ar71xx: rb91x: fix ethernet packet loss issues
The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40509 3c298f89-4303-0410-b956-a3cf2f4a3e73master
parent
bda46948be
commit
f5c08bb572
|
@ -24,6 +24,7 @@
|
||||||
#include <linux/gpio.h>
|
#include <linux/gpio.h>
|
||||||
#include <linux/platform_data/gpio-latch.h>
|
#include <linux/platform_data/gpio-latch.h>
|
||||||
#include <linux/platform_data/rb91x_nand.h>
|
#include <linux/platform_data/rb91x_nand.h>
|
||||||
|
#include <linux/platform_data/phy-at803x.h>
|
||||||
|
|
||||||
#include <asm/prom.h>
|
#include <asm/prom.h>
|
||||||
#include <asm/mach-ath79/ath79.h>
|
#include <asm/mach-ath79/ath79.h>
|
||||||
|
@ -223,6 +224,20 @@ static struct gpio_led rb711gr100_leds[] __initdata = {
|
||||||
},
|
},
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static struct at803x_platform_data rb91x_at803x_data = {
|
||||||
|
.disable_smarteee = 1,
|
||||||
|
.enable_rgmii_rx_delay = 1,
|
||||||
|
.enable_rgmii_tx_delay = 1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct mdio_board_info rb91x_mdio0_info[] = {
|
||||||
|
{
|
||||||
|
.bus_id = "ag71xx-mdio.0",
|
||||||
|
.phy_addr = 0,
|
||||||
|
.platform_data = &rb91x_at803x_data,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
static void __init rb711gr100_init_partitions(const struct rb_info *info)
|
static void __init rb711gr100_init_partitions(const struct rb_info *info)
|
||||||
{
|
{
|
||||||
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
|
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
|
||||||
|
@ -293,10 +308,14 @@ static void __init rb711gr100_setup(void)
|
||||||
ARRAY_SIZE(rb711gr100_spi_info));
|
ARRAY_SIZE(rb711gr100_spi_info));
|
||||||
|
|
||||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
||||||
|
AR934X_ETH_CFG_RXD_DELAY |
|
||||||
AR934X_ETH_CFG_SW_ONLY_MODE);
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||||
|
|
||||||
ath79_register_mdio(0, 0x0);
|
ath79_register_mdio(0, 0x0);
|
||||||
|
|
||||||
|
mdiobus_register_board_info(rb91x_mdio0_info,
|
||||||
|
ARRAY_SIZE(rb91x_mdio0_info));
|
||||||
|
|
||||||
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
||||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||||
ath79_eth0_data.phy_mask = BIT(0);
|
ath79_eth0_data.phy_mask = BIT(0);
|
||||||
|
|
Loading…
Reference in New Issue