-PKG_MD5SUM:=b4c61fb15642be9dde20e8493788c585
+PKG_MD5SUM:=c91ec9756e2000073a9dd8fa9fc3f89e

 include $(INCLUDE_DIR)/package.mk

--- a/package/busybox/config/Config.in
+++ b/package/busybox/config/Config.in
@ -100,8 +100,7 @@ config BUSYBOX_CONFIG_FEATURE_INSTALLER
 	help
 	  Enable 'busybox --install [-s]' support.  This will allow you to use
 	  busybox at runtime to create hard links or symlinks for all the
-	  applets that are compiled into busybox.  This feature requires the
-	  /proc filesystem.
+	  applets that are compiled into busybox.

 config BUSYBOX_CONFIG_LOCALE_SUPPORT
 	bool "Enable locale support (system needs locale for this to work)"
@ -140,6 +139,13 @@ config BUSYBOX_CONFIG_FEATURE_CLEAN_UP
 	  Don't enable this unless you have a really good reason to clean
 	  things up manually.

+config BUSYBOX_CONFIG_FEATURE_PIDFILE
+	bool "Support writing pidfiles"
+	default y
+	help
+	  This option makes some applets (e.g. crond, syslogd, inetd) write
+	  a pidfile in /var/run. Some applications rely on them.
+
 config BUSYBOX_CONFIG_FEATURE_SUID
 	bool "Support for SUID/SGID handling"
 	default y
@ -155,13 +161,6 @@ config BUSYBOX_CONFIG_FEATURE_SUID
 	  are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
 	  and vlock.

-config BUSYBOX_CONFIG_FEATURE_SYSLOG
-	bool "Support for syslog"
-	default y
-	help
-	  This option is auto-selected when you select any applet which may
-	  send its output to syslog. You do not need to select it manually.
-
 config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
 	bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
 	default n if BUSYBOX_CONFIG_FEATURE_SUID
@ -202,14 +201,6 @@ config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET
 	  /etc/busybox.conf should be readable by the user needing the SUID, check
 	  this option to avoid users to be notified about missing permissions.

-config BUSYBOX_CONFIG_FEATURE_HAVE_RPC
-	bool "RPC support"
-	default y
-	help
-	  Select this if you have rpc support.
-	  This automatically turns off all configuration options that rely
-	  on RPC.
-
 config BUSYBOX_CONFIG_SELINUX
 	bool "Support NSA Security Enhanced Linux"
 	default n
@ -230,6 +221,20 @@ config BUSYBOX_CONFIG_SELINUX

 	  Most people will leave this set to 'N'.

+config BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+	bool "exec prefers applets"
+	default y
+	help
+	  This is an experimental option which directs applets about to
+	  call 'exec' to try and find an applicable busybox applet before
+	  searching the PATH. This is typically done by exec'ing
+	  /proc/self/exe.
+	  This may affect shell, find -exec, xargs and similar applets.
+	  They will use applets even if /bin/<applet> -> busybox link
+	  is missing (or is not a link to busybox). However, this causes
+	  problems in chroot jails without mounted /proc and with ps/top
+	  (command name can be shown as 'exe' for applets started this way).
+
 config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH
 	string "Path to BusyBox executable"
 	default "/proc/self/exe"
@ -240,6 +245,22 @@ config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH
 	  executable.  If you haven't got /proc, set this to wherever you
 	  want to run BusyBox from.

+# These are auto-selected by other options
+
+config BUSYBOX_CONFIG_FEATURE_SYSLOG
+	bool "Support for logging to syslog"
+	default y
+	help
+	  This option is auto-selected when you select any applet which may
+	  send its output to syslog. You do not need to select it manually.
+
+config BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	bool "RPC support"
+	default y
+	help
+	  This is automatically selected if any of enabled applets need it.
+	  You do not need to select it manually.
+
 endmenu

 menu 'Build Options'
@ -298,7 +319,7 @@ config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX
 	  You need to have a working dynamic linker to use this variant.

 config BUSYBOX_CONFIG_LFS
-	bool "Support large files over 2 GB"
+	bool
 	default y
 	select BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
 	help
@ -343,21 +364,29 @@ config BUSYBOX_CONFIG_DEBUG

 	  Most people should answer N.

-config BUSYBOX_CONFIG_DEBUG_PESSIMIZE
-	bool "Disable compiler optimizations."
+config BUSYBOX_CONFIG_WERROR
+	bool "Abort compilation on any warning"
 	default n
-	depends on BUSYBOX_CONFIG_DEBUG
 	help
-	  The compiler's optimization of source code can eliminate and reorder
-	  code, resulting in an executable that's hard to understand when
-	  stepping through it with a debugger.  This switches it off, resulting
-	  in a much bigger executable that more closely matches the source
-	  code.
+	  Selecting this will add -Werror to gcc command line.
+
+	  Most people should answer N.
+
+# Seems to be unused
+#config DEBUG_PESSIMIZE
+#	bool "Disable compiler optimizations."
+#	default n
+#	depends on DEBUG
+#	help
+#	  The compiler's optimization of source code can eliminate and reorder
+#	  code, resulting in an executable that's hard to understand when
+#	  stepping through it with a debugger.  This switches it off, resulting
+#	  in a much bigger executable that more closely matches the source
+#	  code.

 choice
 	prompt "Additional debugging library"
 	default BUSYBOX_CONFIG_NO_DEBUG_LIB
-	depends on BUSYBOX_CONFIG_DEBUG
 	help
 	  Using an additional debugging library will make BusyBox become
 	  considerable larger and will cause it to run more slowly.  You
@ -417,31 +446,30 @@ config BUSYBOX_CONFIG_INSTALL_NO_USR
 	  that you really want this behaviour.

 choice
-       prompt "Applets links"
-       default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
-       help
-         Choose how you install applets links.
+	prompt "Applets links"
+	default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
+	help
+	  Choose how you install applets links.

 config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
-       bool "as soft-links"
-       help
-         Install applets as soft-links to the busybox binary. This needs some
-         free inodes on the filesystem, but might help with filesystem
-         generators that can't cope with hard-links.
+	bool "as soft-links"
+	help
+	  Install applets as soft-links to the busybox binary. This needs some
+	  free inodes on the filesystem, but might help with filesystem
+	  generators that can't cope with hard-links.

 config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS
-       bool "as hard-links"
-       help
-         Install applets as hard-links to the busybox binary. This might count
-         on a filesystem with few inodes.
+	bool "as hard-links"
+	help
+	  Install applets as hard-links to the busybox binary. This might count
+	  on a filesystem with few inodes.

 config BUSYBOX_CONFIG_INSTALL_APPLET_DONT
-       bool
-       prompt "not installed"
-       depends on BUSYBOX_CONFIG_FEATURE_INSTALLER || BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
-       help
-         Do not install applet links. Useful when using the -install feature
-         or a standalone shell for rescue pruposes.
+	bool "not installed"
+	depends on BUSYBOX_CONFIG_FEATURE_INSTALLER || BUSYBOX_CONFIG_FEATURE_SH_STANDALONE || BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+	help
+	  Do not install applet links. Useful when using the -install feature
+	  or a standalone shell for rescue purposes.

 endchoice

@ -476,3 +504,5 @@ source package/busybox/config/procps/Config.in
 source package/busybox/config/shell/Config.in
 source package/busybox/config/sysklogd/Config.in
 source package/busybox/config/runit/Config.in
+source package/busybox/config/selinux/Config.in
+source package/busybox/config/ipsvd/Config.in
--- a/package/busybox/config/archival/Config.in
+++ b/package/busybox/config/archival/Config.in
@ -142,6 +142,13 @@ config BUSYBOX_CONFIG_RPM
 	help
 	  Mini RPM applet - queries and extracts RPM packages.

+config BUSYBOX_CONFIG_FEATURE_RPM_BZ2
+	bool "Enable handling of rpms with bzip2-compressed data inside"
+	default n
+	depends on BUSYBOX_CONFIG_RPM
+	help
+	  Enable handling of rpms with bzip2-compressed data inside.
+
 config BUSYBOX_CONFIG_TAR
 	bool "tar"
 	default y
@ -207,6 +214,15 @@ config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
 	  the old GNU format; help to kill this old format by
 	  repacking your ancient archives with the new format.

+config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY
+	bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
+	default n
+	depends on BUSYBOX_CONFIG_TAR
+	help
+	  This option is required to unpack archives created by some old
+	  version of Sun's tar (it was calculating checksum using signed arithmetic).
+	  It is said to be fixed in newer Sun tar, but "old" tarballs still exist.
+
 config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS
 	bool "Enable support for some GNU tar extensions"
 	default y
--- a/package/busybox/config/console-tools/Config.in
+++ b/package/busybox/config/console-tools/Config.in
@ -85,7 +85,7 @@ config BUSYBOX_CONFIG_SETCONSOLE
 config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
 	bool "Enable long options"
 	default n
-	depends on BUSYBOX_CONFIG_SET_CONSOLE && BUSYBOX_CONFIG_GETOPT_LONG
+	depends on BUSYBOX_CONFIG_SETCONSOLE && BUSYBOX_CONFIG_GETOPT_LONG
 	help
 	  Support long options for the setconsole applet.

--- a/package/busybox/config/coreutils/Config.in
+++ b/package/busybox/config/coreutils/Config.in
@ -65,13 +65,6 @@ config BUSYBOX_CONFIG_CKSUM
 	help
 	  cksum is used to calculate the CRC32 checksum of a file.

-config BUSYBOX_CONFIG_CMP
-	bool "cmp"
-	default n
-	help
-	  cmp is used to compare two files and returns the result
-	  to standard output.
-
 config BUSYBOX_CONFIG_COMM
 	bool "comm"
 	default n
@ -142,38 +135,6 @@ config BUSYBOX_CONFIG_DF
 	  df reports the amount of disk space used and available
 	  on filesystems.

-config BUSYBOX_CONFIG_DIFF
-	bool "diff"
-	default n
-	help
-	  diff compares two files or directories and outputs the
-	  differences between them in a form that can be given to
-	  the patch command.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_BINARY
-	bool "Enable checks for binary files"
-	default n
-	depends on BUSYBOX_CONFIG_DIFF
-	help
-	  This option enables support for checking for binary files
-	  before a comparison is carried out.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
-	bool "Enable directory support"
-	default n
-	depends on BUSYBOX_CONFIG_DIFF
-	help
-	  This option enables support for directory and subdirectory
-	  comparison.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_MINIMAL
-	bool "Enable -d option to find smaller sets of changes"
-	default n
-	depends on BUSYBOX_CONFIG_DIFF
-	help
-	  Enabling this option allows the use of -d to make diff
-	  try hard to find the smallest possible set of changes.
-
 config BUSYBOX_CONFIG_DIRNAME
 	bool "dirname"
 	default y
@ -239,6 +200,19 @@ config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS
 	help
 	  Support long options for the env applet.

+config BUSYBOX_CONFIG_EXPAND
+	bool "expand"
+	default n
+	help
+	  By default, convert all tabs to spaces.
+
+config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_EXPAND && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the expand applet.
+
 config BUSYBOX_CONFIG_EXPR
 	bool "expr"
 	default y
@ -474,6 +448,20 @@ config BUSYBOX_CONFIG_PWD
 	help
 	  pwd is used to print the current directory.

+config BUSYBOX_CONFIG_READLINK
+	bool "readlink"
+	default n
+	help
+	  This program reads a symbolic link and returns the name
+	  of the file it points to
+
+config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW
+	bool "Enable canonicalization by following all symlinks (-f)"
+	default n
+	depends on BUSYBOX_CONFIG_READLINK
+	help
+	  Enable the readlink option (-f).
+
 config BUSYBOX_CONFIG_REALPATH
 	bool "realpath"
 	default n
@ -536,6 +524,21 @@ config BUSYBOX_CONFIG_FEATURE_SORT_BIG
 	  The SuSv3 sort standard is available at:
 	  http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html

+config BUSYBOX_CONFIG_SPLIT
+	bool "split"
+	default n
+	help
+	  split a file into pieces.
+
+config BUSYBOX_CONFIG_FEATURE_SPLIT_FANCY
+	bool "fancy extensions"
+	default n
+	depends on BUSYBOX_CONFIG_SPLIT
+	help
+	  Add support for features not required by SUSv3.
+	  Supports additional suffixes 'b' for 512 bytes,
+	  'g' for 1GiB for the -b option.
+
 config BUSYBOX_CONFIG_STAT
 	bool "stat"
 	default n
@ -665,6 +668,19 @@ config BUSYBOX_CONFIG_UNAME
 	help
 	  uname is used to print system information.

+config BUSYBOX_CONFIG_UNEXPAND
+	bool "unexpand"
+	default n
+	help
+	  By default, convert only leading sequences of blanks to tabs.
+
+config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_UNEXPAND && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the unexpand applet.
+
 config BUSYBOX_CONFIG_UNIQ
 	bool "uniq"
 	default y
@ -689,14 +705,6 @@ config BUSYBOX_CONFIG_UUENCODE
 	help
 	  uuencode is used to uuencode a file.

-config BUSYBOX_CONFIG_WATCH
-	bool "watch"
-	default n
-	select BUSYBOX_CONFIG_DATE
-	help
-	  watch is used to execute a program periodically, showing
-	  output to the screen.
-
 config BUSYBOX_CONFIG_WC
 	bool "wc"
 	default y
--- a/package/busybox/config/debianutils/Config.in
+++ b/package/busybox/config/debianutils/Config.in
@ -17,20 +17,6 @@ config BUSYBOX_CONFIG_PIPE_PROGRESS
 	help
 	  Display a dot to indicate pipe activity.

-config BUSYBOX_CONFIG_READLINK
-	bool "readlink"
-	default n
-	help
-	  This program reads a symbolic link and returns the name
-	  of the file it points to
-
-config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW
-	bool "Enable canonicalization by following all symlinks (-f)"
-	default n
-	depends on BUSYBOX_CONFIG_READLINK
-	help
-	  Enable the readlink option (-f).
-
 config BUSYBOX_CONFIG_RUN_PARTS
 	bool "run-parts"
 	default n
@ -53,6 +39,15 @@ config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS
 	help
 	  Support long options for the run-parts applet.

+config BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY
+	bool "Support additional arguments"
+	default n
+	depends on BUSYBOX_CONFIG_RUN_PARTS
+	help
+	  Support additional options:
+	  -l --list print the names of the all matching files (not
+	            limited to executables), but don't actually run them.
+
 config BUSYBOX_CONFIG_START_STOP_DAEMON
 	bool "start-stop-daemon"
 	default y
--- a/package/busybox/config/editors/Config.in
+++ b/package/busybox/config/editors/Config.in
@ -27,6 +27,45 @@ config BUSYBOX_CONFIG_FEATURE_AWK_MATH
 	  Enable math functions of the Awk programming language.
 	  NOTE: This will require libm to be present for linking.

+config BUSYBOX_CONFIG_CMP
+	bool "cmp"
+	default n
+	help
+	  cmp is used to compare two files and returns the result
+	  to standard output.
+
+config BUSYBOX_CONFIG_DIFF
+	bool "diff"
+	default y
+	help
+	  diff compares two files or directories and outputs the
+	  differences between them in a form that can be given to
+	  the patch command.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_BINARY
+	bool "Enable checks for binary files"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  This option enables support for checking for binary files
+	  before a comparison is carried out.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
+	bool "Enable directory support"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  This option enables support for directory and subdirectory
+	  comparison.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_MINIMAL
+	bool "Enable -d option to find smaller sets of changes"
+	default n
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  Enabling this option allows the use of -d to make diff
+	  try hard to find the smallest possible set of changes.
+
 config BUSYBOX_CONFIG_ED
 	bool "ed"
 	default n
@ -57,6 +96,16 @@ config BUSYBOX_CONFIG_VI
 	  learning curve.  If you are not already comfortable with 'vi'
 	  you may wish to use something else.

+config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN
+	int "Maximum line length in vi"
+	range 256 16384
+	default 1024
+	depends on BUSYBOX_CONFIG_VI
+	help
+	  vi uses on-stack buffers for intermediate line buffers.
+	  You may want to decrease this parameter if your target machine
+	  benefits from smaller stack usage.
+
 config BUSYBOX_CONFIG_FEATURE_VI_COLON
 	bool "Enable \":\" colon commands (no \"ex\" mode)"
 	default y
--- a/package/busybox/config/findutils/Config.in
+++ b/package/busybox/config/findutils/Config.in
@ -30,7 +30,7 @@ config BUSYBOX_CONFIG_FEATURE_FIND_MTIME
 	  files, in days.

 config BUSYBOX_CONFIG_FEATURE_FIND_MMIN
-	bool "Enable modified time matching (-min) option"
+	bool "Enable modified time matching (-mmin) option"
 	default n
 	depends on BUSYBOX_CONFIG_FIND
 	help
@ -57,8 +57,14 @@ config BUSYBOX_CONFIG_FEATURE_FIND_XDEV
 	default y
 	depends on BUSYBOX_CONFIG_FIND
 	help
-	  This option will allow find to restrict searches to a single
-	  filesystem.
+	  This option allows find to restrict searches to a single filesystem.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_MAXDEPTH
+	bool "Enable -maxdepth N option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  This option enables -maxdepth N option.

 config BUSYBOX_CONFIG_FEATURE_FIND_NEWER
 	bool "Enable -newer option for comparing file mtimes"
@ -83,6 +89,88 @@ config BUSYBOX_CONFIG_FEATURE_FIND_EXEC
 	  Support the 'find -exec' option for executing commands based upon
 	  the files matched.

+config BUSYBOX_CONFIG_FEATURE_FIND_USER
+	bool "Enable username/uid matching (-user) option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -user' option for searching by username or uid.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_GROUP
+	bool "Enable group/gid matching (-group) option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -group' option for searching by group name or gid.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_NOT
+	bool "Enable the 'not' (!) operator"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the '!' operator to invert the test results.
+	  If 'Enable full-blown desktop' is enabled, then will also support
+	  the non-POSIX notation '-not'.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_DEPTH
+	bool "Enable the -depth option"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Process each directory's contents before the directory itself.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_PAREN
+	bool "Enable parens in options"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Enable usage of parens '(' to specify logical order of arguments.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_SIZE
+	bool "Enable (-size) option allowing matching for file size"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  Support the 'find -size' option for searching by file size.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_PRUNE
+	bool "Enable (-prune) option allowing to exclude subdirectories"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  If the file is a directory, dont descend into it. Useful for
+	  exclusion .svn and CVS directories.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_DELETE
+	bool "Enable -delete option allowing to delete files"
+	default n
+	depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_FEATURE_FIND_DEPTH
+	help
+	  Support the 'find -delete' option for deleting files and direcotries.
+	  WARNING: This option can do much harm if used wrong. Busybox will not
+	  try to protect the user from doing stupid things. Use with care.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_PATH
+	bool "Enable -path option allowing to match pathname patterns"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  The -path option matches whole pathname instead of just filename.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_REGEX
+	bool "Enable -regex: match pathname to regex"
+	default y
+	depends on BUSYBOX_CONFIG_FIND
+	help
+	  The -regex option matches whole pathname against regular expression.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_CONTEXT
+	bool "Enable (-context) option for matching security context"
+	default n
+	depends on BUSYBOX_CONFIG_FIND && BUSYBOX_CONFIG_SELINUX
+	help
+	  Support the 'find -context' option for matching security context.
+
 config BUSYBOX_CONFIG_GREP
 	bool "grep"
 	default y
--- a/package/busybox/config/init/Config.in
+++ b/package/busybox/config/init/Config.in
@ -38,6 +38,11 @@ config BUSYBOX_CONFIG_FEATURE_INIT_SCTTY
 	  behavour, but is often what you want in an embedded system where
 	  the console is only accessed during development or for maintenance.

