ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30434 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Gabor Juhos
parent
9933f03b4a
commit
f42d3fde3b
|
|
@ -64,7 +64,8 @@ case "$FIRMWARE" in
|
|||
whr-g300n | \
|
||||
wl-351 | \
|
||||
wli-tx4-ag300n | \
|
||||
wr512-3gn)
|
||||
wr512-3gn | \
|
||||
wr6202)
|
||||
rt2x00_eeprom_extract "factory" 0 272
|
||||
;;
|
||||
|
||||
|
|
|
|||
|
|
@ -23,7 +23,8 @@ ramips_setup_interfaces()
|
|||
argus-atp52b | \
|
||||
b2c | \
|
||||
nw718 | \
|
||||
w502u)
|
||||
w502u | \
|
||||
wr6202)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
||||
;;
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,8 @@ preinit_set_mac_address() {
|
|||
hw550-3g |\
|
||||
nbg-419n |\
|
||||
omni-emb |\
|
||||
w502u)
|
||||
w502u |\
|
||||
wr6202)
|
||||
mac=$(ramips_get_mac_binary factory 40)
|
||||
ifconfig eth0 hw ether $mac 2>/dev/null
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -128,6 +128,9 @@ ramips_board_name() {
|
|||
*"WR512-3GN-like router")
|
||||
name="wr512-3gn"
|
||||
;;
|
||||
*"AWB WR6202")
|
||||
name="wr6202"
|
||||
;;
|
||||
*)
|
||||
name="generic"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ platform_check_image() {
|
|||
rt-g32-b1 | \
|
||||
rt-n15 | \
|
||||
w502u |\
|
||||
wr6202 |\
|
||||
v22rw-2x2 | \
|
||||
wl341v3 | \
|
||||
wli-tx4-ag300n | \
|
||||
|
|
|
|||
|
|
@ -45,4 +45,5 @@ enum ramips_mach_type {
|
|||
RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */
|
||||
RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */
|
||||
RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
|
||||
RAMIPS_MACH_WR6202, /* Accton WR6202 */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -2,6 +2,11 @@ if RALINK_RT305X
|
|||
|
||||
menu "Ralink RT350x machine selection"
|
||||
|
||||
config RT305X_MACH_WR6202
|
||||
bool "Accton WR6202"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_ALL0256N
|
||||
bool "Allnet ALL0256N support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
|
|
|
|||
|
|
@ -32,3 +32,4 @@ obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
|
|||
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
|
||||
obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o
|
||||
obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o
|
||||
obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
* AWB WR6202 board support
|
||||
*
|
||||
* Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include<linux/init.h>
|
||||
#include<linux/platform_device.h>
|
||||
#include<linux/mtd/mtd.h>
|
||||
#include<linux/mtd/partitions.h>
|
||||
#include<linux/mtd/physmap.h>
|
||||
#include<linux/gpio.h>
|
||||
|
||||
#include<asm/mach-ralink/machine.h>
|
||||
#include<asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include<asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include<asm/mach-ralink/rt305x.h>
|
||||
#include<asm/mach-ralink/rt305x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#define WR6202_GPIO_BUTTON_RESET 10 /* active low */
|
||||
#define WR6202_GPIO_BUTTON_WPS 0 /* active low */
|
||||
|
||||
#define WR6202_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
#define WR6202_GPIO_USB_POWER 11
|
||||
|
||||
#define WR6202_GPIO_LED_3G 13
|
||||
#define WR6202_GPIO_LED_WPS 14
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition wr6202_partitions[] = {
|
||||
{
|
||||
.name = "uboot",
|
||||
.offset = 0,
|
||||
.size = 0x030000,
|
||||
}, {
|
||||
.name = "uboot-config",
|
||||
.offset = 0x030000,
|
||||
.size = 0x040000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "factory",
|
||||
.offset = 0x040000,
|
||||
.size = 0x050000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "linux",
|
||||
.offset = 0x050000,
|
||||
.size = 0x100000,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = 0x150000,
|
||||
.size = 0x6B0000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct physmap_flash_data wr6202_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.nr_parts = ARRAY_SIZE(wr6202_partitions),
|
||||
.parts = wr6202_partitions,
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct gpio_led wr6202_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "wr6202:blue:wps",
|
||||
.gpio = WR6202_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "wr6202:blue:3g",
|
||||
.gpio = WR6202_GPIO_LED_3G,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_button wr6202_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.threshold = 3,
|
||||
.gpio = WR6202_GPIO_BUTTON_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.threshold = 3,
|
||||
.gpio = WR6202_GPIO_BUTTON_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init wr6202_init(void)
|
||||
{
|
||||
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
|
||||
|
||||
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
|
||||
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio),
|
||||
wr6202_leds_gpio);
|
||||
ramips_register_gpio_buttons(-1, WR6202_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(wr6202_gpio_buttons),
|
||||
wr6202_gpio_buttons);
|
||||
|
||||
/* Power to the USB port is controlled by GPIO line */
|
||||
gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER");
|
||||
gpio_direction_output(WR6202_GPIO_USB_POWER, 0);
|
||||
gpio_free(WR6202_GPIO_USB_POWER);
|
||||
|
||||
rt305x_register_flash(0, &wr6202_flash_data);
|
||||
rt305x_register_ethernet();
|
||||
rt305x_register_wifi();
|
||||
rt305x_register_wdt();
|
||||
rt305x_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202",
|
||||
wr6202_init);
|
||||
|
|
@ -167,6 +167,16 @@ define Image/Build/Template/NW718
|
|||
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
|
||||
endef
|
||||
|
||||
console_WR6202=ttyS1,115200
|
||||
mtdlayout_WR6202=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
|
||||
define Image/Build/Template/WR6202
|
||||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_WR6202),mtdlayout_WR6202,1048576,7012352)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/WR6202
|
||||
$(call Image/Build/Template/WR6202,$(1),wr6202,WR6202)
|
||||
endef
|
||||
|
||||
console_OMNIEMB=ttyS1,57600
|
||||
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
|
||||
define Image/Build/Template/OMNIEMB
|
||||
|
|
@ -328,6 +338,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/WR5123GN,$(1))
|
||||
$(call Image/Build/Profile/WL341V3,$(1))
|
||||
$(call Image/Build/Profile/WL351,$(1))
|
||||
$(call Image/Build/Profile/WR6202,$(1))
|
||||
endef
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -112,6 +112,7 @@ CONFIG_RT305X_MACH_WHR_G300N=y
|
|||
CONFIG_RT305X_MACH_WL341V3=y
|
||||
CONFIG_RT305X_MACH_WL351=y
|
||||
CONFIG_RT305X_MACH_WR512_3GN=y
|
||||
CONFIG_RT305X_MACH_WR6202=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RT288X=y
|
||||
|
|
|
|||
Loading…
Reference in New Issue