Minor patch to the AR7 diag.sh to make the status LED a bit more useful. From the patch:

This setup gives us 3.5 distinguishable states:

- Solid OFF:  Bootloader running, or kernel hung (timer task stalled)
- Solid ON:   Kernel hung (timer task stalled)
- 5Hz blink:  preinit
- Heartbeat:  normal operation

Signed-off-by: oliver@opencloud.com


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9666 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar7/base-files/etc/diag.sh

@@ -1,19 +1,26 @@
 #!/bin/sh
 # Copyright (C) 2007 OpenWrt.org
 
-set_led() {
+# This setup gives us 3.5 distinguishable states:
-	local led="$1"
+#
-	local state="$2"
+# Solid OFF:  Bootloader running, or kernel hung (timer task stalled)
-	[ -d "/sys/class/leds/$led" ] && echo "$state" > "/sys/class/leds/$led/brightness"
+# Solid ON:   Kernel hung (timer task stalled)
-}
+# 5Hz blink:  preinit
+# Heartbeat:  normal operation
 
 set_state() {
         case "$1" in
                 preinit)
-			set_led status 255
+                        [ -d /sys/class/leds/status ] && {
+                                echo timer >/sys/class/leds/status/trigger
+                                echo 100 >/sys/class/leds/status/delay_on
+                                echo 100 >/sys/class/leds/status/delay_off
+                        }
                 ;;
                 done)
-			set_led status 0
+                        [ -d /sys/class/leds/status ] && {
+                                echo heartbeat >/sys/class/leds/status/trigger
+                        }
                 ;;
         esac
 }