+config BUSYBOX_CONFIG_FEATURE_INIT_SYSLOG
+	bool "Enable init to write to syslog"
+	default y
+	depends on BUSYBOX_CONFIG_INIT
+
 config BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET
 	bool "Be _extra_ quiet on boot"
 	default n
--- a/package/busybox/config/ipsvd/Config.in
+++ b/package/busybox/config/ipsvd/Config.in
@ -0,0 +1,20 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "ipsvd utilities"
+
+config BUSYBOX_CONFIG_TCPSVD
+	bool "tcpsvd"
+	default n
+	help
+	  tcpsvd listens on a tcp port and runs a program for each new connection
+
+config BUSYBOX_CONFIG_UDPSVD
+	bool "udpsvd"
+	default n
+	help
+	  udpsvd listens on a udp port and runs a program for each new connection
+
+endmenu
--- a/package/busybox/config/libbb/Config.in
+++ b/package/busybox/config/libbb/Config.in
@ -26,4 +26,105 @@ config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
 	  2                   3.0                5088
 	  3 (smallest)        5.1                4912

+config BUSYBOX_CONFIG_FEATURE_FAST_TOP
+	bool "Faster /proc scanning code (+100 bytes)"
+	default y
+	help
+	  This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
+	  but code size is slightly bigger.
+
+config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
+	bool "Support for /etc/networks"
+	default n
+	help
+	  Enable support for network names in /etc/networks. This is
+	  a rarely used feature which allows you to use names
+	  instead of IP/mask pairs in route command.
+
+config BUSYBOX_CONFIG_FEATURE_EDITING
+	bool "Command line editing"
+	default y
+	help
+	  Enable line editing (mainly for shell command line).
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
+	int "Maximum length of input"
+	range 128 8192
+	default 512
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Line editing code uses on-stack buffers for storage.
+	  You may want to decrease this parameter if your target machine
+	  benefits from smaller stack usage.
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_KEYS
+	bool "Additional editing keys"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Enable additonal editing keys (Ctrl-E, Ctrl-U etc).
+	  Arrow keys, Home/End/Delete and Ctrl-W work even without this option.
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_VI
+	bool "vi-style line editing commands"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Enable vi-style line editing.  In shells, this mode can be
+	  turned on and off with "set -o vi" and "set +o vi".
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
+	int "History size"
+	range 0 99999
+	default 256
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Specify command history size.
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
+	bool "History saving"
+	default n
+	depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Enable history saving in ash shell.
+
+config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
+	bool "Tab completion"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Enable tab completion.
+
+config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION
+	bool "Username completion"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
+	help
+	  Enable username completion.
+
+config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
+	bool "Fancy shell prompts"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING
+	help
+	  Setting this option allows for prompts to use things like \w and
+	  \$ and escape codes.
+
+config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
+	bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
+	default n
+	help
+	  Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
+	  time intervals (time, ping, traceroute etc need this).
+	  Probably requires Linux 2.6+. If not selected, gettimeofday
+	  will be used instead (which gives wrong results if date/time
+	  is reset).
+
+config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
+	bool "Use ioctl names rather than hex values in error messages"
+	default y
+	help
+	  Use ioctl names rather than hex values in error messages
+	  (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
+	  saves about 1400 bytes.
 endmenu
--- a/package/busybox/config/loginutils/Config.in
+++ b/package/busybox/config/loginutils/Config.in
@ -59,12 +59,29 @@ config BUSYBOX_CONFIG_ADDGROUP
 	help
 	  Utility for creating a new group account.

+config BUSYBOX_CONFIG_FEATURE_ADDUSER_TO_GROUP
+	bool "Support for adding users to groups"
+	default n
+	depends on BUSYBOX_CONFIG_ADDGROUP
+	help
+	  If  called  with two non-option arguments,
+	  addgroup will add an existing user to an
+	  existing group.
+
 config BUSYBOX_CONFIG_DELGROUP
 	bool "delgroup"
 	default n
 	help
 	  Utility for deleting a group account.

+config BUSYBOX_CONFIG_FEATURE_DEL_USER_FROM_GROUP
+	bool "Support for removing users from groups."
+	default n
+	depends on BUSYBOX_CONFIG_DELGROUP
+	help
+	  If called with two non-option arguments, deluser
+	  or delgroup will remove an user from a specified group.
+
 config BUSYBOX_CONFIG_ADDUSER
 	bool "adduser"
 	default n
@ -111,6 +128,13 @@ config BUSYBOX_CONFIG_LOGIN
 	  Note that Busybox binary must be setuid root for this applet to
 	  work properly.

+config BUSYBOX_CONFIG_PAM
+	bool "Support for PAM (Pluggable Authentication Modules)"
+	default n
+	depends on BUSYBOX_CONFIG_LOGIN
+	help
+	  Use PAM in login(1) instead of direct access to password database.
+
 config BUSYBOX_CONFIG_LOGIN_SCRIPTS
 	bool "Support for login scripts"
 	depends on BUSYBOX_CONFIG_LOGIN
@ -119,12 +143,20 @@ config BUSYBOX_CONFIG_LOGIN_SCRIPTS
 	  Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
 	  just prior to switching from root to logged-in user.

+config BUSYBOX_CONFIG_FEATURE_NOLOGIN
+	bool "Support for /etc/nologin"
+	default n
+	depends on BUSYBOX_CONFIG_LOGIN
+	help
+	  The file /etc/nologin is used by (some versions of) login(1).
+	  If it exists, non-root logins are prohibited.
+
 config BUSYBOX_CONFIG_FEATURE_SECURETTY
 	bool "Support for /etc/securetty"
 	default n
 	depends on BUSYBOX_CONFIG_LOGIN
 	help
-	  The file  /etc/securetty  is used by (some versions of) login(1).
+	  The file /etc/securetty is used by (some versions of) login(1).
 	  The file contains the device names of tty lines (one per line,
 	  without leading /dev/) on which root is allowed to login.

@ -149,6 +181,20 @@ config BUSYBOX_CONFIG_FEATURE_PASSWD_WEAK_CHECK
 	help
 	  With this option passwd will refuse new passwords which are "weak".

+config BUSYBOX_CONFIG_CRYPTPW
+	bool "cryptpw"
+	default n
+	help
+	  Applet for crypting a string.
+
+config BUSYBOX_CONFIG_CHPASSWD
+       bool "chpasswd"
+       default n
+       help
+         chpasswd  reads  a  file  of user name and password pairs from
+         standard input and uses this information to update a group of
+         existing users.
+
 config BUSYBOX_CONFIG_SU
 	bool "su"
 	default n
--- a/package/busybox/config/miscutils/Config.in
+++ b/package/busybox/config/miscutils/Config.in
@ -19,6 +19,13 @@ config BUSYBOX_CONFIG_BBCONFIG
 	  The bbconfig applet will print the config file with which
 	  busybox was built.

+config BUSYBOX_CONFIG_CHRT
+	bool "chrt"
+	default n
+	help
+	  manipulate real-time attributes of a process.
+	  This requires sched_{g,s}etparam support in your libc.
+
 config BUSYBOX_CONFIG_CROND
 	bool "crond"
 	default y
@ -256,19 +263,19 @@ config BUSYBOX_CONFIG_MAKEDEVS
 	  'leaf' is traditionally what busybox follows, it allows multiple
 	  devices of a particluar type to be created per command.
 	  e.g. /dev/hda[0-9]
-          Device properties are passed as command line arguments.
+	  Device properties are passed as command line arguments.
 	  .
 	  'table' reads device properties from a file or stdin, allowing
 	  a batch of unrelated devices to be made with one command.
-          User/group names are allowed as an alternative to uid/gid.
+	  User/group names are allowed as an alternative to uid/gid.

 choice
 	prompt "Choose makedevs behaviour"
-	depends BUSYBOX_CONFIG_MAKEDEVS
+	depends on BUSYBOX_CONFIG_MAKEDEVS
 	default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE

 config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF
-        bool "leaf"
+	bool "leaf"

 config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
 	bool "table"
@ -289,12 +296,6 @@ config BUSYBOX_CONFIG_MT
 	  to advance or rewind a tape past a specified number of archive
 	  files on the tape.

-config BUSYBOX_CONFIG_NMETER
-	bool "nmeter"
-	default n
-	help
-	  nmeter prints various system parameters continuously.
-
 config BUSYBOX_CONFIG_RAIDAUTORUN
 	bool "raidautorun"
 	default n
@ -303,11 +304,11 @@ config BUSYBOX_CONFIG_RAIDAUTORUN
 	  search and start RAID arrays.

 config BUSYBOX_CONFIG_READAHEAD
-        bool "readahead"
+	bool "readahead"
 	default n
-	depends on LFS
+	depends on BUSYBOX_CONFIG_LFS
 	help
- 	  Preload the files listed on the command line into RAM cache so that
+	  Preload the files listed on the command line into RAM cache so that
 	  subsequent reads on these files will not block on disk I/O.

 	  This applet just calls the readahead(2) system call on each file.
@ -320,19 +321,19 @@ config BUSYBOX_CONFIG_READAHEAD
 	  run this applet as a background job.

 config BUSYBOX_CONFIG_RUNLEVEL
-        bool "runlevel"
+	bool "runlevel"
 	default n
 	help
- 	  find the current and previous system runlevel.
+	  find the current and previous system runlevel.

 	  This applet uses utmp but does not rely on busybox supporing
 	  utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.

 config BUSYBOX_CONFIG_RX
-        bool "rx"
+	bool "rx"
 	default n
 	help
- 	  Receive files using the Xmodem protocol.
+	  Receive files using the Xmodem protocol.

 config BUSYBOX_CONFIG_STRINGS
 	bool "strings"
@ -371,6 +372,14 @@ config BUSYBOX_CONFIG_TIME
 	  When the command finishes, time writes a message to standard output
 	  giving timing statistics about this program run.

+config BUSYBOX_CONFIG_TTYSIZE
+	bool "ttysize"
+	default n
+	help
+	  A replacement for "stty size". Unlike stty, can report only width,
+	  only height, or both, in any order. It also does not complain on error,
+	  but returns default 80x24. Usage in shell scripts: width=`ttysize w`.
+
 config BUSYBOX_CONFIG_WATCHDOG
 	bool "watchdog"
 	default y
--- a/package/busybox/config/modutils/Config.in
+++ b/package/busybox/config/modutils/Config.in
@ -134,7 +134,7 @@ config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
 config BUSYBOX_CONFIG_FEATURE_2_4_MODULES
 	# Simulate indentation
 	bool "Support version 2.2.x to 2.4.x Linux kernels"
-	default y
+	default n
 	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE
 	help
 	  Support module loading for 2.2.x and 2.4.x Linux kernels.
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@ -12,17 +12,25 @@ config BUSYBOX_CONFIG_FEATURE_IPV6
 	  Enable IPv6 support in busybox.
 	  This adds IPv6 support in the networking applets.

+config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
+	bool "Verbose resolution errors"
+	default y
+	help
+	  Enable if you are not satisfied with simplistic
+	  "can't resolve 'hostname.com'" and want to know more.
+	  This may increase size of your executable a bit.
+
 config BUSYBOX_CONFIG_ARP
 	bool "arp"
 	default n
 	help
-	  Manipulate the system ARP cache
+	  Manipulate the system ARP cache.

 config BUSYBOX_CONFIG_ARPING
 	bool "arping"
 	default y
 	help
-	  Ping hosts by ARP packets
+	  Ping hosts by ARP packets.

 config BUSYBOX_CONFIG_DNSD
 	bool "dnsd"
@ -67,7 +75,7 @@ config BUSYBOX_CONFIG_HOSTNAME
 	bool "hostname"
 	default n
 	help
-	  Show or set the system's host name
+	  Show or set the system's host name.

 config BUSYBOX_CONFIG_HTTPD
 	bool "httpd"
@ -75,6 +83,14 @@ config BUSYBOX_CONFIG_HTTPD
 	help
 	  Serve web pages via an HTTP server.

+config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
+	bool "Use sendfile system call"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  When enabled, httpd will use the kernel sendfile() function
+	  instead of read/write loop.
+
 config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
 	bool "Support reloading the global config file using hup signal"
 	default y
@ -132,7 +148,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 	help
 	  This option enables support for running scripts through an
 	  interpreter. Turn this on if you want PHP scripts to work
-	  properly. You need to supply an addition line in your httpd
+	  properly. You need to supply an additional line in your httpd
 	  config file:
 	  *.php:/path/to/your/php

@ -154,6 +170,19 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
 	  For example, httpd -e "<Hello World>" as
 	  "&#60Hello&#32World&#62".

+config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
+	bool "Enable support for custom error pages"
+	default y
+	depends on BUSYBOX_CONFIG_HTTPD
+	help
+	  This option allows you to define custom error pages in
+	  the configuration file instead of the default HTTP status
+	  error pages. For instance, if you add the line:
+	        E404:/path/e404.html
+	  in the config file, the server will respond the specified
+	  '/path/e404.html' file instead of the terse '404 NOT FOUND'
+	  message.
+
 config BUSYBOX_CONFIG_IFCONFIG
 	bool "ifconfig"
 	default y
@ -204,7 +233,6 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
 config BUSYBOX_CONFIG_IFUPDOWN
 	bool "ifupdown"
 	default n
-	select BUSYBOX_CONFIG_RUN_PARTS
 	help
 	  Activate or deactivate the specified interfaces.  This applet makes
 	  use of either "ifconfig" and "route" or the "ip" command to actually
@ -215,8 +243,18 @@ config BUSYBOX_CONFIG_IFUPDOWN
 	  against my better judgement (since this will surely result in plenty
 	  of support questions on the mailing list), I do not force you to
 	  enable these additional options.  It is up to you to supply either
-	  "ifconfig" and "route" or the "ip" command, either via busybox or via
-	  standalone utilities.
+	  "ifconfig", "route" and "run-parts" or the "ip" command, either
+	  via busybox or via standalone utilities.
+
+config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
+	string "Absolute path to ifstate file"
+	default "/var/run/ifstate"
+	help
+	  ifupdown keeps state information in a file called ifstate.
+	  Typically it is located in /var/run/ifstate, however
+	  some distributions tend to put it in other places
+	  (debian, for example, uses /etc/network/run/ifstate).
+	  This config option defines location of ifstate.

 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 	bool "Use ip applet"
@ -259,7 +297,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
 	default n
 	depends on BUSYBOX_CONFIG_IFUPDOWN
 	help
-	  If you want busybox to talk IPv4, leave this on.
+	  If you want ifup/ifdown to talk IPv4, leave this on.

 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 	bool "Enable support for IPv6"
@ -268,13 +306,14 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 	help
 	  If you need support for IPv6, turn this option on.

-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
-	bool "Enable support for IPX"
-	default n
-	depends on BUSYBOX_CONFIG_IFUPDOWN
-	help
-	  If this option is selected you can use busybox to work with IPX
-	  networks.
+### UNUSED
+### config FEATURE_IFUPDOWN_IPX
+### 	bool "Enable support for IPX"
+### 	default n
+### 	depends on IFUPDOWN
+### 	help
+### 	  If this option is selected you can use busybox to work with IPX
+### 	  networks.

 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
 	bool "Enable mapping support"
@ -284,6 +323,16 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
 	  This enables support for the "mapping" stanza, unless you have
 	  a weird network setup you don't need it.

+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+	bool "Enable support for external dhcp clients"
+	default n
+	depends on BUSYBOX_CONFIG_IFUPDOWN
+	help
+	  This enables support for the external dhcp clients. Clients are
+	  tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+	  Otherwise, if udhcpc applet is enabled, it is used.
+	  Otherwise, ifup/ifdown will have no support for DHCP.
+
 config BUSYBOX_CONFIG_INETD
 	bool "inetd"
 	default n
@ -330,7 +379,7 @@ config BUSYBOX_CONFIG_FEATURE_INETD_RPC
 	bool "Support RPC services"
 	default n
 	depends on BUSYBOX_CONFIG_INETD
-	depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 	help
 	  Support Sun-RPC based services

@ -387,6 +436,7 @@ config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
 	  ip link   -> iplink
 	  ip route  -> iproute
 	  ip tunnel -> iptunnel
+	  ip rule   -> iprule

 	  Say N unless you desparately need the short form of the ip
 	  object commands.
@ -466,7 +516,7 @@ config BUSYBOX_CONFIG_NETMSG
 	  simple program for sending udp broadcast messages

 config BUSYBOX_CONFIG_NC_SERVER
-	bool "Netcat server options (-lp)"
+	bool "Netcat server options (-l)"
 	default n
 	depends on BUSYBOX_CONFIG_NC
 	help
@ -487,6 +537,14 @@ config BUSYBOX_CONFIG_NETSTAT
 	help
 	  netstat prints information about the Linux networking subsystem.

+config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
+	bool "  Enable wide netstat output"
+	default y
+	depends on BUSYBOX_CONFIG_NETSTAT
+	help
+	  Add support for wide columns. Useful when displaying IPv6 addresses
+	  (-W option).
+
 config BUSYBOX_CONFIG_NSLOOKUP
 	bool "nslookup"
 	default y
@ -500,6 +558,19 @@ config BUSYBOX_CONFIG_PING
 	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
 	  elicit an ICMP ECHO_RESPONSE from a host or gateway.

+config BUSYBOX_CONFIG_PING6
+	bool "ping6"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
+	help
+	  This will give you a ping that can talk IPv6.
+
+config BUSYBOX_CONFIG_PSCAN
+	bool "pscan"
+	default n
+	help
+	  Simple network port scanner.
+
 config BUSYBOX_CONFIG_FEATURE_FANCY_PING
 	bool "Enable fancy ping output"
 	default y
@ -508,27 +579,18 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_PING
 	  Make the output from the ping applet include statistics, and at the
 	  same time provide full support for ICMP packets.

-config BUSYBOX_CONFIG_PING6
-	bool "ping6"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_IPV6
-	help
-	  This will give you a ping that can talk IPv6.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
-	bool "Enable fancy ping6 output"
-	default y
-	depends on BUSYBOX_CONFIG_PING6
-	help
-	  Make the output from the ping6 applet include statistics, and at the
-	  same time provide full support for ICMP packets.
-
 config BUSYBOX_CONFIG_ROUTE
 	bool "route"
 	default y
 	help
 	  Route displays or manipulates the kernel's IP routing tables.

+config BUSYBOX_CONFIG_SLATTACH
+	bool "slattach"
+	default n
+	help
+	  slattach is a small utility to attach network interfaces to serial lines.
+
 config BUSYBOX_CONFIG_TELNET
 	bool "telnet"
 	default y
@ -703,13 +765,6 @@ config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
 	help
 	  Support authenticated HTTP transfers.

-config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
-	bool "Enable IPv6 literal addresses"
-	default y
-	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_FEATURE_IPV6
-	help
-	  Support IPv6 address literal notation in URLs.
-
 config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
 	bool "Enable long options"
 	default y
--- a/package/busybox/config/networking/udhcp/Config.in
+++ b/package/busybox/config/networking/udhcp/Config.in
@ -32,6 +32,16 @@ config BUSYBOX_CONFIG_APP_DUMPLEASES

 	  See http://udhcp.busybox.net for further details.

+config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
+	bool "Rewrite the lease file at every new acknowledge"
+	default n
+	depends on BUSYBOX_CONFIG_APP_UDHCPD
+	help
+	  If selected, udhcpd will write a new file with leases every
+	  time a new lease has been accepted, thus eleminating the need
+	  to send SIGUSR1 for the initial writing, or updating. Any timed
+	  rewriting remains undisturbed
+
 config BUSYBOX_CONFIG_APP_UDHCPC
 	bool "udhcp Client (udhcpc)"
 	default y
@ -44,17 +54,6 @@ config BUSYBOX_CONFIG_APP_UDHCPC

 	  See http://udhcp.busybox.net for further details.

-config BUSYBOX_CONFIG_FEATURE_UDHCP_SYSLOG
-	bool "Log udhcp messages to syslog"
-	default n
-	depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  If not daemonized, udhcpd prints its messages to stdout/stderr.
-	  If this option is selected, it will also log them to syslog.
-
-	  See http://udhcp.busybox.net for further details.
-
 config BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG
 	bool "Compile udhcp with noisy debugging messages"
 	default n
@ -65,3 +64,11 @@ config BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG
 	  the background.

 	  See http://udhcp.busybox.net for further details.
+
+config BUSYBOX_CONFIG_FEATURE_RFC3397
+	bool "Support for RFC3397 domain search (experimental)"
+	default y
+	depends on BUSYBOX_CONFIG_APP_UDHCPD || BUSYBOX_CONFIG_APP_UDHCPC
+	help
+	  If selected, both client and server will support passing of domain
+	  search lists via option 119, specified in RFC3397.
--- a/package/busybox/config/procps/Config.in
+++ b/package/busybox/config/procps/Config.in
@ -43,6 +43,12 @@ config BUSYBOX_CONFIG_KILLALL5
 	default y
 	depends on BUSYBOX_CONFIG_KILL

+config BUSYBOX_CONFIG_NMETER
+	bool "nmeter"
+	default n
+	help
+	  Prints selected system stats continuously, one line per update.
+
 config BUSYBOX_CONFIG_PIDOF
 	bool "pidof"
 	default y
@ -74,7 +80,7 @@ config BUSYBOX_CONFIG_PS

 config BUSYBOX_CONFIG_FEATURE_PS_WIDE
 	bool "Enable argument for wide output (-w)"
-	default y
+	default n
 	depends on BUSYBOX_CONFIG_PS
 	help
 	  Support argument 'w' for wide output.
@ -102,11 +108,25 @@ config BUSYBOX_CONFIG_TOP
 	  system.

 config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
-	bool "Support showing CPU usage percentage (add 2k bytes)"
+	bool "Show CPU per-process usage percentage (adds 2k bytes)"
 	default y
 	depends on BUSYBOX_CONFIG_TOP
 	help
-	  Make top display CPU usage.
+	  Make top display CPU usage for each process.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
+	bool "Show CPU global usage percentage (adds 0.5k bytes)"
+	default y
+	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	help
+	  Makes top display "CPU: NN% usr NN% sys..." line.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS
+	bool "Show 1/10th of a percent in CPU/mem statistics (adds 0.3k bytes)"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	help
+	  Show 1/10th of a percent in CPU/mem statistics.

 config BUSYBOX_CONFIG_UPTIME
 	bool "uptime"
@ -116,6 +136,14 @@ config BUSYBOX_CONFIG_UPTIME
 	  the system has been running, how many users are currently logged
 	  on, and the system load averages for the past 1, 5, and 15 minutes.

+config BUSYBOX_CONFIG_WATCH
+	bool "watch"
+	default n
+	#huh?? select DATE
+	help
+	  watch is used to execute a program periodically, showing
+	  output to the screen.
+

 endmenu

--- a/package/busybox/config/selinux/Config.in
+++ b/package/busybox/config/selinux/Config.in
@ -0,0 +1,108 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Selinux Utilities"
+	depends on BUSYBOX_CONFIG_SELINUX
+
+config BUSYBOX_CONFIG_CHCON
+	bool "chcon"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to change the security context of file.
+
+config BUSYBOX_CONFIG_FEATURE_CHCON_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_CHCON && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the chcon applet.
+
+config BUSYBOX_CONFIG_GETENFORCE
+	bool "getenforce"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to get the current mode of SELinux.
+
+config BUSYBOX_CONFIG_GETSEBOOL
+	bool "getsebool"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to get SELinux boolean values.
+
+config BUSYBOX_CONFIG_LOAD_POLICY
+	bool "load_policy"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to load SELinux policy.
+
+config BUSYBOX_CONFIG_MATCHPATHCON
+	bool "matchpathcon"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to get default security context of the
+	  specified path from the file contexts configuration.
+
+config BUSYBOX_CONFIG_RESTORECON
+	bool "restorecon"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to relabel files. The feature is almost
+	  the same as setfiles, but usage is a little different.
+
+config BUSYBOX_CONFIG_RUNCON
+	bool "runcon"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to run command in speficied security context.
+
+config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_CONFIG_RUNCON && BUSYBOX_CONFIG_GETOPT_LONG
+	help
+	  Support long options for the runcon applet.
+
+config BUSYBOX_CONFIG_SELINUXENABLED
+	bool "selinuxenabled"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support for this command to be used within shell scripts
+	  to determine if selinux is enabled.
+
+config BUSYBOX_CONFIG_SETENFORCE
+	bool "setenforce"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to modify the mode SELinux is running in.
+
+config BUSYBOX_CONFIG_SETFILES
+	bool "setfiles"
+	default n
+	depends on BUSYBOX_CONFIG_SELINUX
+	help
+	  Enable support to modify to relabel files.
+	  Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64,
+	  (It is default in libselinux's Makefile), you _must_ enable
+	  CONFIG_LFS.
+
+config BUSYBOX_CONFIG_FEATURE_SETFILES_CHECK_OPTION
+	bool "Enable check option"
+	default n
+	depends on BUSYBOX_CONFIG_SETFILES
+	help
+	  Support "-c" option (check the validity of the contexts against
+	  the specified binary policy) for setfiles. Requires libsepol.
+
+endmenu
+
--- a/package/busybox/config/shell/Config.in
+++ b/package/busybox/config/shell/Config.in
@ -87,7 +87,7 @@ config BUSYBOX_CONFIG_ASH_MATH_SUPPORT

 config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
 	bool "Extend Posix math support to 64 bit"
-	default n
+	default y
 	depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
 	help
 	  Enable 64-bit math support in the ash shell.  This will make
@ -107,7 +107,7 @@ config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
 	select BUSYBOX_CONFIG_ECHO
 	depends on BUSYBOX_CONFIG_ASH
 	help
-	  Enable support for echo, built in to ash.
+	  Enable support for echo, builtin to ash.

 config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
 	bool "Builtin version of 'test'"
@ -115,7 +115,7 @@ config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
 	select BUSYBOX_CONFIG_TEST
 	depends on BUSYBOX_CONFIG_ASH
 	help
-	  Enable support for test, built in to ash.
+	  Enable support for test, builtin to ash.

 config BUSYBOX_CONFIG_ASH_CMDCMD
 	bool "'command' command to override shell builtins"
@ -135,7 +135,7 @@ config BUSYBOX_CONFIG_ASH_MAIL

 config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
 	bool "Optimize for size instead of speed"
-	default y
+	default n
 	depends on BUSYBOX_CONFIG_ASH
 	help
 	  Compile ash for reduced size at the price of speed.
@ -153,7 +153,7 @@ config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT

 config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
 	bool "Expand prompt string"
-	default n
+	default y
 	depends on BUSYBOX_CONFIG_ASH
 	help
 	  "PS#" may be contain volatile content, such as backquote commands.
@ -176,6 +176,54 @@ config BUSYBOX_CONFIG_HUSH
 	  word ), arithmetic expansion, aliases, brace expansion, tilde
 	  expansion, &> and >& redirection of stdout+stderr, etc.

+config BUSYBOX_CONFIG_HUSH_HELP
+	bool "help builtin"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable help builtin in hush. Code size + ~1 kbyte.
+
+config BUSYBOX_CONFIG_HUSH_INTERACTIVE
+	bool "Interactive mode"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable interactive mode (prompt and command editing).
+	  Without this, hush simply reads and executes commands
+	  from stdin just like a shell script from the file.
+	  No prompt, no PS1/PS2 magic shell variables.
+
+config BUSYBOX_CONFIG_HUSH_JOB
+	bool "Job control"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE
+	help
+	  Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
+	  command (not entire shell), fg/bg builtins work. Without this option,
+	  "cmd &" still works by simply spawning a process and immediately
+	  prompting for next command (or executing next command in a script),
+	  but no separate process group is formed.
+
+config BUSYBOX_CONFIG_HUSH_TICK
+	bool "Process substitution"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable process substitution `command` and $(command) in hush.
+
+config BUSYBOX_CONFIG_HUSH_IF
+	bool "Support if/then/elif/else/fi"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable if/then/elif/else/fi in hush.
+
+config BUSYBOX_CONFIG_HUSH_LOOPS
+	bool "Support for, while and until loops"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable for, while and until loops in hush.

 config BUSYBOX_CONFIG_LASH
 	bool "lash"
@ -216,12 +264,12 @@ config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET
 	help
 	  Remove the busybox introduction when starting a shell.

-config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
+config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
 	bool "Standalone shell"
 	default n
-	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+	depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
 	help
-	  This option causes the selected busybox shell to use busybox applets
+	  This option causes busybox shells to use busybox applets
 	  in preference to executables in the PATH whenever possible.  For
 	  example, entering the command 'ifconfig' into the shell would cause
 	  busybox to use the ifconfig busybox applet.  Specifying the fully
@ -230,66 +278,43 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
 	  is generally used when creating a statically linked version of busybox
 	  for use as a rescue shell, in the event that you screw up your system.

-	  Note that this will *also* cause applets to take precedence
-	  over shell builtins of the same name.  So turning this on will
-	  eliminate any performance gained by turning on the builtin "echo"
-	  and "test" commands in ash.
+	  This is implemented by re-execing /proc/self/exe (typically)
+	  with right parameters. Some selected applets ("NOFORK" applets)
+	  can even be executed without creating new process.
+	  Instead, busybox will call <applet>_main() internally.

-	  Note that when using this option, the shell will attempt to directly
-	  run '/bin/busybox'.  If you do not have the busybox binary sitting in
-	  that exact location with that exact name, this option will not work at
-	  all.
+	  However, this causes problems in chroot jails without mounted /proc
+	  and with ps/top (command name can be shown as 'exe' for applets
+	  started this way).
+# untrue?
+#	  Note that this will *also* cause applets to take precedence
+#	  over shell builtins of the same name.  So turning this on will
+#	  eliminate any performance gained by turning on the builtin "echo"
+#	  and "test" commands in ash.
+# untrue?
+#	  Note that when using this option, the shell will attempt to directly
+#	  run '/bin/busybox'.  If you do not have the busybox binary sitting in
+#	  that exact location with that exact name, this option will not work at
+#	  all.

-config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
-	bool "Command line editing"
-	default y
-	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
-	help
-	  Enable command editing in shell.
-
-config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING_VI
-	bool "vi-style line editing commands"
+config BUSYBOX_CONFIG_CTTYHACK
+	bool "cttyhack"
 	default n
-	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
 	help
-	  Enable vi-style line editing in the shell.  This mode can be
-	  turned on and off with "set -o vi" and "set +o vi".
+	  One common problem reported on the mailing list is "can't access tty;
+	  job control turned off" error message which typically appears when
+	  one tries to use shell with stdin/stdout opened to /dev/console.
+	  This device is special - it cannot be a controlling tty.

-config BUSYBOX_CONFIG_FEATURE_COMMAND_HISTORY
-	int "History size"
-	range 0 99999
-	default 15
-	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
-	help
-	  Specify command history size in shell.
+	  Proper solution is to use correct device instead of /dev/console.

-config BUSYBOX_CONFIG_FEATURE_COMMAND_SAVEHISTORY
-	bool "History saving"
-	default n
-	depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
-	help
-	  Enable history saving in ash shell.
+	  cttyhack provides "quick and dirty" solution to this problem.
+	  It analyzes stdin with various ioctls, trying to determine whether
+	  it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
+	  If it detects one, it closes stdin/out/err and reopens that device.
+	  Then it executes given program. Usage example for /etc/inittab
+	  (for busybox init):

-config BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
-	bool "Tab completion"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
-	help
-	  Enable tab completion in shell.
-
-config BUSYBOX_CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION
-	bool "Username completion"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
-	help
-	  Enable username completion in shell.
-
-config BUSYBOX_CONFIG_FEATURE_SH_FANCY_PROMPT
-	bool "Fancy shell prompts"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
-	help
-	  Setting this option allows for prompts to use things like \w and
-	  \$ and also using escape codes.
+	  ::respawn:/bin/cttyhack /bin/sh

 endmenu
--- a/package/busybox/config/sysklogd/Config.in
+++ b/package/busybox/config/sysklogd/Config.in
@ -59,6 +59,7 @@ config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
 config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE
 	int "    Circular buffer size in Kbytes (minimum 4KB)"
 	default 16
+	range 4 2147483647
 	depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
 	help
 	  This option sets the size of the circular buffer
@ -88,8 +89,6 @@ config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING
 config BUSYBOX_CONFIG_KLOGD
 	bool "klogd"
 	default y
-	depends on BUSYBOX_CONFIG_SYSLOGD
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
 	  klogd is a utility which intercepts and logs all
 	  messages from the Linux kernel and sends the messages
--- a/package/busybox/config/util-linux/Config.in
+++ b/package/busybox/config/util-linux/Config.in
@ -127,7 +127,7 @@ config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
 	bool "Support SUN disklabels"
 	default n
- 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
 	  Enabling this option allows you to create or change SUN disklabels.
 	  Most people can safely leave this option disabled.
@ -181,7 +181,7 @@ config BUSYBOX_CONFIG_MKFS_MINIX
 	  this utility will do the job for you.

 comment "Minix filesystem support"
-    depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX

 config BUSYBOX_CONFIG_FEATURE_MINIX2
 	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
@ -269,46 +269,41 @@ config BUSYBOX_CONFIG_MDEV
 	bool "mdev"
 	default n
 	help
-	  mdev is a mini-udev implementation: call it with -s to populate
-	  /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to
-	  have it handle hotplug events afterwards.  Device names are taken
-	  from sysfs.
+	  mdev is a mini-udev implementation for dynamically creating device
+	  nodes in the /dev directory.
+
+	  For more information, please see docs/mdev.txt

 config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	bool "Support /etc/mdev.conf"
 	default n
 	depends on BUSYBOX_CONFIG_MDEV
 	help
-	  The mdev config file contains lines that look like:
+	  Add support for the mdev config file to control ownership and
+	  permissions of the device nodes.

-	    hd[a-z][0-9]* 0:3 660
-
-	  That's device name (with regex match), uid:gid, and permissions.
-
-	  Config file parsing stops on the first matching line.  If no config
-	  entry is matched, devices are created with default 0:0 660.  (Make
-	  the last line match .* to override this.)
+	  For more information, please see docs/mdev.txt

 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 	bool "Support command execution at device addition/removal"
 	default n
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	help
-	  This adds support for an optional field to /etc/mdev.conf, consisting
-	  of a special character and a command line to run after creating the
-	  corresponding device(s) and before removing, ala:
+	  This adds support for an optional field to /etc/mdev.conf for
+	  executing commands when devices are created/removed.

-	    hdc root:cdrom 660  *ln -s $MDEV cdrom
+	  For more information, please see docs/mdev.txt

-	  The $MDEV environment variable is set to the name of the device.
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+	bool "Support loading of firmwares"
+	default n
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  Some devices need to load firmware before they can be usable.

-	  The special characters and their meanings are:
-	    @ Run after creating the device.
-	    $ Run before removing the device.
-	    * Run both after creating and before removing the device.
-
-	  Commands are executed via system() so you need /bin/sh, meaning you
-	  probably want to select a default shell in the Shells menu.
+	  These devices will request userspace look up the files in
+	  /lib/firmware/ and if it exists, send it to the kernel for
+	  loading into the hardware.

 config BUSYBOX_CONFIG_MKSWAP
 	bool "mkswap"
@ -369,7 +364,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
 	bool "Support mounting NFS file systems"
 	default y
 	depends on BUSYBOX_CONFIG_MOUNT
-	depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
 	  Enable mounting of NFS file systems.
@ -495,7 +490,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 	  The umount command will also free that loopback device.

 	  You can still use the 'losetup' utility (to manually associate files
-          with loop devices) if you need to do something advanced, such as
+	  with loop devices) if you need to do something advanced, such as
 	  specify an offset or cryptographic options to the loopback device.
 	  (If you don't want umount to free the loop device, use "umount -D".)

--- a/package/busybox/patches/000-autoconf.patch
+++ b/package/busybox/patches/000-autoconf.patch
@ -1,12 +1,13 @@
-Index: busybox-1.4.2/applets/Kbuild
+Index: busybox-1.7.2/applets/Kbuild
 ===================================================================
--- busybox-1.4.2.orig/applets/Kbuild	2007-06-04 13:21:32.429046704 +0200
-+++ busybox-1.4.2/applets/Kbuild	2007-06-04 13:21:32.495036672 +0200
-@@ -10,6 +10,7 @@
+--- busybox-1.7.2.orig/applets/Kbuild	2007-10-04 14:30:23.484330073 +0200
+++ busybox-1.7.2/applets/Kbuild	2007-10-04 14:33:47.751970627 +0200
+@@ -20,6 +20,6 @@
+ HOSTCFLAGS_usage.o = -I$(srctree)/include
 
- # Generated file needs additional love
- 
-+applets/usage: include/autoconf.h
- applets/applets.o: include/usage_compressed.h
- 
- hostprogs-y += usage
+ applets/applets.o:          include/usage_compressed.h
+-applets/usage:              .config $(srctree)/applets/usage_compressed
+-include/usage_compressed.h: applets/usage $(srctree)/applets/usage_compressed
+applets/usage:              .config $(srctree)/applets/usage_compressed include/autoconf.h
+include/usage_compressed.h: applets/usage $(srctree)/applets/usage_compressed include/autoconf.h
+ 	$(call cmd,gen_usage_compressed)
--- a/package/busybox/patches/110-wget_getopt_fix.patch
+++ b/package/busybox/patches/110-wget_getopt_fix.patch
@ -1,13 +1,13 @@
-Index: busybox-1.4.2/networking/wget.c
+Index: busybox-1.7.2/networking/wget.c
 ===================================================================
--- busybox-1.4.2.orig/networking/wget.c	2007-06-04 13:21:32.408049896 +0200
-+++ busybox-1.4.2/networking/wget.c	2007-06-04 13:21:32.681008400 +0200
-@@ -136,7 +136,7 @@
- 		{ "directory-prefix", required_argument, NULL, 'P' },
- 		{ "proxy",            required_argument, NULL, 'Y' },
- 		{ "user-agent",       required_argument, NULL, 'U' },
-		{ "passive-ftp",      no_argument, NULL, 0xff },
-+		{ "passive-ftp",      no_argument, NULL, 0xfd },
- 		{ "header",           required_argument, NULL, 0xfe },
- 		{ 0, 0, 0, 0 }
- 	};
+--- busybox-1.7.2.orig/networking/wget.c	2007-10-04 14:35:17.057059834 +0200
+++ busybox-1.7.2/networking/wget.c	2007-10-04 14:35:27.013627222 +0200
+@@ -140,7 +140,7 @@
+ 		"directory-prefix\0" Required_argument "P"
+ 		"proxy\0"            Required_argument "Y"
+ 		"user-agent\0"       Required_argument "U"
+-		"passive-ftp\0"      No_argument       "\xff"
+		"passive-ftp\0"      No_argument       "\xfd"
+ 		"header\0"           Required_argument "\xfe"
+ 		;
+ 	applet_long_options = wget_longopts;
--- a/package/busybox/patches/130-drop_werror.patch
+++ b/package/busybox/patches/130-drop_werror.patch
@ -1,13 +0,0 @@
-Index: busybox-1.4.2/Makefile.flags
-===================================================================
--- busybox-1.4.2.orig/Makefile.flags	2007-06-04 13:21:32.387053088 +0200
-+++ busybox-1.4.2/Makefile.flags	2007-06-04 13:21:32.871979368 +0200
-@@ -16,7 +16,7 @@
- 	-D"BB_VER=KBUILD_STR($(BB_VER))" -DBB_BT=AUTOCONF_TIMESTAMP
- 
- CFLAGS += \
-	-Wall -Wstrict-prototypes -Wshadow -Werror -Wundef \
-+	-Wall -Wstrict-prototypes -Wshadow -Wundef \
- 	-funsigned-char -fno-builtin-strlen -finline-limit=0 -static-libgcc \
- 	-Os -falign-functions=1 -falign-jumps=1 -falign-loops=1 \
- 	-fomit-frame-pointer -ffunction-sections -fdata-sections
--- a/package/busybox/patches/243-udhcpc_changed_ifindex.patch
+++ b/package/busybox/patches/243-udhcpc_changed_ifindex.patch
@ -1,9 +1,9 @@
-Index: busybox-1.4.2/networking/udhcp/dhcpc.c
+Index: busybox-1.7.2/networking/udhcp/dhcpc.c
 ===================================================================
--- busybox-1.4.2.orig/networking/udhcp/dhcpc.c	2007-07-18 10:07:20.161035443 +0200
-+++ busybox-1.4.2/networking/udhcp/dhcpc.c	2007-07-18 10:09:15.515609124 +0200
-@@ -273,6 +273,12 @@
- 		tv.tv_sec = timeout - uptime();
+--- busybox-1.7.2.orig/networking/udhcp/dhcpc.c	2007-10-04 14:36:41.521873204 +0200
+++ busybox-1.7.2/networking/udhcp/dhcpc.c	2007-10-04 14:38:28.231954268 +0200
+@@ -309,6 +309,12 @@
+  jump_in:
 		tv.tv_usec = 0;
 
 +		/* When running on a bridge, the ifindex may have changed (e.g. if
@ -12,6 +12,6 @@ Index: busybox-1.4.2/networking/udhcp/dhcpc.c
 +		 * Workaround: refresh it here before processing the next packet */
 +		read_interface(client_config.interface, &client_config.ifindex, NULL, client_config.arp);
 +
- 		if (listen_mode != LISTEN_NONE && fd < 0) {
+ 		if (listen_mode != LISTEN_NONE && sockfd < 0) {
 			if (listen_mode == LISTEN_KERNEL)
- 				fd = listen_socket(INADDR_ANY, CLIENT_PORT, client_config.interface);
+ 				sockfd = listen_socket(/*INADDR_ANY,*/ CLIENT_PORT, client_config.interface);
--- a/package/busybox/patches/250-ash_export-n.patch
+++ b/package/busybox/patches/250-ash_export-n.patch
@ -1,37 +1,37 @@
-Index: busybox-1.4.2/shell/ash.c
+Index: busybox-1.7.2/shell/ash.c
 ===================================================================
--- busybox-1.4.2.orig/shell/ash.c	2007-06-04 13:21:32.248074216 +0200
-+++ busybox-1.4.2/shell/ash.c	2007-06-04 13:21:34.000807760 +0200
-@@ -12237,9 +12237,18 @@
+--- busybox-1.7.2.orig/shell/ash.c	2007-09-03 13:48:38.000000000 +0200
+++ busybox-1.7.2/shell/ash.c	2007-10-04 14:47:41.607489342 +0200
+@@ -11310,8 +11310,18 @@
 	const char *p;
 	char **aptr;
 	int flag = argv[0][0] == 'r'? VREADONLY : VEXPORT;
 +	int mask = ~0;
- 	int notp;
+	int nopt;
 
-	notp = nextopt("p") - 'p';
-+	while ((notp = nextopt("np"))) {
-+		if (notp == 'n') {
+-	if (nextopt("p") != 'p') {
+	while ((nopt = nextopt("np"))) {
+		if (nopt == 'n') {
 +				mask = ~flag;
 +		} else { /* p */
 +			break;
 +		}
 +	}
 +
-+	notp -= 'p';
- 	if (notp && ((name = *(aptr = argptr)))) {
- 		do {
- 			if ((p = strchr(name, '=')) != NULL) {
-@@ -12247,10 +12256,11 @@
- 			} else {
- 				if ((vp = *findvar(hashvar(name), name))) {
- 					vp->flags |= flag;
-+					vp->flags &= mask;
- 					continue;
+	if (nopt != 'p') {
+ 		aptr = argptr;
+ 		name = *aptr;
+ 		if (name) {
+@@ -11323,10 +11333,11 @@
+ 					vp = *findvar(hashvar(name), name);
+ 					if (vp) {
+ 						vp->flags |= flag;
+						vp->flags &= mask;
+ 						continue;
+ 					}
 				}
- 			}
-			setvar(name, p, flag);
-+			setvar(name, p, flag & mask);
- 		} while ((name = *++aptr) != NULL);
- 	} else {
- 		showvars(argv[0], flag, 0);
+-				setvar(name, p, flag);
+				setvar(name, p, flag & mask);
+ 			} while ((name = *++aptr) != NULL);
+ 			return 0;
+ 		}
--- a/package/busybox/patches/260-broadcast_plus.patch
+++ b/package/busybox/patches/260-broadcast_plus.patch
@ -1,29 +0,0 @@
-Index: busybox-1.4.2/networking/ifconfig.c
-===================================================================
--- busybox-1.4.2.orig/networking/ifconfig.c	2007-06-29 02:03:17.046772952 +0200
-+++ busybox-1.4.2/networking/ifconfig.c	2007-06-29 02:03:49.938772608 +0200
-@@ -376,18 +376,18 @@
- #endif
- 						sai.sin_family = AF_INET;
- 						sai.sin_port = 0;
-						if (!strcmp(host, bb_str_default)) {
-							/* Default is special, meaning 0.0.0.0. */
-							sai.sin_addr.s_addr = INADDR_ANY;
-						}
- #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
-						else if ((host[0] == '+' && !host[1]) && (mask & A_BROADCAST)
-+						if ((host[0] == '+' && !host[1]) && (mask & A_BROADCAST)
- 						 && (did_flags & (A_NETMASK|A_HOSTNAME)) == (A_NETMASK|A_HOSTNAME)
- 						) {
- 							/* + is special, meaning broadcast is derived. */
- 							sai.sin_addr.s_addr = (~sai_netmask) | (sai_hostname & sai_netmask);
-						}
-+						} else
- #endif
-+						if (!strcmp(host, bb_str_default)) {
-+							/* Default is special, meaning 0.0.0.0. */
-+							sai.sin_addr.s_addr = INADDR_ANY;
-+						}
- #if ENABLE_FEATURE_IPV6
- 						else if (inet_pton(AF_INET6, host, &sai6.sin6_addr) > 0) {
- 							int sockfd6;
--- a/package/busybox/patches/270-ash_performance.patch
+++ b/package/busybox/patches/270-ash_performance.patch
@ -1,30 +0,0 @@
-Index: busybox-1.4.2/shell/ash.c
-===================================================================
--- busybox-1.4.2.orig/shell/ash.c	2007-07-01 05:33:08.371737750 +0200
-+++ busybox-1.4.2/shell/ash.c	2007-07-01 05:33:11.703946000 +0200
-@@ -3957,12 +3957,6 @@
- 	}
- #endif
- 
-	if (is_safe_applet(name)) {
-		entry->cmdtype = CMDNORMAL;
-		entry->u.index = -1;
-		return;
-	}
-
- 	updatetbl = (path == pathval());
- 	if (!updatetbl) {
- 		act |= DO_ALTPATH;
-@@ -4074,6 +4068,12 @@
- 		goto success;
- 	}
- 
-+	if (is_safe_applet(name)) {
-+		entry->cmdtype = CMDNORMAL;
-+		entry->u.index = -1;
-+		return;
-+	}
-+
- 	/* We failed.  If there was an entry for this command, delete it */
- 	if (cmdp && updatetbl)
- 		delete_cmd_entry();
--- a/package/busybox/patches/280-printf.patch
+++ b/package/busybox/patches/280-printf.patch
@ -1,18 +0,0 @@
-Index: busybox-1.4.2/coreutils/printf.c
-===================================================================
--- busybox-1.4.2.orig/coreutils/printf.c	2007-07-09 03:00:31.808788500 +0200
-+++ busybox-1.4.2/coreutils/printf.c	2007-07-09 03:00:42.257441500 +0200
-@@ -60,11 +60,11 @@
- 
- static void conv_strtoul(char *arg, void *result)
- {
-	*(unsigned long*)result = bb_strtoul(arg, NULL, 10);
-+	*(unsigned long*)result = bb_strtoul(arg, NULL, 0);
- }
- static void conv_strtol(char *arg, void *result)
- {
-	*(long*)result = bb_strtol(arg, NULL, 10);
-+	*(long*)result = bb_strtol(arg, NULL, 0);
- }
- static void conv_strtod(char *arg, void *result)
- {
--- a/package/busybox/patches/310-passwd_access.patch
+++ b/package/busybox/patches/310-passwd_access.patch
@ -1,19 +1,19 @@

 	Copyright (C) 2006 OpenWrt.org

-Index: busybox-1.4.2/networking/httpd.c
+Index: busybox-1.7.2/networking/httpd.c
 ===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:32.190083032 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:34.401746808 +0200
-@@ -1402,12 +1402,26 @@
+--- busybox-1.7.2.orig/networking/httpd.c	2007-09-30 01:54:12.000000000 +0200
+++ busybox-1.7.2/networking/httpd.c	2007-10-04 14:59:20.287304836 +0200
+@@ -1527,12 +1527,26 @@
 			if (ENABLE_FEATURE_HTTPD_AUTH_MD5) {
 				char *cipher;
 				char *pp;
 +				char *ppnew = NULL;
 +				struct passwd *pwd = NULL;
 
- 				if (strncmp(p, request, u-request) != 0) {
- 					/* user uncompared */
+ 				if (strncmp(p, request, u - request) != 0) {
+ 					/* user doesn't match */
 					continue;
 				}
 				pp = strchr(p, ':');
@ -29,10 +29,10 @@ Index: busybox-1.4.2/networking/httpd.c
 +					strcpy(ppnew + 1, pwd->pw_passwd);
 +					pp = ppnew;
 +				}
- 				if (pp && pp[1] == '$' && pp[2] == '1' &&
- 						pp[3] == '$' && pp[4]) {
- 					pp++;
-@@ -1417,6 +1431,10 @@
+ 				if (pp && pp[1] == '$' && pp[2] == '1'
+ 				 && pp[3] == '$' && pp[4]
+ 				) {
+@@ -1543,6 +1557,10 @@
 					/* unauthorized */
 					continue;
 				}
--- a/package/busybox/patches/330-httpd_user_agent.patch
+++ b/package/busybox/patches/330-httpd_user_agent.patch
@ -1,29 +0,0 @@
-Index: busybox-1.4.2/networking/httpd.c
-===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:34.401746808 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:34.588718384 +0200
-@@ -137,6 +137,7 @@
- 	const char *query;
- 
- 	USE_FEATURE_HTTPD_CGI(char *referer;)
-+	USE_FEATURE_HTTPD_CGI(char *user_agent;)
- 
- 	const char *configFile;
- 
-@@ -1066,6 +1067,7 @@
- 			if (cp) *cp = '\0'; /* delete :PORT */
- 			setenv1("REMOTE_ADDR", p);
- 		}
-+ 		setenv1("HTTP_USER_AGENT", config->user_agent);
- #if ENABLE_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- 		setenv_long("REMOTE_PORT", config->port);
- #endif
-@@ -1647,6 +1649,8 @@
- 					content_type = strdup(skip_whitespace(buf + sizeof("Content-Type:")-1));
- 				} else if ((STRNCASECMP(buf, "Referer:") == 0)) {
- 					config->referer = strdup(skip_whitespace(buf + sizeof("Referer:")-1));
-+				} else if ((STRNCASECMP(buf, "User-Agent:") == 0)) {
-+					config->user_agent = strdup(skip_whitespace(buf + sizeof("User-Agent:")-1));
- 				}
- #endif
- 
--- a/package/busybox/patches/350-httpd_redir.patch
+++ b/package/busybox/patches/350-httpd_redir.patch
@ -1,69 +1,76 @@
-Index: busybox-1.4.2/include/usage.h
+Index: busybox-1.7.2/include/usage.h
 ===================================================================
--- busybox-1.4.2.orig/include/usage.h	2007-06-04 13:21:32.103096256 +0200
-+++ busybox-1.4.2/include/usage.h	2007-06-04 13:21:35.005655000 +0200
-@@ -1257,7 +1257,8 @@
- 	USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \
+--- busybox-1.7.2.orig/include/usage.h	2007-10-04 17:12:35.230910708 +0200
+++ busybox-1.7.2/include/usage.h	2007-10-04 17:32:12.994027602 +0200
+@@ -1350,7 +1350,8 @@
+ 	USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \
 	USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \
        " [-h home]" \
-       " [-d/-e <string>]"
-+       " [-d/-e <string>]" \
+-       " [-d/-e string]"
+       " [-d/-e string]" \
 +       " [-R <path> [-H <host>]]"
 #define httpd_full_usage \
-        "Listen for incoming http server requests" \
-        "\n\nOptions:\n" \
-@@ -1273,7 +1274,9 @@
-        "	-m PASS		Crypt PASS with md5 algorithm\n") \
-        "	-h HOME		Specifies http HOME directory (default ./)\n" \
-        "	-e STRING	HTML encode STRING\n" \
-       "	-d STRING	URL decode STRING"
-+       "	-d STRING	URL decode STRING\n" \
-+       "	-R PATH 	Redirect target path\n" \
-+       "	-H HOST 	Redirect target host"
+        "Listen for incoming HTTP requests" \
+        "\n\nOptions:" \
+@@ -1368,6 +1369,8 @@
+        "\n	-h HOME		Home directory (default .)" \
+        "\n	-e STRING	HTML encode STRING" \
+        "\n	-d STRING	URL decode STRING" \
+       "\n	-R PATH 	Redirect target path" \
+       "\n	-H HOST 	Redirect target host" \
 
 #define hwclock_trivial_usage \
-        "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
-Index: busybox-1.4.2/networking/httpd.c
+        "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
+Index: busybox-1.7.2/networking/httpd.c
 ===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:34.588718384 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:35.006654848 +0200
-@@ -140,6 +140,8 @@
- 	USE_FEATURE_HTTPD_CGI(char *user_agent;)
+--- busybox-1.7.2.orig/networking/httpd.c	2007-10-04 17:13:12.509035065 +0200
+++ busybox-1.7.2/networking/httpd.c	2007-10-04 17:32:33.711208213 +0200
+@@ -230,6 +230,8 @@
 
- 	const char *configFile;
-+	const char *redirectPath;
-+	const char *redirectHost;
+ 	const char *found_mime_type;
+ 	const char *found_moved_temporarily;
+	const char *redirect_path;
+	const char *redirect_host;
+ 	Htaccess_IP *ip_a_d;    /* config allow/deny lines */
 
- 	unsigned int rmt_ip;
- #if ENABLE_FEATURE_HTTPD_CGI || DEBUG
-@@ -880,8 +882,11 @@
+ 	USE_FEATURE_HTTPD_BASIC_AUTH(const char *g_realm;)
+@@ -264,6 +266,8 @@
+ #define home_httpd        (G.home_httpd       )
+ #define found_mime_type   (G.found_mime_type  )
+ #define found_moved_temporarily (G.found_moved_temporarily)
+#define redirect_path     (G.redirect_path    )
+#define redirect_host     (G.redirect_host    )
+ #define ContentLength     (G.ContentLength    )
+ #define last_mod          (G.last_mod         )
+ #define ip_a_d            (G.ip_a_d           )
+@@ -901,8 +905,11 @@
 	}
 #endif
 	if (responseNum == HTTP_MOVED_TEMPORARILY) {
-		len += sprintf(buf+len, "Location: %s/%s%s\r\n",
-+		len += sprintf(buf+len, "Location: %s%s%s%s%s%s\r\n",
-+				(config->redirectHost ? "http://" : ""),
-+				(config->redirectHost ? config->redirectHost : ""),
- 				config->found_moved_temporarily,
-+				(config->redirectHost ? "" : "/"),
- 				(config->query ? "?" : ""),
- 				(config->query ? config->query : ""));
+-		len += sprintf(iobuf + len, "Location: %s/%s%s\r\n",
+		len += sprintf(iobuf + len, "Location: %s%s%s%s%s%s\r\n",
+				(redirect_host ? "http://" : ""),
+				(redirect_host ? redirect_host : ""),
+ 				found_moved_temporarily,
+				(redirect_host ? "" : "/"),
+ 				(g_query ? "?" : ""),
+ 				(g_query ? g_query : ""));
 	}
-@@ -1594,8 +1599,12 @@
- 		*++purl = '\0';       /* so keep last character */
- 		test = purl;          /* end ptr */
+@@ -1730,8 +1737,12 @@
+ 	*++urlp = '\0';       /* so keep last character */
+ 	tptr = urlp;          /* end ptr */
 
-+		/* redirect active */
-+		if (config->redirectPath && (strncmp(url, config->redirectPath, strlen(config->redirectPath)) != 0))
-+			config->found_moved_temporarily = config->redirectPath;
+	/* redirect active */
+	if (redirect_path && (strncmp(urlcopy, redirect_path, strlen(redirect_path)) != 0))
+		found_moved_temporarily = redirect_path;
 +
- 		/* If URL is directory, adding '/' */
-		if (test[-1] != '/') {
-+		if(!config->redirectPath && (test[-1] != '/')) {
- 			if (is_directory(url + 1, 1, &sb)) {
- 				config->found_moved_temporarily = url;
- 			}
-@@ -1897,7 +1906,9 @@
+ 	/* If URL is a directory, add '/' */
+-	if (tptr[-1] != '/') {
+	if (!redirect_path && (tptr[-1] != '/')) {
+ 		if (is_directory(urlcopy + 1, 1, &sb)) {
+ 			found_moved_temporarily = urlcopy;
+ 		}
+@@ -2004,7 +2015,9 @@
 #endif
 
 enum {
@ -74,20 +81,18 @@ Index: busybox-1.4.2/networking/httpd.c
 	d_opt_decode_url,
 	h_opt_home_httpd,
 	USE_FEATURE_HTTPD_ENCODE_URL_STR(e_opt_encode_url,)
-@@ -1919,7 +1930,7 @@
- 	OPT_FOREGROUND  = 1 << p_opt_foreground,
- };
- 
-static const char httpd_opts[] = "c:d:h:"
-+static const char httpd_opts[] = "R:H:c:d:h:"
- 	USE_FEATURE_HTTPD_ENCODE_URL_STR("e:")
- 	USE_FEATURE_HTTPD_BASIC_AUTH("r:")
- 	USE_FEATURE_HTTPD_AUTH_MD5("m:")
-@@ -1951,6 +1962,7 @@
- 	config->ContentLength = -1;
- 
- 	opt = getopt32(argc, argv, httpd_opts,
-+			&(config->redirectPath), &(config->redirectHost),
- 			&(config->configFile), &url_for_decode, &home_httpd
+@@ -2053,12 +2066,13 @@
+ 	/* We do not "absolutize" path given by -h (home) opt.
+ 	 * If user gives relative path in -h, $SCRIPT_FILENAME can end up
+ 	 * relative too. */
+-	opt = getopt32(argv, "c:d:h:"
+	opt = getopt32(argv, "R:H:c:d:h:"
+ 			USE_FEATURE_HTTPD_ENCODE_URL_STR("e:")
+ 			USE_FEATURE_HTTPD_BASIC_AUTH("r:")
+ 			USE_FEATURE_HTTPD_AUTH_MD5("m:")
+ 			USE_FEATURE_HTTPD_SETUID("u:")
+ 			"p:ifv",
+			&redirect_path, &redirect_host,
+ 			&configFile, &url_for_decode, &home_httpd
 			USE_FEATURE_HTTPD_ENCODE_URL_STR(, &url_for_encode)
- 			USE_FEATURE_HTTPD_BASIC_AUTH(, &(config->realm))
+ 			USE_FEATURE_HTTPD_BASIC_AUTH(, &g_realm)
--- a/package/busybox/patches/360-awk_multi_f.patch
+++ b/package/busybox/patches/360-awk_multi_f.patch
@ -0,0 +1,72 @@
+Index: busybox-1.7.2/editors/awk.c
+===================================================================
+--- busybox-1.7.2.orig/editors/awk.c	2007-10-04 19:57:46.859742242 +0200
+++ busybox-1.7.2/editors/awk.c	2007-10-05 02:20:02.910793305 +0200
+@@ -2757,6 +2757,7 @@
+ {
+ 	unsigned opt;
+ 	char *opt_F, *opt_W;
+	llist_t *opt_f = NULL;
+ 	llist_t *opt_v = NULL;
+ 	int i, j, flen;
+ 	var *v;
+@@ -2816,8 +2817,8 @@
+ 			*s1 = '=';
+ 		}
+ 	}
+-	opt_complementary = "v::";
+-	opt = getopt32(argv, "F:v:f:W:", &opt_F, &opt_v, &g_progname, &opt_W);
+	opt_complementary = "v::f::";
+	opt = getopt32(argv, "F:v:f:W:", &opt_F, &opt_v, &opt_f, &opt_W);
+ 	argv += optind;
+ 	argc -= optind;
+ 	if (opt & 0x1)
+@@ -2826,25 +2827,31 @@
+ 		if (!is_assignment(llist_pop(&opt_v)))
+ 			bb_show_usage();
+ 	}
+-	if (opt & 0x4) { // -f
+-		char *s = s; /* die, gcc, die */
+-		FILE *from_file = afopen(g_progname, "r");
+-		/* one byte is reserved for some trick in next_token */
+-		if (fseek(from_file, 0, SEEK_END) == 0) {
+-			flen = ftell(from_file);
+-			s = xmalloc(flen + 4);
+-			fseek(from_file, 0, SEEK_SET);
+-			i = 1 + fread(s + 1, 1, flen, from_file);
+-		} else {
+-			for (i = j = 1; j > 0; i += j) {
+-				s = xrealloc(s, i + 4096);
+-				j = fread(s + i, 1, 4094, from_file);
+	if (opt_f != NULL) { // -f
+		while (opt_f != NULL) {
+			char *s = NULL;
+			FILE *from_file;
+
+			g_progname = opt_f->data;
+			from_file = afopen(g_progname, "r");
+			/* one byte is reserved for some trick in next_token */
+			if (fseek(from_file, 0, SEEK_END) == 0) {
+				flen = ftell(from_file);
+				s = xmalloc(flen + 4);
+				fseek(from_file, 0, SEEK_SET);
+				i = 1 + fread(s + 1, 1, flen, from_file);
+			} else {
+				for (i = j = 1; j > 0; i += j) {
+					s = xrealloc(s, i + 4096);
+					j = fread(s + i, 1, 4094, from_file);
+				}
+ 			}
+			s[i] = '\0';
+			fclose(from_file);
+			parse_program(s + 1);
+			free(s);
+			opt_f = opt_f->link;
+ 		}
+-		s[i] = '\0';
+-		fclose(from_file);
+-		parse_program(s + 1);
+-		free(s);
+ 	} else { // no -f: take program from 1st parameter
+ 		if (!argc)
+ 			bb_show_usage();
--- a/package/busybox/patches/400-revert_awk_getopt.patch
+++ b/package/busybox/patches/400-revert_awk_getopt.patch
@ -1,103 +0,0 @@
-Index: busybox-1.4.2/editors/awk.c
-===================================================================
--- busybox-1.4.2.orig/editors/awk.c	2007-06-15 23:43:26.460690280 +0200
-+++ busybox-1.4.2/editors/awk.c	2007-06-15 23:45:26.283474448 +0200
-@@ -2639,14 +2639,13 @@
- 
- int awk_main(int argc, char **argv)
- {
-	unsigned opt;
-	char *opt_F, *opt_v, *opt_W;
- 	int i, j, flen;
- 	var *v;
- 	var tv;
- 	char **envp;
- 	char *vnames = (char *)vNames; /* cheat */
- 	char *vvalues = (char *)vValues;
-+	int c;
- 
- 	/* Undo busybox.c, or else strtod may eat ','! This breaks parsing:
- 	 * $1,$2 == '$1,' '$2', NOT '$1' ',' '$2' */
-@@ -2694,40 +2693,56 @@
- 		free(s);
- 	}
- 
-	opt = getopt32(argc, argv, "F:v:f:W:", &opt_F, &opt_v, &programname, &opt_W);
-	argv += optind;
-	argc -= optind;
-	if (opt & 0x1) setvar_s(V[FS], opt_F); // -F
-	if (opt & 0x2) if (!is_assignment(opt_v)) bb_show_usage(); // -v
-	if (opt & 0x4) { // -f
-		char *s = s; /* die, gcc, die */
-		FILE *from_file = afopen(programname, "r");
-		/* one byte is reserved for some trick in next_token */
-		if (fseek(from_file, 0, SEEK_END) == 0) {
-			flen = ftell(from_file);
-			s = xmalloc(flen + 4);
-			fseek(from_file, 0, SEEK_SET);
-			i = 1 + fread(s + 1, 1, flen, from_file);
-		} else {
-			for (i = j = 1; j > 0; i += j) {
-				s = xrealloc(s, i + 4096);
-				j = fread(s + i, 1, 4094, from_file);
-+	programname = NULL;
-+	while((c = getopt(argc, argv, "F:v:f:W:")) != EOF) {
-+		switch (c) {
-+			case 'F':
-+				setvar_s(V[FS], optarg);
-+				break;
-+			case 'v':
-+				if (! is_assignment(optarg))
-+					bb_show_usage();
-+				break;
-+			case 'f': {
-+				FILE *F = afopen(programname = optarg, "r");
-+				char *s = NULL;
-+				/* one byte is reserved for some trick in next_token */
-+				if (fseek(F, 0, SEEK_END) == 0) {
-+					flen = ftell(F);
-+					s = (char *)xmalloc(flen+4);
-+					fseek(F, 0, SEEK_SET);
-+					i = 1 + fread(s+1, 1, flen, F);
-+				} else {
-+					for (i=j=1; j>0; i+=j) {
-+						s = (char *)xrealloc(s, i+4096);
-+						j = fread(s+i, 1, 4094, F);
-+					}
-+				}
-+				s[i] = '\0';
-+				fclose(F);
-+				parse_program(s+1);
-+				free(s);
-+				break;
- 			}
-+			case 'W':
-+				bb_error_msg("Warning: unrecognized option '-W %s' ignored\n", optarg);
-+				break;
-+
-+			default:
-+				bb_show_usage();
- 		}
-		s[i] = '\0';
-		fclose(from_file);
-		parse_program(s + 1);
-		free(s);
-	} else { // no -f: take program from 1st parameter
-+	}
-+	argc -= optind;
-+	argv += optind;
-+
-+	if (!programname) {
- 		if (!argc)
- 			bb_show_usage();
- 		programname = "cmd. line";
- 		parse_program(*argv++);
- 		argc--;
- 	}
-	if (opt & 0x8) // -W
-		bb_error_msg("warning: unrecognized option '-W %s' ignored", opt_W);
-
-+	
- 	/* fill in ARGV array */
- 	setvar_i(V[ARGC], argc + 1);
- 	setari_u(V[ARGV], 0, "awk");
--- a/package/busybox/patches/401-darwin_includes.patch
+++ b/package/busybox/patches/401-darwin_includes.patch
@ -1,8 +1,8 @@
-Index: busybox-1.4.2/include/platform.h
+Index: busybox-1.7.2/include/platform.h
 ===================================================================
--- busybox-1.4.2.orig/include/platform.h	2007-06-04 13:21:32.055103552 +0200
-+++ busybox-1.4.2/include/platform.h	2007-06-04 13:21:35.387596936 +0200
-@@ -128,9 +128,11 @@
+--- busybox-1.7.2.orig/include/platform.h	2007-09-03 13:48:46.000000000 +0200
+++ busybox-1.7.2/include/platform.h	2007-10-04 15:20:58.301274440 +0200
+@@ -137,9 +137,11 @@
 # include <netinet/in.h>
 #endif
 
@ -14,30 +14,20 @@ Index: busybox-1.4.2/include/platform.h
 
 /* ---- Compiler dependent settings ------------------------- */
 #if (defined __digital__ && defined __unix__)
-@@ -161,7 +163,7 @@
+@@ -179,7 +181,7 @@
 #define HAVE_STDINT_H
 #else
 /* Largest integral types.  */
 -#if __BIG_ENDIAN__
 +#if __BIG_ENDIAN__ && !__APPLE__
- typedef long int                intmax_t;
- typedef unsigned long int       uintmax_t;
+ typedef long                intmax_t;
+ typedef unsigned long       uintmax_t;
 #else
-Index: busybox-1.4.2/include/libbb.h
+Index: busybox-1.7.2/include/libbb.h
 ===================================================================
--- busybox-1.4.2.orig/include/libbb.h	2007-06-04 13:21:32.062102488 +0200
-+++ busybox-1.4.2/include/libbb.h	2007-06-04 13:21:35.388596784 +0200
-@@ -17,7 +17,9 @@
- #include <errno.h>
- #include <fcntl.h>
- #include <inttypes.h>
-+#ifndef __APPLE__
- #include <malloc.h>
-+#endif
- #include <netdb.h>
- #include <setjmp.h>
- #include <signal.h>
-@@ -30,7 +32,9 @@
+--- busybox-1.7.2.orig/include/libbb.h	2007-09-16 20:48:10.000000000 +0200
+++ busybox-1.7.2/include/libbb.h	2007-10-04 15:20:22.275221430 +0200
+@@ -31,7 +31,9 @@
 #include <sys/mman.h>
 #include <sys/socket.h>
 #include <sys/stat.h>
--- a/package/busybox/patches/410-httpd_cgi_headers.patch
+++ b/package/busybox/patches/410-httpd_cgi_headers.patch
@ -1,26 +1,18 @@
-Index: busybox-1.4.2/networking/httpd.c
+Index: busybox-1.7.2/networking/httpd.c
 ===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:35.006654848 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:35.585566840 +0200
-@@ -1231,7 +1231,7 @@
- 				 * "chopped up into small chunks" syndrome here */
- 				rbuf[count] = '\0';
- 				/* check to see if the user script added headers */
-#define HTTP_200 "HTTP/1.0 200 OK\r\n\r\n"
-+#define HTTP_200 "HTTP/1.0 200 OK\r\n"
- 				if (memcmp(rbuf, HTTP_200, 4) != 0) {
- 					/* there is no "HTTP", do it ourself */
- 					full_write(s, HTTP_200, sizeof(HTTP_200)-1);
-@@ -1242,9 +1242,9 @@
- 				 * echo -en "Location: http://www.busybox.net\r\n"
- 				 * echo -en "\r\n"
- 				 */
-				//if (!strstr(rbuf, "ontent-")) {
-				//	full_write(s, "Content-type: text/plain\r\n\r\n", 28);
-				//}
-+				if (!strstr(rbuf, "ontent-")) {
-+					full_write(s, "Content-type: text/plain\r\n\r\n", 28);
-+				}
- 				firstLine = 0;
- 			}
- 			if (full_write(s, rbuf, count) != count)
+--- busybox-1.7.2.orig/networking/httpd.c	2007-10-04 15:06:51.993046080 +0200
+++ busybox-1.7.2/networking/httpd.c	2007-10-04 15:25:10.815664410 +0200
+@@ -1314,10 +1314,10 @@
+ 						if (full_write(1, HTTP_200, sizeof(HTTP_200)-1) != sizeof(HTTP_200)-1)
+ 							break;
+ 					}
+-					/* Commented out:
+-					if (!strstr(rbuf, "ontent-")) {
+-						full_write(s, "Content-type: text/plain\r\n\r\n", 28);
+					if (!strstr(rbuf, "ontent-") && !strstr(rbuf, "ocation:")) {
+						full_write(1, "Content-type: text/plain\r\n\r\n", 28);
+ 					}
+					/* Previously commented out:
+ 					 * Counter-example of valid CGI without Content-type:
+ 					 * echo -en "HTTP/1.0 302 Found\r\n"
+ 					 * echo -en "Location: http://www.busybox.net\r\n"
--- a/package/busybox/patches/420-httpd_sendcgi_fix.patch
+++ b/package/busybox/patches/420-httpd_sendcgi_fix.patch
@ -1,18 +0,0 @@
-Index: busybox-1.4.2/networking/httpd.c
-===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:35.585566840 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:35.775537960 +0200
-@@ -1218,9 +1218,10 @@
- #if PIPESIZE >= MAX_MEMORY_BUFF
- # error "PIPESIZE >= MAX_MEMORY_BUFF"
- #endif
-			/* NB: was safe_read. If it *has to be* safe_read, */
-			/* please explain why in this comment... */
-			count = full_read(inFd, rbuf, PIPESIZE);
-+			/* reverted back to safe_read, otherwise httpd may block if the */
-+			/* cgi-script outputs page date before it has fully received all */
-+			/* (eg POST) data */
-+			count = safe_read(inFd, rbuf, PIPESIZE);
- 			if (count == 0)
- 				break;  /* closed */
- 			if (count < 0)
--- a/package/busybox/patches/440-httpd_chdir.patch
+++ b/package/busybox/patches/440-httpd_chdir.patch
@ -1,29 +1,12 @@
-Index: busybox-1.4.2/networking/httpd.c
+Index: busybox-1.7.2/networking/httpd.c
 ===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-04 13:21:35.775537960 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-04 13:21:36.144481872 +0200
-@@ -102,6 +102,7 @@
- static const char default_path_httpd_conf[] = "/etc";
- static const char httpd_conf[] = "httpd.conf";
- static const char home[] = "./";
-+static const char *home_httpd = home;
- 
- #define TIMEOUT 60
- 
-@@ -1505,6 +1506,8 @@
+--- busybox-1.7.2.orig/networking/httpd.c	2007-10-04 15:25:10.815664410 +0200
+++ busybox-1.7.2/networking/httpd.c	2007-10-04 15:31:22.936870392 +0200
+@@ -1616,6 +1616,7 @@
 #if ENABLE_FEATURE_HTTPD_BASIC_AUTH
 	int credentials = -1;  /* if not required this is Ok */
 #endif
-+	
 +	xchdir(home_httpd);
 
- 	sa.sa_handler = handle_sigalrm;
- 	sigemptyset(&sa.sa_mask);
-@@ -1942,7 +1945,6 @@
- int httpd_main(int argc, char *argv[])
- {
- 	unsigned opt;
-	const char *home_httpd = home;
- 	char *url_for_decode;
- 	USE_FEATURE_HTTPD_ENCODE_URL_STR(const char *url_for_encode;)
- 	const char *s_port;
+ 	/* Allocation of iobuf is postponed until now
+ 	 * (IOW, server process doesn't need to waste 8k) */
--- a/package/busybox/patches/440-usage_compressed_fix.patch
+++ b/package/busybox/patches/440-usage_compressed_fix.patch
@ -1,12 +0,0 @@
-Index: busybox-1.4.2/applets/usage_compressed
-===================================================================
--- busybox-1.4.2.orig/applets/usage_compressed	2007-06-04 13:21:31.952119208 +0200
-+++ busybox-1.4.2/applets/usage_compressed	2007-06-04 13:21:36.331453448 +0200
-@@ -14,6 +14,6 @@
- 
- echo 'static const char packed_usage[] = '
- "$loc/usage" | bzip2 -1 | od -v -t x1 \
-| $SED -e 's/^[^ ]*//' -e 's/ \(..\)/\\x\1/g' -e 's/^\(.*\)$/"\1"/'
-+| $SED -e 's/^[^ ]*//' -e 's/ \([a-f0-9][a-f0-9]\)/\\x\1/g' -e 's/^\(.*\)$/"\1"/'
- echo ';'
- echo '#define SIZEOF_usage_messages' `expr 0 + $sz`
--- a/package/busybox/patches/450-truncated_ping_results.patch
+++ b/package/busybox/patches/450-truncated_ping_results.patch
@ -1,33 +0,0 @@
-Index: busybox-1.4.2/networking/ping.c
-===================================================================
--- busybox-1.4.2.orig/networking/ping.c	2007-06-04 13:21:31.931122400 +0200
-+++ busybox-1.4.2/networking/ping.c	2007-06-04 13:21:36.518425024 +0200
-@@ -70,7 +70,7 @@
- 	struct sockaddr_in pingaddr;
- 	struct icmp *pkt;
- 	int pingsock, c;
-	char packet[DEFDATALEN + MAXIPLEN + MAXICMPLEN];
-+	char packet[datalen + ICMP_MINLEN + MAXIPLEN + MAXICMPLEN];
- 
- 	pingsock = create_icmp_socket();
- 
-@@ -86,7 +86,7 @@
- 	pkt->icmp_type = ICMP_ECHO;
- 	pkt->icmp_cksum = in_cksum((unsigned short *) pkt, sizeof(packet));
- 
-	c = sendto(pingsock, packet, DEFDATALEN + ICMP_MINLEN, 0,
-+	c = sendto(pingsock, packet, datalen + ICMP_MINLEN, 0,
- 			   (struct sockaddr *) &pingaddr, sizeof(struct sockaddr_in));
- 
- 	if (c < 0) {
-@@ -274,6 +274,10 @@
- 		++nreceived;
- 		tp = (struct timeval *) icmppkt->icmp_data;
- 
-+		/* If packet is too short, results will be truncated */
-+		if (sz < (ICMP_MINLEN + sizeof(tv.tv_sec) + sizeof(tv.tv_usec)))
-+			return;
-+
- 		if ((tv.tv_usec -= tp->tv_usec) < 0) {
- 			--tv.tv_sec;
- 			tv.tv_usec += 1000000;
--- a/package/busybox/patches/450-usage_compressed_fix.patch
+++ b/package/busybox/patches/450-usage_compressed_fix.patch
@ -0,0 +1,12 @@
+Index: busybox-1.7.2/applets/usage_compressed
+===================================================================
+--- busybox-1.7.2.orig/applets/usage_compressed	2007-09-03 13:48:55.000000000 +0200
+++ busybox-1.7.2/applets/usage_compressed	2007-10-04 15:32:54.578092727 +0200
+@@ -14,6 +14,6 @@
+ 
+ echo 'static const char packed_usage[] ALIGN1 = '
+ "$loc/usage" | bzip2 -1 | od -v -t x1 \
+-| $SED -e 's/^[^ ]*//' -e 's/  *\(..\)/\\x\1/g' -e 's/^\(.*\)$/"\1"/'
+| $SED -e 's/^[^ ]*//' -e 's/  *\([a-f0-9][a-f0-9]\)/\\x\1/g' -e 's/^\(.*\)$/"\1"/'
+ echo ';'
+ echo '#define SIZEOF_usage_messages' `expr 0 + $sz`
--- a/package/busybox/patches/460-httpd_cgi_bin.patch
+++ b/package/busybox/patches/460-httpd_cgi_bin.patch
@ -1,15 +0,0 @@
-Index: busybox-1.4.2/networking/httpd.c
-===================================================================
--- busybox-1.4.2.orig/networking/httpd.c	2007-06-21 18:12:06.791080496 +0200
-+++ busybox-1.4.2/networking/httpd.c	2007-06-21 18:14:48.914434000 +0200
-@@ -1715,8 +1715,8 @@
- 		test = url + 1;      /* skip first '/' */
- 
- #if ENABLE_FEATURE_HTTPD_CGI
-		if (strncmp(test, "cgi-bin", 7) == 0) {
-			if (test[7] == '/' && test[8] == 0)
-+		if (strncmp(test, "cgi-bin/", 8) == 0) {
-+			if (test[8] == 0)
- 				goto FORBIDDEN;     /* protect listing cgi-bin/ */
- 			sendCgi(url, prequest, length, cookie, content_type);
- 			break;
--- a/package/busybox/patches/460-truncated_ping_results.patch
+++ b/package/busybox/patches/460-truncated_ping_results.patch
@ -0,0 +1,40 @@
+Index: busybox-1.7.2/networking/ping.c
+===================================================================
+--- busybox-1.7.2.orig/networking/ping.c	2007-09-03 13:48:27.000000000 +0200
+++ busybox-1.7.2/networking/ping.c	2007-10-04 15:38:15.424376713 +0200
+@@ -91,7 +91,7 @@
+ 	struct sockaddr_in pingaddr;
+ 	struct icmp *pkt;
+ 	int pingsock, c;
+-	char packet[DEFDATALEN + MAXIPLEN + MAXICMPLEN];
+	char packet[datalen + ICMP_MINLEN + MAXIPLEN + MAXICMPLEN];
+ 
+ 	pingsock = create_icmp_socket();
+ 	pingaddr = lsa->sin;
+@@ -101,7 +101,7 @@
+ 	pkt->icmp_type = ICMP_ECHO;
+ 	pkt->icmp_cksum = in_cksum((unsigned short *) pkt, sizeof(packet));
+ 
+-	c = xsendto(pingsock, packet, DEFDATALEN + ICMP_MINLEN,
+	c = xsendto(pingsock, packet, datalen + ICMP_MINLEN,
+ 			   (struct sockaddr *) &pingaddr, sizeof(pingaddr));
+ 
+ 	/* listen for replies */
+@@ -135,7 +135,7 @@
+ 	struct icmp6_hdr *pkt;
+ 	int pingsock, c;
+ 	int sockopt;
+-	char packet[DEFDATALEN + MAXIPLEN + MAXICMPLEN];
+	char packet[datalen + ICMP_MINLEN + MAXIPLEN + MAXICMPLEN];
+ 
+ 	pingsock = create_icmp6_socket();
+ 	pingaddr = lsa->sin6;
+@@ -147,7 +147,7 @@
+ 	sockopt = offsetof(struct icmp6_hdr, icmp6_cksum);
+ 	setsockopt(pingsock, SOL_RAW, IPV6_CHECKSUM, &sockopt, sizeof(sockopt));
+ 
+-	c = xsendto(pingsock, packet, DEFDATALEN + sizeof (struct icmp6_hdr),
+	c = xsendto(pingsock, packet, datalen + sizeof (struct icmp6_hdr),
+ 			   (struct sockaddr *) &pingaddr, sizeof(pingaddr));
+ 
+ 	/* listen for replies */
--- a/package/busybox/patches/470-insmod_search.patch
+++ b/package/busybox/patches/470-insmod_search.patch
@ -0,0 +1,488 @@
+Index: busybox-1.7.2/modutils/insmod.c
+===================================================================
+--- busybox-1.7.2.orig/modutils/insmod.c	2007-09-03 13:48:35.000000000 +0200
+++ busybox-1.7.2/modutils/insmod.c	2007-10-05 01:43:47.686834357 +0200
+@@ -61,19 +61,107 @@
+ #include "libbb.h"
+ #include <libgen.h>
+ #include <sys/utsname.h>
+#if ENABLE_FEATURE_2_6_MODULES
+#include <sys/mman.h>
+#include <asm/unistd.h>
+#include <sys/syscall.h>
+#endif
+ 
+ #if !ENABLE_FEATURE_2_4_MODULES && !ENABLE_FEATURE_2_6_MODULES
+ #undef ENABLE_FEATURE_2_4_MODULES
+ #define ENABLE_FEATURE_2_4_MODULES 1
+ #endif
+ 
+-#if !ENABLE_FEATURE_2_4_MODULES
+-#define insmod_ng_main insmod_main
+#if ENABLE_FEATURE_2_4_MODULES
+int insmod_main_24(int argc, char **argv);
+ #endif
+-
+ #if ENABLE_FEATURE_2_6_MODULES
+-extern int insmod_ng_main( int argc, char **argv);
+int insmod_main_26(int argc, char **argv);
+ #endif
+int insmod_main(int argc, char **argv);
+
+static char *g_filename = NULL;
+#define _PATH_MODULES	"/lib/modules"
+
+static int check_module_name_match(const char *filename, struct stat *statbuf,
+				   void *userdata, int depth)
+{
+	char *fullname = (char *) userdata;
+
+	if (fullname[0] == '\0')
+		return FALSE;
+	else {
+		char *tmp, *tmp1 = xstrdup(filename);
+		tmp = bb_get_last_path_component(tmp1);
+		if (strcmp(tmp, fullname) == 0) {
+			free(tmp1);
+			/* Stop searching if we find a match */
+			g_filename = xstrdup(filename);
+			return FALSE;
+		}
+		free(tmp1);
+	}
+	return TRUE;
+}
+
+static int find_module(char *filename)
+{
+	char *module_dir, real_module_dir[FILENAME_MAX];
+	int len, slen, ret = ENOENT, k_version;
+	struct utsname myuname;
+	const char *suffix;
+	struct stat st;
+
+	/* check the kernel version */
+	if ((uname(&myuname) != 0) || (myuname.release[0] != '2'))
+		return EINVAL;
+
+	k_version = myuname.release[2] - '0';
+#if ENABLE_FEATURE_2_4_MODULES
+	if (k_version <= 4)
+		suffix = ".o";
+	else
+#endif
+		suffix = ".ko";
+
+	len = strlen(filename);
+	slen = strlen(suffix);
+
+	/* check for suffix and absolute path first */
+	if ((len < slen + 2) || (strcmp(filename + len - slen, suffix) != 0)) {
+		filename = xasprintf("%s%s", filename, suffix);
+	} else {
+		filename = strdup(filename);
+		if ((stat(filename, &st) == 0) && S_ISREG(st.st_mode))
+			return 0;
+	}
+
+	/* next: scan /lib/modules/<release> */
+	/* Jump through hoops in case /lib/modules/`uname -r`
+	* is a symlink.  We do not want recursive_action to
+	* follow symlinks, but we do want to follow the
+	* /lib/modules/`uname -r` dir, So resolve it ourselves
+	* if it is a link... */
+	module_dir = concat_path_file(_PATH_MODULES, myuname.release);
+	if (realpath(module_dir, real_module_dir) != NULL) {
+		free(module_dir);
+		module_dir = real_module_dir;
+	}
+
+	recursive_action(module_dir, ACTION_RECURSE,
+		check_module_name_match, 0, filename, 0);
+
+	/* Check if we have a complete path */
+	if (g_filename != NULL) {
+		if ((stat(g_filename, &st) == 0) && S_ISREG(st.st_mode))
+			ret = 0;
+		else
+			free(g_filename);
+	}
+	free(filename);
+
+	return ret;
+}
+ 
+ 
+ #if ENABLE_FEATURE_2_4_MODULES
+@@ -677,7 +765,6 @@
+ #endif
+ 
+ 
+-#define _PATH_MODULES	"/lib/modules"
+ enum { STRVERSIONLEN = 64 };
+ 
+ /*======================================================================*/
+@@ -790,37 +877,6 @@
+ static int n_ext_modules_used;
+ extern int delete_module(const char *);
+ 
+-static char *m_filename;
+-static char *m_fullName;
+-
+-
+-/*======================================================================*/
+-
+-
+-static int check_module_name_match(const char *filename, struct stat *statbuf,
+-				void *userdata, int depth)
+-{
+-	char *fullname = (char *) userdata;
+-
+-	if (fullname[0] == '\0')
+-		return FALSE;
+-	else {
+-		char *tmp, *tmp1 = xstrdup(filename);
+-		tmp = bb_get_last_path_component(tmp1);
+-		if (strcmp(tmp, fullname) == 0) {
+-			free(tmp1);
+-			/* Stop searching if we find a match */
+-			m_filename = xstrdup(filename);
+-			return FALSE;
+-		}
+-		free(tmp1);
+-	}
+-	return TRUE;
+-}
+-
+-
+-/*======================================================================*/
+-
+ static struct obj_file *arch_new_file(void)
+ {
+ 	struct arch_file *f;
+@@ -3952,33 +4008,35 @@
+ void print_load_map(struct obj_file *f);
+ #endif
+ 
+-int insmod_main( int argc, char **argv);
+-int insmod_main( int argc, char **argv)
+int insmod_main_24( int argc, char **argv)
+ {
+ 	char *opt_o, *arg1;
+ 	int len;
+ 	int k_crcs;
+-	char *tmp, *tmp1;
+ 	unsigned long m_size;
+ 	ElfW(Addr) m_addr;
+ 	struct obj_file *f;
+ 	struct stat st;
+ 	char *m_name = 0;
+-	int exit_status = EXIT_FAILURE;
+	int ret = EINVAL;
+ 	int m_has_modinfo;
+ #if ENABLE_FEATURE_INSMOD_VERSION_CHECKING
+ 	struct utsname uts_info;
+ 	char m_strversion[STRVERSIONLEN];
+ 	int m_version, m_crcs;
+ #endif
+-#if ENABLE_FEATURE_CLEAN_UP
+-	FILE *fp = 0;
+-#else
+-	FILE *fp;
+-#endif
+-	int k_version = 0;
+	FILE *fp = NULL;
+	int k_version;
+ 	struct utsname myuname;
+ 
+	/* check the kernel version */
+	if ((uname(&myuname) != 0) || (myuname.release[0] != '2'))
+		return EINVAL;
+
+	k_version = myuname.release[2] - '0';
+	if (k_version > 4)
+		return ENOTSUP;
+
+ 	/* Parse any options */
+ 	getopt32(argv, OPTION_STR, &opt_o);
+ 	arg1 = argv[optind];
+@@ -3987,110 +4045,18 @@
+ 		m_name = xstrdup(opt_o);
+ 	}
+ 
+-	if (arg1 == NULL) {
+	if (arg1 == NULL)
+ 		bb_show_usage();
+-	}
+-
+-	/* Grab the module name */
+-	tmp1 = xstrdup(arg1);
+-	tmp = basename(tmp1);
+-	len = strlen(tmp);
+-
+-	if (uname(&myuname) == 0) {
+-		if (myuname.release[0] == '2') {
+-			k_version = myuname.release[2] - '0';
+-		}
+-	}
+-
+-#if ENABLE_FEATURE_2_6_MODULES
+-	if (k_version > 4 && len > 3 && tmp[len - 3] == '.'
+-	 && tmp[len - 2] == 'k' && tmp[len - 1] == 'o'
+-	) {
+-		len -= 3;
+-		tmp[len] = '\0';
+-	} else
+-#endif
+-		if (len > 2 && tmp[len - 2] == '.' && tmp[len - 1] == 'o') {
+-			len -= 2;
+-			tmp[len] = '\0';
+-		}
+-
+-
+-#if ENABLE_FEATURE_2_6_MODULES
+-	if (k_version > 4)
+-		m_fullName = xasprintf("%s.ko", tmp);
+-	else
+-#endif
+-		m_fullName = xasprintf("%s.o", tmp);
+ 
+-	if (!m_name) {
+-		m_name = tmp;
+-	} else {
+-		free(tmp1);
+-		tmp1 = 0;       /* flag for free(m_name) before exit() */
+-	}
+-
+-	/* Get a filedesc for the module.  Check we we have a complete path */
+-	if (stat(arg1, &st) < 0 || !S_ISREG(st.st_mode)
+-	 || (fp = fopen(arg1, "r")) == NULL
+-	) {
+-		/* Hmm.  Could not open it.  First search under /lib/modules/`uname -r`,
+-		 * but do not error out yet if we fail to find it... */
+-		if (k_version) {	/* uname succeedd */
+-			char *module_dir;
+-			char *tmdn;
+-			char real_module_dir[FILENAME_MAX];
+-
+-			tmdn = concat_path_file(_PATH_MODULES, myuname.release);
+-			/* Jump through hoops in case /lib/modules/`uname -r`
+-			 * is a symlink.  We do not want recursive_action to
+-			 * follow symlinks, but we do want to follow the
+-			 * /lib/modules/`uname -r` dir, So resolve it ourselves
+-			 * if it is a link... */
+-			if (realpath(tmdn, real_module_dir) == NULL)
+-				module_dir = tmdn;
+-			else
+-				module_dir = real_module_dir;
+-			recursive_action(module_dir, ACTION_RECURSE,
+-					check_module_name_match, 0, m_fullName, 0);
+-			free(tmdn);
+-		}
+-
+-		/* Check if we have found anything yet */
+-		if (m_filename == 0 || ((fp = fopen(m_filename, "r")) == NULL)) {
+-			char module_dir[FILENAME_MAX];
+-
+-			free(m_filename);
+-			m_filename = 0;
+-			if (realpath (_PATH_MODULES, module_dir) == NULL)
+-				strcpy(module_dir, _PATH_MODULES);
+-			/* No module found under /lib/modules/`uname -r`, this
+-			 * time cast the net a bit wider.  Search /lib/modules/ */
+-			if (!recursive_action(module_dir, ACTION_RECURSE,
+-						    check_module_name_match, 0, m_fullName, 0)
+-			) {
+-				if (m_filename == 0
+-				 || ((fp = fopen(m_filename, "r")) == NULL)
+-				) {
+-					bb_error_msg("%s: no module by that name found", m_fullName);
+-					goto out;
+-				}
+-			} else
+-				bb_error_msg_and_die("%s: no module by that name found", m_fullName);
+-		}
+-	} else
+-		m_filename = xstrdup(arg1);
+-
+-	if (flag_verbose)
+-		printf("Using %s\n", m_filename);
+	ret = find_module(arg1);
+	if (ret)
+		goto out;
+ 
+-#if ENABLE_FEATURE_2_6_MODULES
+-	if (k_version > 4) {
+-		argv[optind] = m_filename;
+-		optind--;
+-		return insmod_ng_main(argc - optind, argv + optind);
+	fp = fopen(g_filename, "r");
+	if (!fp) {
+		ret = errno;
+		goto out;
+ 	}
+-#endif
+ 
+ 	f = obj_load(fp, LOADBITS);
+ 	if (f == NULL)
+@@ -4120,7 +4086,7 @@
+ 				"\t%s was compiled for kernel version %s\n"
+ 				"\twhile this kernel is version %s",
+ 				flag_force_load ? "warning: " : "",
+-				m_filename, m_strversion, uts_info.release);
+				g_filename, m_strversion, uts_info.release);
+ 			if (!flag_force_load)
+ 				goto out;
+ 		}
+@@ -4173,7 +4139,7 @@
+ 	hide_special_symbols(f);
+ 
+ #if ENABLE_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
+-	add_ksymoops_symbols(f, m_filename, m_name);
+	add_ksymoops_symbols(f, g_filename, m_name);
+ #endif /* FEATURE_INSMOD_KSYMOOPS_SYMBOLS */
+ 
+ 	new_create_module_ksymtab(f);
+@@ -4220,8 +4186,7 @@
+ 	if (flag_print_load_map)
+ 		print_load_map(f);
+ 
+-	exit_status = EXIT_SUCCESS;
+-
+	ret = 0;
+ out:
+ #if ENABLE_FEATURE_CLEAN_UP
+ 	if (fp)
+@@ -4229,21 +4194,13 @@
+ 	free(tmp1);
+ 	if (!tmp1)
+ 		free(m_name);
+-	free(m_filename);
+	free(g_filename);
+ #endif
+ 	return exit_status;
+ }
+-
+-
+ #endif
+ 
+-
+ #if ENABLE_FEATURE_2_6_MODULES
+-
+-#include <sys/mman.h>
+-#include <asm/unistd.h>
+-#include <sys/syscall.h>
+-
+ /* We use error numbers in a loose translation... */
+ static const char *moderror(int err)
+ {
+@@ -4261,19 +4218,33 @@
+ 	}
+ }
+ 
+-int insmod_ng_main(int argc, char **argv);
+-int insmod_ng_main(int argc, char **argv)
+int insmod_main_26(int argc, char **argv)
+ {
+-	long ret;
+-	size_t len;
+	char *filename, *options;
+	struct utsname myuname;
+	int k_version;
+ 	int optlen;
+	size_t len;
+ 	void *map;
+-	char *filename, *options;
+	long ret = 0;
+
+	/* check the kernel version */
+	if ((uname(&myuname) != 0) || (myuname.release[0] != '2'))
+		return EINVAL;
+
+	k_version = myuname.release[2] - '0';
+	if (k_version <= 4)
+		return ENOTSUP;
+ 
+ 	filename = *++argv;
+ 	if (!filename)
+ 		bb_show_usage();
+ 
+	g_filename = filename;
+	ret = find_module(filename);
+	if (ret)
+		goto done;
+
+ 	/* Rest is options */
+ 	options = xzalloc(1);
+ 	optlen = 0;
+@@ -4283,36 +4254,46 @@
+ 		optlen += sprintf(options + optlen, (strchr(*argv,' ') ? "\"%s\" " : "%s "), *argv);
+ 	}
+ 
+-#if 0
+-	/* Any special reason why mmap? It isn't performace critical... */
+-	int fd;
+-	struct stat st;
+-	unsigned long len;
+-	fd = xopen(filename, O_RDONLY);
+-	fstat(fd, &st);
+-	len = st.st_size;
+-	map = mmap(NULL, len, PROT_READ, MAP_PRIVATE, fd, 0);
+-	if (map == MAP_FAILED) {
+-		bb_perror_msg_and_die("cannot mmap '%s'", filename);
+-	}
+-
+-	/* map == NULL on Blackfin, probably on other MMU-less systems too. Workaround. */
+-	if (map == NULL) {
+-		map = xmalloc(len);
+-		xread(fd, map, len);
+-	}
+-#else
+ 	len = MAXINT(ssize_t);
+-	map = xmalloc_open_read_close(filename, &len);
+-#endif
+-
+	map = xmalloc_open_read_close(g_filename, &len);
+ 	ret = syscall(__NR_init_module, map, len, options);
+ 	if (ret != 0) {
+ 		bb_perror_msg_and_die("cannot insert '%s': %s (%li)",
+-				filename, moderror(errno), ret);
+				g_filename, moderror(errno), ret);
+ 	}
+done:
+	if (g_filename && (g_filename != filename))
+		free(g_filename);
+ 
+-	return 0;
+	return ret;
+ }
+ 
+ #endif
+
+int insmod_main(int argc, char **argv)
+{
+	int ret;
+
+#if ENABLE_FEATURE_2_6_MODULES
+	ret = insmod_main_26(argc, argv);
+	if (ret != ENOTSUP)
+		goto done;
+#endif
+
+#if ENABLE_FEATURE_2_4_MODULES
+	ret = insmod_main_24(argc, argv);
+	if (ret != ENOTSUP)
+		goto done;
+#endif
+
+	fprintf(stderr, "Error: Kernel version not supported\n");
+	return 1;
+
+done:
+	if (ret) {
+		errno = ret;
+		bb_perror_msg("Loading module failed");
+		return ret;
+	} else
+		return 0;
+}
--- a/package/busybox/patches/500-ipkg.patch
+++ b/package/busybox/patches/500-ipkg.patch
--- a/package/busybox/patches/501-libbb_hash.patch
+++ b/package/busybox/patches/501-libbb_hash.patch
@ -1,10 +1,10 @@
-Index: busybox-1.4.2/coreutils/md5_sha1_sum.c
+Index: busybox-1.7.2/coreutils/md5_sha1_sum.c
 ===================================================================
--- busybox-1.4.2.orig/coreutils/md5_sha1_sum.c	2007-06-04 13:21:31.536182440 +0200
-+++ busybox-1.4.2/coreutils/md5_sha1_sum.c	2007-06-04 13:21:37.709243992 +0200
-@@ -8,76 +8,10 @@
+--- busybox-1.7.2.orig/coreutils/md5_sha1_sum.c	2007-09-03 13:48:39.000000000 +0200
+++ busybox-1.7.2/coreutils/md5_sha1_sum.c	2007-10-04 15:45:02.423570273 +0200
+@@ -8,75 +8,10 @@
 
- #include "busybox.h"
+ #include "libbb.h"
 
 -typedef enum { HASH_SHA1, HASH_MD5 } hash_algo_t;
 -
@ -36,9 +36,8 @@ Index: busybox-1.4.2/coreutils/md5_sha1_sum.c
 -
 -	src_fd = STDIN_FILENO;
 -	if (NOT_LONE_DASH(filename)) {
-		src_fd = open(filename, O_RDONLY);
+-		src_fd = open_or_warn(filename, O_RDONLY);
 -		if (src_fd < 0) {
-			bb_perror_msg("%s", filename);
 -			return NULL;
 -		}
 -	}
@ -76,35 +75,35 @@ Index: busybox-1.4.2/coreutils/md5_sha1_sum.c
 -	return hash_value;
 -}
 -
+ int md5_sha1_sum_main(int argc, char **argv);
 int md5_sha1_sum_main(int argc, char **argv)
 {
- 	int return_value = EXIT_SUCCESS;
-Index: busybox-1.4.2/include/libbb.h
+Index: busybox-1.7.2/include/libbb.h
 ===================================================================
--- busybox-1.4.2.orig/include/libbb.h	2007-06-04 13:21:35.388596784 +0200
-+++ busybox-1.4.2/include/libbb.h	2007-06-04 13:21:37.709243992 +0200
-@@ -641,6 +641,7 @@
+--- busybox-1.7.2.orig/include/libbb.h	2007-10-04 15:20:22.275221430 +0200
+++ busybox-1.7.2/include/libbb.h	2007-10-04 15:42:10.585777803 +0200
+@@ -947,6 +947,7 @@
 extern const char bb_uuenc_tbl_std[];
- void bb_uuencode(const unsigned char *s, char *store, const int length, const char *tbl);
+ void bb_uuencode(char *store, const void *s, int length, const char *tbl);
 
 +typedef enum { HASH_SHA1, HASH_MD5 } hash_algo_t;
 typedef struct sha1_ctx_t {
 	uint32_t count[2];
 	uint32_t hash[5];
-@@ -662,6 +663,8 @@
+@@ -968,6 +969,8 @@
 void md5_begin(md5_ctx_t *ctx);
 void md5_hash(const void *data, size_t length, md5_ctx_t *ctx);
 void *md5_end(void *resbuf, md5_ctx_t *ctx);
 +unsigned char *hash_bin_to_hex(unsigned char *hash_value, unsigned hash_length);
 +uint8_t *hash_file(const char *filename, hash_algo_t hash_algo);
 
- uint32_t *crc32_filltable(int endian);
+ uint32_t *crc32_filltable(uint32_t *tbl256, int endian);
 
-Index: busybox-1.4.2/libbb/Kbuild
+Index: busybox-1.7.2/libbb/Kbuild
 ===================================================================
--- busybox-1.4.2.orig/libbb/Kbuild	2007-06-04 13:21:31.548180616 +0200
-+++ busybox-1.4.2/libbb/Kbuild	2007-06-04 13:21:37.710243840 +0200
-@@ -37,6 +37,7 @@
+--- busybox-1.7.2.orig/libbb/Kbuild	2007-09-03 13:48:41.000000000 +0200
+++ busybox-1.7.2/libbb/Kbuild	2007-10-04 15:42:10.613779401 +0200
+@@ -38,6 +38,7 @@
 lib-y += get_last_path_component.o
 lib-y += get_line_from_file.o
 lib-y += getopt32.o
@ -112,11 +111,11 @@ Index: busybox-1.4.2/libbb/Kbuild
 lib-y += herror_msg.o
 lib-y += herror_msg_and_die.o
 lib-y += human_readable.o
-Index: busybox-1.4.2/libbb/hash.c
+Index: busybox-1.7.2/libbb/hash.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/libbb/hash.c	2007-06-04 13:21:37.710243840 +0200
-@@ -0,0 +1,82 @@
+++ busybox-1.7.2/libbb/hash.c	2007-10-04 15:45:08.279904000 +0200
+@@ -0,0 +1,81 @@
 +/*
 + *  Copyright (C) 2003 Glenn L. McGrath
 + *  Copyright (C) 2003-2004 Erik Andersen
@ -158,20 +157,19 @@ Index: busybox-1.4.2/libbb/hash.c
 +
 +	src_fd = STDIN_FILENO;
 +	if (NOT_LONE_DASH(filename)) {
-+		src_fd = open(filename, O_RDONLY);
+		src_fd = open_or_warn(filename, O_RDONLY);
 +		if (src_fd < 0) {
-+			bb_perror_msg("%s", filename);
 +			return NULL;
 +		}
 +	}
 +
 +	/* figure specific hash algorithims */
-+	if (hash_algo==HASH_MD5) {
+	if (ENABLE_MD5SUM && hash_algo==HASH_MD5) {
 +		md5_begin(&context.md5);
 +		update = (void (*)(const void*, size_t, void*))md5_hash;
 +		final = (void (*)(void*, void*))md5_end;
 +		hash_len = 16;
-+	} else if (hash_algo==HASH_SHA1) {
+	} else if (ENABLE_SHA1SUM && hash_algo==HASH_SHA1) {
 +		sha1_begin(&context.sha1);
 +		update = (void (*)(const void*, size_t, void*))sha1_hash;
 +		final = (void (*)(void*, void*))sha1_end;
--- a/package/busybox/patches/510-awx.patch
+++ b/package/busybox/patches/510-awx.patch
@ -1,10 +1,10 @@
-Index: busybox-1.4.2/editors/awk.c
+Index: busybox-1.7.2/editors/awk.c
 ===================================================================
--- busybox-1.4.2.orig/editors/awk.c	2007-06-04 13:21:35.202625056 +0200
-+++ busybox-1.4.2/editors/awk.c	2007-06-04 13:21:37.927210856 +0200
-@@ -30,6 +30,11 @@
+--- busybox-1.7.2.orig/editors/awk.c	2007-10-05 01:39:50.073293533 +0200
+++ busybox-1.7.2/editors/awk.c	2007-10-05 02:16:42.539374788 +0200
+@@ -33,6 +33,11 @@
 /* these flags are static, don't change them when value is changed */
- #define	VF_DONTTOUCH (VF_ARRAY | VF_SPECIAL | VF_WALK | VF_CHILD | VF_DIRTY)
+ #define	VF_DONTTOUCH    (VF_ARRAY | VF_SPECIAL | VF_WALK | VF_CHILD | VF_DIRTY)
 
 +#ifdef CONFIG_AWX
 +#define fputs(s, stream) fputs_hook(s, stream)
@ -13,15 +13,14 @@ Index: busybox-1.4.2/editors/awk.c
 +
 /* Variable */
 typedef struct var_s {
- 	unsigned short type;		/* flags */
-@@ -50,10 +55,15 @@
- 	char *programname;
+ 	unsigned type;            /* flags */
+@@ -54,9 +59,14 @@
 } chain;
 
-+typedef var *(*awk_cfunc)(var *res, var *args, int nargs);
 /* Function */
+typedef var *(*awk_cfunc)(var *res, var *args, int nargs);
 typedef struct func_s {
- 	unsigned short nargs;
+ 	unsigned nargs;
 -	struct chain_s body;
 +	enum { AWKFUNC, CFUNC } type;
 +	union {
@ -31,17 +30,17 @@ Index: busybox-1.4.2/editors/awk.c
 } func;
 
 /* I/O stream */
-@@ -1312,7 +1322,8 @@
+@@ -1400,7 +1410,8 @@
 			next_token(TC_FUNCTION);
- 			pos++;
- 			f = newfunc(t.string);
+ 			g_pos++;
+ 			f = newfunc(t_string);
 -			f->body.first = NULL;
 +			f->type = AWKFUNC;
 +			f->x.body.first = NULL;
 			f->nargs = 0;
 			while (next_token(TC_VARIABLE | TC_SEQTERM) & TC_VARIABLE) {
- 				v = findvar(ahash, t.string);
-@@ -1321,7 +1332,7 @@
+ 				v = findvar(ahash, t_string);
+@@ -1409,7 +1420,7 @@
 				if (next_token(TC_COMMA | TC_SEQTERM) & TC_SEQTERM)
 					break;
 			}
@ -50,33 +49,34 @@ Index: busybox-1.4.2/editors/awk.c
 			chain_group();
 			clear_array(ahash);
 
-@@ -2260,7 +2271,8 @@
+@@ -2372,7 +2383,8 @@
 			break;
 
 		case XC( OC_FUNC ):
-			if (! op->r.f->body.first)
+-			if (!op->r.f->body.first)
 +			if ((op->r.f->type == AWKFUNC) &&
 +				!op->r.f->x.body.first)
- 				runtime_error(EMSG_UNDEF_FUNC);
+ 				syntax_error(EMSG_UNDEF_FUNC);
 
 			X.v = R.v = nvalloc(op->r.f->nargs+1);
-@@ -2277,7 +2289,11 @@
+@@ -2389,7 +2401,10 @@
 			fnargs = X.v;
 
- 			L.s = programname;
+ 			L.s = g_progname;
 -			res = evaluate(op->r.f->body.first, res);
 +			if (op->r.f->type == AWKFUNC)
 +				res = evaluate(op->r.f->x.body.first, res);
 +			else if (op->r.f->type == CFUNC)
 +				res = op->r.f->x.cfunc(res, fnargs, op->r.f->nargs);
-+
- 			programname = L.s;
+ 			g_progname = L.s;
 
 			nvfree(fnargs);
-@@ -2637,6 +2653,11 @@
- 	return &rsm;
+@@ -2753,6 +2768,13 @@
 }
 
+ int awk_main(int argc, char **argv);
+int awx_main(int argc, char **argv);
+
 +#ifdef CONFIG_AWX
 +static int is_awx = 0;
 +#include "awx.c"
@ -84,23 +84,24 @@ Index: busybox-1.4.2/editors/awk.c
 +
 int awk_main(int argc, char **argv)
 {
- 	int i, j, flen;
-@@ -2693,6 +2714,10 @@
- 		free(s);
+ 	unsigned opt;
+@@ -2817,6 +2839,11 @@
+ 			*s1 = '=';
+ 		}
 	}
- 
+
 +#ifdef CONFIG_AWX
 +	do_awx(argc, argv);
 +#endif
 +
- 	programname = NULL;
- 	while((c = getopt(argc, argv, "F:v:f:W:")) != EOF) {
- 		switch (c) {
-Index: busybox-1.4.2/editors/awx.c
+ 	opt_complementary = "v::f::";
+ 	opt = getopt32(argv, "F:v:f:W:", &opt_F, &opt_v, &opt_f, &opt_W);
+ 	argv += optind;
+Index: busybox-1.7.2/editors/awx.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/editors/awx.c	2007-06-04 13:21:37.928210704 +0200
-@@ -0,0 +1,633 @@
+++ busybox-1.7.2/editors/awx.c	2007-10-05 02:10:16.393369582 +0200
+@@ -0,0 +1,636 @@
 +/*
 + * awk web extension
 + *
@ -126,7 +127,7 @@ Index: busybox-1.4.2/editors/awx.c
 +static int lang_inuse = 0;
 +
 +/* look up a translation symbol from the hash */
-+static inline char *translate_lookup(char *str)
+static inline const char *translate_lookup(char *str)
 +{
 +	char *name, *def, *p;
 +	hash_item *hi;
@ -151,7 +152,7 @@ Index: busybox-1.4.2/editors/awx.c
 +/* look for translation markers in the line and return the translated string */
 +static char *translate_line(char *line)
 +{
-+	char *tok[MAX_TR * 3];
+	const char *tok[MAX_TR * 3];
 +	char *l, *p, *p2 = NULL, *res;
 +	int len = 0, _pos = 0, i, tr_abort = 0;
 +	static char *backlog = NULL;
@ -283,7 +284,7 @@ Index: busybox-1.4.2/editors/awx.c
 +{
 +	const char *langfmt = "/usr/lib/webif/lang/%s.txt";
 +	char lbuf[LINE_BUF];
-+	char *lang;
+	const char *lang;
 +
 +	if (!lang_inuse)
 +		init_lang(res, args, nargs);
@ -299,7 +300,7 @@ Index: busybox-1.4.2/editors/awx.c
 +}
 +		
 +/* read the contents of an entire file */
-+static char *get_file(char *fname)
+static char *get_file(const char *fname)
 +{
 +	FILE *F;
 +	char *s = NULL;
@ -343,8 +344,8 @@ Index: busybox-1.4.2/editors/awx.c
 +
 +	tv = nvalloc(1);
 +	memset(&tmp, 0, sizeof(tmp));
-+	pos = p;
-+	t.lineno = 1;
+	g_pos = p;
+	t_lineno = 1;
 +	while ((tclass = next_token(TC_EOF | TC_OPSEQ |
 +				TC_OPTERM | TC_BEGIN | TC_FUNCDECL)) != TC_EOF) {
 +		if (tclass & TC_OPTERM)
@ -357,13 +358,13 @@ Index: busybox-1.4.2/editors/awx.c
 +			chain_group();
 +		} else if (tclass & TC_FUNCDECL) {
 +			next_token(TC_FUNCTION);
-+			pos++;
-+			f = newfunc(t.string);
+			g_pos++;
+			f = newfunc(t_string);
 +			f->type = AWKFUNC;
 +			f->x.body.first = NULL;
 +			f->nargs = 0;
 +			while (next_token(TC_VARIABLE | TC_SEQTERM) & TC_VARIABLE) {
-+				v = findvar(ahash, t.string);
+				v = findvar(ahash, t_string);
 +				v->x.aidx = (f->nargs)++;
 +
 +				if (next_token(TC_COMMA | TC_SEQTERM) & TC_SEQTERM)
@ -382,10 +383,12 @@ Index: busybox-1.4.2/editors/awx.c
 +
 +/* include an awk file and run its BEGIN{} section */
 +static xhash *includes = NULL;
-+static void include_file(char *filename)
+static void include_file(const char *filename)
 +{
 +	char *s;
 +	var *v;
+	int oldlnr = g_lineno;
+	const char *oldprg = g_progname;
 +
 +	if (!includes)
 +		includes = hash_init();
@ -402,13 +405,17 @@ Index: busybox-1.4.2/editors/awx.c
 +		fprintf(stderr, "Could not open file.\n");
 +		return;
 +	}
+	g_lineno = 1;
+	g_progname = xstrdup(filename);
 +	parse_include(s+1);
 +	free(s);
+	g_lineno = oldlnr;
+	g_progname = oldprg;
 +}
 +
 +static var *include(var *res, var *args, int nargs)
 +{
-+	char *s;
+	const char *s;
 +
 +	s = getvar_s(args);
 +	if (s && (strlen(s) > 0))
@ -424,7 +431,7 @@ Index: busybox-1.4.2/editors/awx.c
 +	node *n;
 +
 +	memset(&body, 0, sizeof(body));
-+	pos = str;
+	g_pos = str;
 +	seq = &body;
 +	
 +	/* end of expression, assume that there's going to be a free byte
@ -456,7 +463,7 @@ Index: busybox-1.4.2/editors/awx.c
 +	
 +	if (!e || !e->var)
 +		return;
-+	lineno = e->line;
+	g_lineno = e->line;
 +	switch (e->t) {
 +		case T_TEXT:
 +			s = malloc(strlen(e->var) + 2);
@ -502,38 +509,36 @@ Index: busybox-1.4.2/editors/awx.c
 +}
 +
 +/* awk method render(), which opens a template file and processes all awk ssi calls */
-+static void render_file(char *filename)
+static void render_file(const char *filename)
 +{
 +	struct template_cb tcb;
 +	struct template_element *e;
 +	FILE *f;
-+	char *oldprg;
-+	int oldlnr;
+	const char *oldprg = g_progname;
+	int oldlnr = g_lineno;
 +	
 +	if (!filename)
 +		return;
 +
-+	oldlnr = lineno;
-+	oldprg = programname;
-+	programname = filename;
-+
 +	f = fopen(filename, "r");
 +	if (!f)
 +		return;
 +	
+	g_progname = xstrdup(filename);
+	g_lineno = 1;
 +	memset(&tcb, 0, sizeof(tcb));
 +	tcb.handle_element = render_element;
 +	e = parse_template(&tcb, f);
 +	execute_template(&tcb, e);
 +	free_template(&tcb, e);
 +	fclose(f);
-+	programname = oldprg;
-+	lineno = oldlnr;
+	g_progname = oldprg;
+	g_lineno = oldlnr;
 +}
 +
 +static var *render(var *res, var *args, int nargs)
 +{
-+	char *s;
+	const char *s;
 +
 +	s = getvar_s(args);
 +	if (!s)
@ -555,7 +560,7 @@ Index: busybox-1.4.2/editors/awx.c
 +}
 +
 +/* registers a global c function for the awk interpreter */
-+static void register_cfunc(char *name, awk_cfunc cfunc, int nargs)
+static void register_cfunc(const char *name, awk_cfunc cfunc, int nargs)
 +{
 +	func *f;
 +
@ -573,7 +578,7 @@ Index: busybox-1.4.2/editors/awx.c
 +	setvar_u(findvar(formvar, name), value);
 +}
 +
-+static char *cgi_getvar(char *name)
+static const char *cgi_getvar(const char *name)
 +{
 +	if (!formvar) {
 +		formvar = hash_init();
@ -589,8 +594,7 @@ Index: busybox-1.4.2/editors/awx.c
 +/* function call for accessing cgi form variables */
 +static var *getvar(var *res, var *args, int nargs)
 +{
-+	char *s;
-+	char *svar;
+	const char *s, *svar;
 +
 +	s = getvar_s(args);
 +	if (!s)
@ -608,7 +612,7 @@ Index: busybox-1.4.2/editors/awx.c
 +/* call an awk function without arguments by string reference */
 +static var *call(var *res, var *args, int nargs)
 +{
-+	char *s = getvar_s(args);
+	const char *s = getvar_s(args);
 +	func *f;
 +
 +	if (!s)
@ -629,10 +633,10 @@ Index: busybox-1.4.2/editors/awx.c
 +	char *tmp, *s = NULL;
 +
 +	zero_out_var(&tv);
-+	programname = name;
+	g_progname = name;
 +
 +	/* read the main controller source */
-+	s = get_file(programname);
+	s = get_file(g_progname);
 +	if (!s) {
 +		fprintf(stderr, "Could not open file\n");
 +		return 1;
@ -650,7 +654,7 @@ Index: busybox-1.4.2/editors/awx.c
 +
 +	action = newvar("ACTION");
 +	if (!(strlen(getvar_s(action)) > 0)) {
-+		tmp = cgi_getvar("action");
+		tmp = (char *) cgi_getvar("action");
 +		if (!tmp || (strlen(tmp) <= 0))
 +			tmp = strdup("default");
 +
@ -694,21 +698,21 @@ Index: busybox-1.4.2/editors/awx.c
 +		return 0;
 +
 +	/* fill in ARGV array */
-+	setvar_i(V[ARGC], argc + 1);
-+	setari_u(V[ARGV], 0, "awx");
+	setvar_i(intvar[ARGC], argc + 1);
+	setari_u(intvar[ARGV], 0, "awx");
 +	i = 0;
 +	while (*args)
-+		setari_u(V[ARGV], ++i, *args++);
+		setari_u(intvar[ARGV], ++i, *args++);
 +	
 +	while((c = getopt(argc, argv, "i:f:")) != EOF) {
 +		switch(c) {
 +			case 'i':
-+				programname = optarg;
+				g_progname = optarg;
 +				include_file(optarg);
 +				break;
 +			case 'f':
 +				ret = 0;
-+				programname = optarg;
+				g_progname = optarg;
 +				render_file(optarg);
 +				goto done;
 +		}
@ -734,10 +738,10 @@ Index: busybox-1.4.2/editors/awx.c
 +	return awk_main(argc, argv);
 +}
 +
-Index: busybox-1.4.2/editors/awx_parser.h
+Index: busybox-1.7.2/editors/awx_parser.h
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/editors/awx_parser.h	2007-06-04 13:21:37.928210704 +0200
+++ busybox-1.7.2/editors/awx_parser.h	2007-10-05 01:43:59.487506840 +0200
@@ -0,0 +1,38 @@
 +#ifndef __TEMPLATE_PARSER_H
 +#define __TEMPLATE_PARSER_H
@ -777,10 +781,10 @@ Index: busybox-1.4.2/editors/awx_parser.h
 +void free_template(struct template_cb *cb, struct template_element *e);
 +
 +#endif
-Index: busybox-1.4.2/editors/awx_parser.l
+Index: busybox-1.7.2/editors/awx_parser.l
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/editors/awx_parser.l	2007-06-04 13:21:37.929210552 +0200
+++ busybox-1.7.2/editors/awx_parser.l	2007-10-05 01:43:59.547510259 +0200
@@ -0,0 +1,302 @@
 +%{
 +#include <stdio.h>
@ -1084,10 +1088,10 @@ Index: busybox-1.4.2/editors/awx_parser.l
 +	free(e);
 +	return free_template(cb, next);
 +}
-Index: busybox-1.4.2/editors/Config.in
+Index: busybox-1.7.2/editors/Config.in
 ===================================================================
--- busybox-1.4.2.orig/editors/Config.in	2007-06-04 13:21:31.486190040 +0200
-+++ busybox-1.4.2/editors/Config.in	2007-06-04 13:21:37.929210552 +0200
+--- busybox-1.7.2.orig/editors/Config.in	2007-10-05 01:39:50.097294897 +0200
+++ busybox-1.7.2/editors/Config.in	2007-10-05 01:43:59.583512308 +0200
@@ -12,6 +12,13 @@
 	  Awk is used as a pattern scanning and processing language.  This is
 	  the BusyBox implementation of that programming language.
@ -1102,11 +1106,11 @@ Index: busybox-1.4.2/editors/Config.in
 config FEATURE_AWK_MATH
 	bool "Enable math functions (requires libm)"
 	default y
-Index: busybox-1.4.2/editors/Kbuild
+Index: busybox-1.7.2/editors/Kbuild
 ===================================================================
--- busybox-1.4.2.orig/editors/Kbuild	2007-06-04 13:21:31.492189128 +0200
-+++ busybox-1.4.2/editors/Kbuild	2007-06-04 13:21:37.929210552 +0200
-@@ -10,3 +10,12 @@
+--- busybox-1.7.2.orig/editors/Kbuild	2007-10-05 01:39:50.105295361 +0200
+++ busybox-1.7.2/editors/Kbuild	2007-10-05 01:43:59.627514818 +0200
+@@ -12,3 +12,12 @@
 lib-$(CONFIG_PATCH)     += patch.o
 lib-$(CONFIG_SED)       += sed.o
 lib-$(CONFIG_VI)        += vi.o
@ -1119,22 +1123,22 @@ Index: busybox-1.4.2/editors/Kbuild
 +editors/awx_parser.o: editors/awx_parser.c FORCE
 +	$(call cmd,force_checksrc)
 +	$(call if_changed_rule,cc_o_c)
-Index: busybox-1.4.2/include/applets.h
+Index: busybox-1.7.2/include/applets.h
 ===================================================================
--- busybox-1.4.2.orig/include/applets.h	2007-06-04 13:21:36.732392496 +0200
-+++ busybox-1.4.2/include/applets.h	2007-06-04 13:21:37.929210552 +0200
-@@ -60,6 +60,7 @@
+--- busybox-1.7.2.orig/include/applets.h	2007-10-05 01:43:59.203490652 +0200
+++ busybox-1.7.2/include/applets.h	2007-10-05 01:43:59.647515958 +0200
+@@ -76,6 +76,7 @@
 USE_ARPING(APPLET(arping, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
 USE_ASH(APPLET_NOUSAGE(ash, ash, _BB_DIR_BIN, _BB_SUID_NEVER))
- USE_AWK(APPLET(awk, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
+ USE_AWK(APPLET_NOEXEC(awk, awk, _BB_DIR_USR_BIN, _BB_SUID_NEVER, awk))
 +USE_AWX(APPLET_NOUSAGE(awx, awx, _BB_DIR_USR_BIN, _BB_SUID_NEVER)) 
- USE_BASENAME(APPLET(basename, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
+ USE_BASENAME(APPLET_NOFORK(basename, basename, _BB_DIR_USR_BIN, _BB_SUID_NEVER, basename))
 USE_BBCONFIG(APPLET(bbconfig, _BB_DIR_BIN, _BB_SUID_NEVER))
 //USE_BBSH(APPLET(bbsh, _BB_DIR_BIN, _BB_SUID_NEVER))
-Index: busybox-1.4.2/include/cgi.h
+Index: busybox-1.7.2/include/cgi.h
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/include/cgi.h	2007-06-04 13:21:37.929210552 +0200
+++ busybox-1.7.2/include/cgi.h	2007-10-05 01:43:59.667517098 +0200
@@ -0,0 +1,8 @@
 +#ifndef CGI_H
 +#define CGI_H
@ -1144,10 +1148,10 @@ Index: busybox-1.4.2/include/cgi.h
 +int cgi_init(var_handler);
 +
 +#endif
-Index: busybox-1.4.2/libbb/cgi.c
+Index: busybox-1.7.2/libbb/cgi.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ busybox-1.4.2/libbb/cgi.c	2007-06-04 13:21:37.930210400 +0200
+++ busybox-1.7.2/libbb/cgi.c	2007-10-05 01:43:59.707519378 +0200
@@ -0,0 +1,457 @@
 +/* --------------------------------------------------------------------------
 + * functions for processing cgi form data
@ -1606,14 +1610,15 @@ Index: busybox-1.4.2/libbb/cgi.c
 +
 +	return retval;
 +} 
-Index: busybox-1.4.2/libbb/Kbuild
+Index: busybox-1.7.2/libbb/Kbuild
 ===================================================================
--- busybox-1.4.2.orig/libbb/Kbuild	2007-06-04 13:21:37.710243840 +0200
-+++ busybox-1.4.2/libbb/Kbuild	2007-06-04 13:21:37.930210400 +0200
-@@ -118,3 +118,6 @@
- lib-$(CONFIG_MDEV) += xregcomp.o
- lib-$(CONFIG_LESS) += xregcomp.o
- lib-$(CONFIG_DEVFSD) += xregcomp.o
-+
+--- busybox-1.7.2.orig/libbb/Kbuild	2007-10-05 01:43:59.387501141 +0200
+++ busybox-1.7.2/libbb/Kbuild	2007-10-05 01:43:59.751521884 +0200
+@@ -99,6 +99,7 @@
+ lib-y += xreadlink.o
+ 
+ # conditionally compiled objects:
 +lib-$(CONFIG_AWX) += cgi.o
-+
+ lib-$(CONFIG_FEATURE_MOUNT_LOOP) += loop.o
+ lib-$(CONFIG_LOSETUP) += loop.o
+ lib-$(CONFIG_FEATURE_MTAB_SUPPORT) += mtab.o
--- a/package/busybox/patches/999-insmod2.6_search.patch
+++ b/package/busybox/patches/999-insmod2.6_search.patch
@ -1,196 +0,0 @@
--- busybox/modutils/insmod.c	2007-05-11 12:10:43.000000000 +0200
-+++ busybox/modutils/insmod.c	2007-05-11 12:12:15.000000000 +0200
-@@ -75,6 +75,30 @@
- extern int insmod_ng_main( int argc, char **argv);
- #endif
- 
-+static char *m_filename;
-+static char *m_fullName;
-+#define _PATH_MODULES	"/lib/modules"
-+
-+static int check_module_name_match(const char *filename, struct stat *statbuf,
-+				   void *userdata, int depth)
-+{
-+	char *fullname = (char *) userdata;
-+
-+	if (fullname[0] == '\0')
-+		return FALSE;
-+	else {
-+		char *tmp, *tmp1 = xstrdup(filename);
-+		tmp = bb_get_last_path_component(tmp1);
-+		if (strcmp(tmp, fullname) == 0) {
-+			free(tmp1);
-+			/* Stop searching if we find a match */
-+			m_filename = xstrdup(filename);
-+			return FALSE;
-+		}
-+		free(tmp1);
-+	}
-+	return TRUE;
-+}
- 
- #if ENABLE_FEATURE_2_4_MODULES
- 
-@@ -680,7 +704,6 @@
- #endif
- 
- 
-#define _PATH_MODULES	"/lib/modules"
- enum { STRVERSIONLEN = 64 };
- 
- /*======================================================================*/
-@@ -793,37 +816,6 @@
- static int n_ext_modules_used;
- extern int delete_module(const char *);
- 
-static char *m_filename;
-static char *m_fullName;
-
-
-/*======================================================================*/
-
-
-static int check_module_name_match(const char *filename, struct stat *statbuf,
-				void *userdata, int depth)
-{
-	char *fullname = (char *) userdata;
-
-	if (fullname[0] == '\0')
-		return FALSE;
-	else {
-		char *tmp, *tmp1 = xstrdup(filename);
-		tmp = bb_get_last_path_component(tmp1);
-		if (strcmp(tmp, fullname) == 0) {
-			free(tmp1);
-			/* Stop searching if we find a match */
-			m_filename = xstrdup(filename);
-			return FALSE;
-		}
-		free(tmp1);
-	}
-	return TRUE;
-}
-
-
-/*======================================================================*/
-
- static struct obj_file *arch_new_file(void)
- {
- 	struct arch_file *f;
-@@ -4265,14 +4257,97 @@
- 	long ret;
- 	size_t len;
- 	void *map;
-	char *filename, *options;
-+	char *options, *tmp;
-+	struct stat st;
-+#if ENABLE_FEATURE_CLEAN_UP
-+	FILE *fp = 0;
-+#else
-+	FILE *fp;
-+#endif
-+	int k_version = 0;
-+	struct utsname myuname;
- 
-	filename = *++argv;
-	if (!filename)
-+	if (argc < 2)
- 		bb_show_usage();
- 
-+#if !ENABLE_FEATURE_2_4_MODULES
-+	/* Grab the module name */
-+	tmp = basename(xstrdup(argv[1]));
-+	len = strlen(tmp);
-+
-+	if (uname(&myuname) == 0) {
-+		if (myuname.release[0] == '2') {
-+			k_version = myuname.release[2] - '0';
-+		}
-+	}
-+
-+	if (len > 3 && tmp[len - 3] == '.' && tmp[len - 2] == 'k' && tmp[len - 1] == 'o') {
-+		len -= 3;
-+		tmp[len] = '\0';
-+	   }
-+
-+
-+		   m_fullName = xasprintf("%s.ko", tmp);
-+
-+		   /* Get a filedesc for the module.  Check we we have a complete path */
-+		   if (stat(argv[1], &st) < 0 || !S_ISREG(st.st_mode)
-+				     || (fp = fopen(argv[1], "r")) == NULL
-+		      ) {
-+		/* Hmm.  Could not open it.  First search under /lib/modules/`uname -r`,
-+		* but do not error out yet if we fail to find it... */
-+			   if (k_version) {	/* uname succeedd */
-+				   char *module_dir;
-+				   char *tmdn;
-+				   char real_module_dir[FILENAME_MAX];
-+
-+				   tmdn = concat_path_file(_PATH_MODULES, myuname.release);
-+			/* Jump through hoops in case /lib/modules/`uname -r`
-+				   * is a symlink.  We do not want recursive_action to
-+				   * follow symlinks, but we do want to follow the
-+				   * /lib/modules/`uname -r` dir, So resolve it ourselves
-+			* if it is a link... */
-+				   if (realpath(tmdn, real_module_dir) == NULL)
-+					   module_dir = tmdn;
-+				   else
-+					   module_dir = real_module_dir;
-+				   recursive_action(module_dir, TRUE, FALSE, FALSE,
-+						   check_module_name_match, 0, m_fullName, 0);
-+				   free(tmdn);
-+			   }
-+
-+			   /* Check if we have found anything yet */
-+			   if (m_filename == 0 || ((fp = fopen(m_filename, "r")) == NULL)) {
-+				   char module_dir[FILENAME_MAX];
-+
-+				   free(m_filename);
-+				   m_filename = 0;
-+				   if (realpath (_PATH_MODULES, module_dir) == NULL)
-+					   strcpy(module_dir, _PATH_MODULES);
-+			/* No module found under /lib/modules/`uname -r`, this
-+			* time cast the net a bit wider.  Search /lib/modules/ */
-+				   if (!recursive_action(module_dir, TRUE, FALSE, FALSE,
-+					check_module_name_match, 0, m_fullName, 0)
-+				      ) {
-+					   if (m_filename == 0
-+										|| ((fp = fopen(m_filename, "r")) == NULL)
-+					      ) {
-+						   bb_error_msg("%s: no module by that name found", m_fullName);
-+#if ENABLE_FEATURE_CLEAN_UP
-+							if(fp)
-+								fclose(fp);
-+							free(m_filename);
-+#endif
-+					      }
-+				      } else
-+					      bb_error_msg_and_die("%s: no module by that name found", m_fullName);
-+			   }
-+		      } else
-+			      m_filename = xstrdup(argv[1]);
-+#endif
-+
- 	/* Rest is options */
- 	options = xstrdup("");
-+	argv++;
- 	while (*++argv) {
- 		int optlen = strlen(options);
- 		options = xrealloc(options, optlen + 2 + strlen(*argv) + 2);
-@@ -4300,13 +4375,13 @@
- 	}
- #else
- 	len = MAXINT(ssize_t);
-	map = xmalloc_open_read_close(filename, &len);
-+	map = xmalloc_open_read_close(m_filename, &len);
- #endif
- 
- 	ret = syscall(__NR_init_module, map, len, options);
- 	if (ret != 0) {
- 		bb_perror_msg_and_die("cannot insert '%s': %s (%li)",
-				filename, moderror(errno), ret);
-+				m_filename, moderror(errno), ret);
- 	}
- 
- 	return 0;